This is what we came here for: Hang dev_t's from their cdevsw,
refcount cdevsw and dev_t and generally keep track of things a lot
better than we used to:
Hold a cdevsw reference around all entrances into the device driver,
this will be necessary to safely determine when we can unload driver
code.
Hold a dev_t reference while the device is open.
KASSERT that we do not enter the driver on a non-referenced dev_t.
Remove old D_NAG code, anonymous dev_t's are not a problem now.
When destroy_dev() is called on a referenced dev_t, move it to
dead_cdevsw's list. When the refcount drops, free it.
Check that cdevsw->d_version is correct. If not, set all methods
to the dead_*() methods to prevent entrance into driver. Print
warning on console to this effect. The device driver may still
explode if it is also incompatible with newbus, but in that case
we probably didn't get this far in the first place.
Remove the unused second argument from udev2dev().
Convert all remaining users of makedev() to use udev2dev(). The
semantic difference is that udev2dev() will only locate a pre-existing
dev_t, it will not line makedev() create a new one.
Apart from the tiny well controlled windown in D_PSEUDO drivers,
there should no longer be any "anonymous" dev_t's in the system
now, only dev_t's created with make_dev() and make_dev_alias()
Add empty line before first code line in functions with no local
variables.
Properly terminate comment sentences.
Indent lines which are longer that 80 characters.
Move v_addpollinfo closer to the rest of poll-related functions.
Move DEBUG_VFS_LOCKS ifdefed block to the end of file.
Obtained from: bde (partly)
reassigning their v_ops field to specfs, detaching from the mountpoint, etc.
However, this is not sufficient. If we vclean() the vnode the pages owned
by the vnode are lost, potentially while buffers reference them. Implement
parts of vclean() seperately in vgonechrl() so that the pages and bufs
associated with a device vnode are not destroyed while in use.
thread being waken up. The thread waken up can run at a priority as
high as after tsleep().
- Replace selwakeup()s with selwakeuppri()s and pass appropriate
priorities.
- Add cv_broadcastpri() which raises the priority of the broadcast
threads. Used by selwakeuppri() if collision occurs.
Not objected in: -arch, -current
Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to
operate on this mutex transparently.
Eventually new mutex will be protecting more fields in
struct mount, not only vnode list.
Discussed with: jeff
LK_RETRY either, we don't want this vnode if it turns into another.
- Remove the code that checks the mount point after acquiring the lock
we are guaranteed to either fail or get the vnode that we wanted.
- In vtryrecycle() try to vgonel the vnode if all of the previous checks
passed. We won't vgonel if someone has either acquired a hold or usecount
or started the vgone process elsewhere. This is because we may have been
removed from the free list while we were inspecting the vnode for
recycling.
- The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling
the same vnode. To further reduce the likelyhood of this event, requeue
the vnode on the tail of the list prior to calling vtryrecycle(). We can
not actually remove the vnode from the list until we know that it's
going to be recycled because other interlock holders may see the VI_FREE
flag and try to remove it from the free list.
- Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it
regardless of MNT_WAIT because the vnode does not actually belong to
this filesystem.
purge, the purge in vclean, and the filesystems purge, we had 3 purges
per vnode.
- Move the insmntque(vp, 0) to vclean() so that we may remove it from the
two vgone() functions and reduce the number of lock operations required.
whether or not the sync failed. This could potentially get set between
the time that we VOP_UNLOCK and VI_LOCK() but the race would harmelssly
lead to the sync being delayed by an extra 30 seconds. If we do not move
the vnode it could cause an endless loop if it continues to fail to sync.
- Use vhold and vdrop to stop the vnode from changing identities while we
have it unlocked. Other internal vfs lists are likely to follow this
scheme.
- Create a new function, vgonechrl(), which performs vgone for an in-use
character device. Move the code from vflush() that did this into
vgonechrl().
- Hold the xlock across the entirety of vgonel() and vgonechrl() so that
at no point will an invalid vnode exist on any list without XLOCK set.
- Move the xlock code out of vclean() now that it is in the vgone*()
functions.
This is so that we may grab the interlock while still holding the
sync_mtx. We have to VI_TRYLOCK() because in all other cases the lock
order runs the other way.
- If we don't meet any of the preconditions, reinsert the vp into the
list for the next second.
- We don't need to panic if we fail to sync here because each FSYNC
function handles this case. Removing this redundant code also
simplifies locking.
fail. Remove the panic from that case and document why it might fail.
- Document the reason for calling cache_purge() on a newly created vnode.
- In insmntque() order the operations so that we can call mtx_unlock()
one fewer times. This makes the code somewhat clearer as well.
- Add XXX comments in sched_sync() and vflush().
- In vget(), do not sleep while waiting for XLOCK to clear if LK_NOWAIT is
set.
- In vclean() we don't need to acquire a lock around a single TAILQ_FIRST
call. It's ok if we race here, the vinvalbuf will just do nothing.
- Increase the scope of the lock in vgonel() to reduce the number of lock
operations that are performed.
Doing so creates a race where the buf is on neither list.
- Only vfree() in an error case in vclean() if VSHOULDFREE() thinks we
should.
- Convert the error case in vclean() to INVARIANTS from DIAGNOSTIC as this
really should not happen and is fast to check.
size and the kernel's heap size, specifically, vm_kmem_size. This
function allows a maximum of 40% of the vm_kmem_size to be used for
vnodes and vm objects. This is a conservative bound based upon recent
problem reports. (In other words, a slight increase in this percentage
may be safe.)
Finally, machines with less than ~3GB of RAM should be unaffected
by this change, i.e., the maximum number of vnodes should remain
the same. If necessary, machines with 3GB or more of RAM can increase
the maximum number of vnodes by increasing vm_kmem_size.
Desired by: scottl
Tested by: jake
Approved by: re (rwatson,scottl)
the vnode and restart the loop. Vflush() is vulnerable since it does not
hold a reference to the vnode and it holds no other locks while waiting
for the vnode lock. The vnode will no longer be on the list when the
loop is restarted.
Approved by: re (rwatson)
desired buffer is found at one of the roots more than 60% of the time.
Thus, checking both roots before performing either splay eliminates
unnecessary splays on the first tree splayed.
Approved by: re (jhb)
synchronization primitives from inside DDB is generally a bad idea,
and in this case it frequently results in panics due to DDB commands
being executed from the sio fast interrupt context on a serial
console. Replace the locking with a note that a lack of locking
means that DDB may get see inconsistent views of the mount and vnode
lists, which could also result in a panic. More frequently,
though, this avoids a panic than causes it.
Discussed with ages ago: bde
Approved by: re (scottl)
trustworthy for vnode-backed objects.
- Restore the old behavior of vm_object_page_remove() when the end
of the given range is zero. Add a comment to vm_object_page_remove()
regarding this behavior.
Reported by: iedowse
- Eliminate an odd, special-case feature:
if start == end == 0 then all pages are removed. Only one caller
used this feature and that caller can trivially pass the object's
size.
- Assert that the vm_object is locked on entry; don't bother testing
for a NULL vm_object.
- Style: Fix lines that are longer than 80 characters.
- Add a parameter to vm_pageout_flush() that tells vm_pageout_flush()
whether its caller has locked the vm_object. (This is a temporary
measure to bootstrap vm_object locking.)
possible for some time.
- Lock the buf before accessing fields. This should very rarely be locked.
- Assert that B_DELWRI is set after we acquire the buf. This should always
be the case now.
requiring locked bufs in vfs_bio_awrite(). Previously the buf could
have been written out by fsync before we acquired the buf lock if it
weren't for giant. The cluster_wbuild() handles this race properly but
the single write at the end of vfs_bio_awrite() would not.
- Modify flushbufqueues() so there is only one copy of the loop. Pass a
parameter in that says whether or not we should sync bufs with deps.
- Call flushbufqueues() a second time and then break if we couldn't find
any bufs without deps.
Remove extraneous uses of vop_null, instead defering to the default op.
Rename vnode type "vfs" to the more descriptive "syncer".
Fix formatting for various filesystems that use vop_print.
