Commit Graph

44 Commits

Author SHA1 Message Date
Warner Losh
822ddbd8f7 MIN unused, so kill it 1999-10-25 04:28:53 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Warner Losh
d17298bf1c Kill unused includes 1999-10-11 19:05:21 +00:00
Matthew N. Dodd
fe76c677ea Use the PRVERB() macro instead of 'if (bootverbose) printf()...
Add debuging for all failure cases in aha_cmd().

Always check DATAIN_REG_READY even if we're ready to exit the
read loop.

The last fix allows the AHA-1640 MCA SCSI adapter to operate
correctly and likely fixes problems on a few other oddball
adapters. (I suspect my Dell Drive Array in 1540 mode needs this.)

Reviewed by:	Warner Losh
1999-10-02 17:40:07 +00:00
Matthew N. Dodd
288778409b Add support for the AHA-1640 SCSI adapter.
The changes to sys/dev/aha/aha.c that allow these
cards to function properly will be here in a day
or 2.
1999-10-01 03:12:15 +00:00
Warner Losh
d77db02192 Use rmand_get_bus{tag,handle} rather than hard wiring things to
I386_BUS_SPACE_IO.  Compiles now on the Alpha, but likely will not
work due to bus space address <-> virtual address mapping bogons that
work for i386 but not alpha.
1999-09-28 19:59:41 +00:00
Warner Losh
896f49b096 Newbusification of aha. dfr sent me the first cut, and I made it
work.  Be more verbose when one cannot allocate IRQ, et al since this
is a common configuration problem.  The cards have the IRQ soft wired
into their BIOS and do not try to do collision detection.  This can
cause problems when this IRQ is the same as another card/device.

The PNP hasn't been tested.  My PNP board is in a deployed system.
I'll sneak in testing of it sometime later.  I've been able to mount
the 3.3R cdrom that arrived today and access files off it.

Submitted by: dfr
1999-09-28 02:39:45 +00:00
Doug Rabson
4c2212401b Remove vestiges of old pnp code. 1999-09-03 20:11:25 +00:00
Peter Wemm
ae5d5ac013 Missed this use of the old pnp includes. I don't think this is meant to
be here though.
1999-09-02 05:59:20 +00:00
Peter Wemm
a3d5686298 Stub out the old pnp code till these are converted so GENERIC builds again. 1999-09-02 04:37:07 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
086646f7c6 Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.
1999-08-16 01:52:21 +00:00
Justin T. Gibbs
378d6d7395 The 1542 cards do not allow adapter commands to be queued while mailbox
commands are outstanding.  You'd think they'd just clear the IDLE bit,
but alas, no.  Delay until all pending mailbox commands have completed
in aha_cmd to work around this.

Report sync rates correctly on Fast Adaptec cards.  Clones may still be
reported incorrectly since there is no documenation on how they report
extended sync values.

Clean up some unused fields in the aha softc.
1999-05-25 20:15:20 +00:00
Warner Losh
fca33042ed Put a small delay in before sending the inquire_setup command. The
docs don't seem to shed light on why this is needed, but reports from
the field indicate this helps prevent problems in this area.  Ken's
changes seem to have exposed this bug, rather than caused it, as far
as I can tell.

Thanks to Jack O'Neill for tracking this down.

Submitted by: jack@germanium.xtalwind.net

Very strong 3.2 merge candidate.
1999-05-14 23:10:25 +00:00
Warner Losh
ca0cc0c9be Add another kludge to the card identification probe. It appears that
some aha 1542B cards will return 0x7f for the unimplemented GEOMETRY
register.

This is a good 3.2 candidate.

PR: 11469
Submitted by: Thomas David Rivers
1999-05-11 08:12:11 +00:00
Peter Wemm
ac0c5aaf01 Use haveseen_ioport() which is now connected up to the resource manager. 1999-05-08 18:20:57 +00:00
Peter Wemm
1ce418a67d ahatimeout is static.. 1999-05-06 22:18:21 +00:00
Kenneth D. Merry
9deea8574e Add a number of interrelated CAM feature enhancements and bug fixes.
NOTE:  These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface.  A make world is recommended.

camcontrol.[c8]:
 - We now support two new commands, "tags" and "negotiate".

	- The tags commands allows users to view the number of tagged
	  openings for a device as well as a number of other related
	  parameters, and it allows users to set tagged openings for
	  a device.

	- The negotiate command allows users to enable and disable
	  disconnection and tagged queueing, set sync rates, offsets
	  and bus width.  Note that not all of those features are
	  available for all controllers.  Only the adv, ahc, and ncr
	  drivers fully support all of the features at this point.
	  Some cards do not allow the setting of sync rates, offsets and
	  the like, and some of the drivers don't have any facilities to
	  do so.  Some drivers, like the adw driver, only support enabling
	  or disabling sync negotiation, but do not support setting sync
	  rates.

 - new description in the camcontrol man page of how to format a disk
 - cleanup of the camcontrol inquiry command
 - add support in the 'devlist' command for skipping unconfigured devices if
   -v was not specified on the command line.
 - make use of the new base_transfer_speed in the path inquiry CCB.
 - fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

 - new flags on many CCB function codes to designate whether they're
   non-immediate, use a user-supplied CCB, and can only be passed from
   userland programs via the xpt device.  Use these flags in the transport
   layer and pass driver to categorize CCBs.

 - new flag in the transport layer device matching code for device nodes
   that indicates whether a device is unconfigured

 - bump the CAM version from 0x10 to 0x11

 - Change the CAM ioctls to use the version as their group code, so we can
   force users to recompile code even when the CCB size doesn't change.

 - add + fill in a new value in the path inquiry CCB, base_transfer_speed.
   Remove a corresponding field from the cam_sim structure, and add code to
   every SIM to set this field to the proper value.

 - Fix the set transfer settings code in the transport layer.

scsi_cd.c:

 - make some variables volatile instead of just casting them in various
   places
 - fix a race condition in the changer code
 - attach unless we get a "logical unit not supported" error.  This should
   fix all of the cases where people have devices that return weird errors
   when they don't have media in the drive.

scsi_da.c:

 - attach unless we get a "logical unit not supported" error

scsi_pass.c:

 - for immediate CCBs, just malloc a CCB to send the user request in.  This
   gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

 - change the CAM ioctls to use the CAM version as their group code.

adv driver:

 - Allow changing the sync rate and offset separately.

adw driver

 - Allow changing the sync rate and offset separately.

aha driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

 - Allow setting offset and sync rate separately

bt driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

 - Fix the ultra/ultra 2 negotiation bug
 - allow setting both the sync rate and offset separately

Other HBA drivers:
 - Put code in to set the base_transfer_speed field for
   XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by:	gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Eivind Eklund
505ab9b86b Staticize. 1999-04-11 02:55:52 +00:00
Warner Losh
ec0211864c Better logging when the Geometry register probe fails. 1999-03-02 20:56:07 +00:00
Warner Losh
07353d4247 o enable plug and play support for the aha driver. Given the cumbersome
pnp system in freebsd, I'm not sure how useful this will be, but my
  1542CP seems to work well in plug and play mode and does seem to
  probe correctly at all the oddball addresses/irq/drqs that I tried.
  [[
     I was unable to get /kernel.conf or /kernel.config to read in, so
     I wasn't able to verify that this method of userconfig works.  that's
     one thing that makes pnp so hard to use in the current scheme.
     Pointers to the right new way of doing this accepted.
  ]]
o Add some kludges to maybe bring support for 1540A/1542A into the
  driver.  Since I have no 154xA cards, and the only person I know
  that has them hasn't given me feedback, I'm making this commit
  blind.
o Honor unit numbers that are in the config file now.  This allows one
  to hard wire the unit numbers (and have high unit numbers for plug
  and pray devices, which can't seem to be hardwired) and have the
  cards not migrate from aha1 -> aha0 should aha0 go on the fritz.  I
  didn't verify that hard wired scsi busses would work, but did verify
  that hard wired aha addresses did work to a limited extent.  Both
  aha0 and aha1 must be hardwired, or when the card that was in aha0
  goes away, the probe for aha0 might pick up the card that otherwise
  would have been aha1.
1999-01-20 06:21:27 +00:00
Warner Losh
ed994fe86a Invalid is spelled with the v *BEFORE* the a. 1998-12-22 22:31:06 +00:00
Justin T. Gibbs
e84c798977 Don't calculate the residual twice. 1998-12-22 18:14:50 +00:00
Warner Losh
b128b9cf2a o Convert length of hccb to integer from the array. Eivind Eklund
pointed this out, but I've not seen a manifestation of this.
o Check against 0x00 as well as 0xff for geometry register, as some clone
  cards don't return 0xff.  Vadim Mikhailov pointed this out in PR
  8743 for his Dell SCSI Array controller working in AHA-1540
  emulation mode.  Note that this test is likely to go away in the
  future in favor of a better one Justin has recommended.
1998-12-15 02:51:54 +00:00
Justin T. Gibbs
0aae7eb02e Pull in fixes similar to those recently committed to the bt driver:
- For transactions of 0 length, us a non-residual checking CCB type.

 - Preserve command status if our interrupt handler completes a command
   while we are polling for completion in aha_cmd.
1998-12-13 00:05:04 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Warner Losh
46d4978e39 o Patch, slightly altered, from Graham Menhennitt for older aha 1542B
cards.  My machine didn't tickle this problem, so I can't tell if
  it fixed anything or not.  However, it didn't break my already working
  1542-{B,C,CF,CP} probes.
o Minor comment correction
o Minor correction in printf
1998-11-25 19:12:56 +00:00
Justin T. Gibbs
712463b1fa Noop Commit - Change was in last revision.
If the next available mailbox is not in the free state, print a warning
and handle the condition as a temporary resource shortage.  The condition
should never happen, but we shouldn't panic since recovery is possible.
1998-11-10 06:47:11 +00:00
Justin T. Gibbs
3c1cabf7a2 Fix probes when a port address is specified. 1998-11-10 06:44:54 +00:00
Justin T. Gibbs
d0993d7584 Fix probes when a port address is specified.
Convert from BT'isms to AHA'isms

Don't fail the probe if the illegal command bit is set in the status
register.  If the BusLogic MultiMaster probe preceeded us, it may well
have determined that the card we are attaching to was not a true MultiMaster
by sending us a command that fails on the 154X.

Reset the adapter before doing the inquiry.  This provides extra sanity
and will also clear the illegal command status bit that my be left over
from the MultiMaster probe.
1998-11-10 06:44:42 +00:00
Justin T. Gibbs
4663e36736 -Wunused cleanup.
Submitted by:	Poul-Henning Kamp <phk@freebsd.org>
1998-10-15 23:46:33 +00:00
Warner Losh
ca1a3d8c33 Reduce the number of ccbs to 16, per the aha documentation. Move
bogus comment to proper place.

This should fix the hangs people are seeing under very heavy load, at
least it does for me.  Please let me know if you continue to have
problems.
1998-10-15 19:53:30 +00:00
Warner Losh
bb415a7e88 Fix breakage introduced by last patch. bde has added CC_QUIET flag to
hasseen_isadev so this will be less noisy when conflicts do exist.
Also eliminate redundant warnings about conflicts.

Requested by: bde
Reviewed by: gibbs
1998-10-12 18:53:33 +00:00
Warner Losh
19bed41a5d Fix conficts in probe:
o For bt and aha only probe the one I/O range if a specific I/O is specified
  in the config file.
o Don't even try to probe I/O ranges that have been seen already.
o If we conflict with an IRQ or DRQ, then fail the probe.

Requested by: bde, gibbs
Approved by: jkh
1998-10-10 00:44:12 +00:00
Justin T. Gibbs
9574f7968d Hook up ahapoll so that dumps, synchronize cache commands or any other
command that comes in through xpt_polled_action works correctly.
1998-10-09 21:38:36 +00:00
Warner Losh
27af0eb7b6 GC unused stuff. 1998-10-02 04:37:49 +00:00
Warner Losh
667b14c256 Misc cleanup and probe rework:
o Use the board id command to find out what kind of board
	  we're talking to.  If we're talking to a board that is has
	  an ID that is shared between boards supported by the aha
	  driver and the bt driver, then use the bt's geometry
	  register to weed out the bt cards.  Otherwise assume that we
	  support this card.
	o Remove bt esetup command sending to the card.  It seems to
	  wedge too many cards.
	o Revert to doing a soft reset after an invalid command.  This
	  change didn't fix anything, so I'm backing it out.  The
	  whole issue of card resetting needs to be revisisted at some
	  point so that we can do it properly on all hardware.
	o GC unused stuff in some places.
1998-10-01 04:53:55 +00:00
Warner Losh
6a04333133 Perform a hard reset on cards when the command fails. This should help
those people that have cards that become wedged when a bogus command is
issued that are too wedged to have a soft reset help.
1998-09-30 00:10:44 +00:00
Warner Losh
8d74c4aa15 Several minor cleanups, inspired by bug reports and the old driver:
o Unlock mailbox interface if we have a new card.  Before only newer cards
  (B or newer) that had the BIOS disabled would probe.  Cards with the
  BIOS enabled would fail to probe in the mailbox initialization code.
o Increase the number of ccbs and sg to 17 from 16 to support 64k I/O
  on a non page aligned boundary.  Ideas for dynamic determination of this
  value welcomed, as more of these are better.
o Took credit for this driver, even though I derived it from Justin's code.
  Made sure that Justin's copyright from bt.c was preserved, along with
  his name, since the error handling code is nearly identical.  Add my
  own, identical copyright.  Point people to aha_isa.c.

Cards tested: 1542C and 1542CF.  The B and CP might work now as well,
but logistical problems precluded me from testing them this evening
(if you have jumper settings for the B card, please send me private
mail).
1998-09-29 06:50:21 +00:00
Bruce Evans
f28d6834e1 Removed unused include of "ioconf.h" again. The CAM changes made ioconf.h
empty but regressed to including it here.
1998-09-24 10:43:42 +00:00
Justin T. Gibbs
c2921d36a9 Use %p with (void *) casts to print pointers with printf. 1998-09-17 00:08:29 +00:00
Justin T. Gibbs
6954e80f7b Fix printf format bugs. 1998-09-16 03:27:12 +00:00
Justin T. Gibbs
5d55526b65 Adaptec 154X SCSI-Host Adapter driver for CAM.
Submitted by:	Warner Losh <imp@village.org>
1998-09-15 07:39:55 +00:00