Commit Graph

147 Commits

Author SHA1 Message Date
Alexander Motin
fdc5dd2d2f MFcalloutng:
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
2013-02-28 13:46:03 +00:00
Pedro F. Giffuni
646a7fea0c Clean some 'svn:executable' properties in the tree.
Submitted by:	Christoph Mallon
MFC after:	3 days
2013-01-26 22:08:21 +00:00
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
Eitan Adler
db702c59cf remove duplicate semicolons where possible.
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:00:37 +00:00
Attilio Rao
a42ac676f5 Disconnect non-MPSAFE NTFS from the build in preparation for dropping
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.

In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.

This is not targeted for MFC.
2012-10-17 11:30:00 +00:00
Dag-Erling Smørgrav
9189ae71fa auth.conf is dead. 2012-06-12 17:04:56 +00:00
Juli Mallett
379663d70b o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern
required for the ABI the kernel is being built for.
   XXX This is implemented in a kind-of nasty way that involves including source
       files, but it's still an improvement.
o) Retire ISA_* options since they're unused and were always wrong.
2012-03-12 21:25:32 +00:00
Juli Mallett
312af517e3 Remove platform APIs which are not used by any code and which had only stub
implementations or no implementation on all platforms.

Some of these functions might be good ideas, but their semantics were unclear
given the lack of implementation, and an unlucky porter could be fooled into
trying to implement them or, worse, being baffled when something like
platform_trap_enter() failed to be called.
2012-03-12 07:34:15 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Kevin Lo
281f0ca8e7 Remove duplicate header includes 2011-06-26 10:07:48 +00:00
Attilio Rao
f89d6b3f06 Fix a brain-o in platform_cpu_mask() by just specifying a possible
cpuset_t to be copied, rather than return the array.
I can't rely anymore on this being a simple int/long object.

Reported by:	art
2011-05-13 19:56:58 +00:00
Attilio Rao
245a253538 Add the cpuset_t conversion for mips. 2011-05-13 16:42:05 +00:00
John Baldwin
b67d11bbcc Change rman_manage_region() to actually honor the rm_start and rm_end
constraints on the rman and reject attempts to manage a region that is out
of range.
- Fix various places that set rm_end incorrectly (to ~0 or ~0u instead of
  ~0ul).
- To preserve existing behavior, change rman_init() to set rm_start and
  rm_end to allow managing the full range (0 to ~0ul) if they are not set by
  the caller when rman_init() is called.
2011-04-29 18:41:21 +00:00
Hans Petter Selasky
b0a5e05f62 We don't need to call EOWRITE4(sc, EHCI_USBINTR, 0) directly from each EHCI
bus driver at detach, hence ehci_detach() does exactly this since r199718.

Submitted by:	Luiz Otavio O Souza
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-12 07:49:11 +00:00
Hans Petter Selasky
3ea3537594 - Correct EHCI interrupt disabling at detach.
Submitted by:	Luiz Otavio O Souza
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 20:17:49 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Juli Mallett
1591f3f18c Allow the platform code to return a bitmask of running cores rather than just
a number of cores, this allows for a sparse set of CPUs.  Implement support
for sparse core masks on Octeon.

XXX jeff@ suggests that all_cpus should include cores that are offline or
    running other applications/OSes, so the platform API should be further
    extended to allow us to set all_cpus to include all cores that are
    physically-present as opposed to only those that are running FreeBSD.

Submitted by:	Bhanu Prakash (with modifications)
Reviewed by:	jchandra
Glanced at by:	kib, jeff, jhb
2011-02-12 02:08:24 +00:00
Jayachandran C.
8026971f99 Move 'cpu CPU_RMI' to std.xlr, this is common for all XLR cpus. 2011-01-20 12:45:29 +00:00
Jayachandran C.
1104442832 Fixes in the XLR platform code
- Fix bug in pic.h, assign reg variable, before return.
- In xlr_pci.c, need to ignore the result of mmio read.
2011-01-20 08:08:19 +00:00
Matthew D Fleming
cbc134ad03 Introduce signed and unsigned version of CTLTYPE_QUAD, renaming
existing uses.  Rename sysctl_handle_quad() to sysctl_handle_64().
2011-01-19 23:00:25 +00:00
Juli Mallett
166bee2858 Fix format of physical addresses; this fixes the n32 build. 2011-01-19 21:45:40 +00:00
Jayachandran C.
611f086953 Support for 64 bit PTEs on n32 and n64 compilation.
In n32 and n64, add support for physical address above 4GB by having
64 bit page table entries and physical addresses. Major changes are:
- param.h: update PTE sizes, masks and shift values to support 64 bit PTEs.
- param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as
  ptoa), and reformat.
- param.h: remove casting to unsigned long in trunc_page and round_page
  since this will be used on physical addresses.
- _types.h: have 64 bit __vm_paddr_t for n32.
- pte.h: update TLB LO0/1 access macros to support 64 bit PTE
- pte.h: assembly macros for PTE operations.
- proc.h: md_upte is now 64 bit for n32 and n64.
- exception.S and swtch.S: use the new PTE macros for PTE operations.
- cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64.
- xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are
  supported now.

Reviewed by:	jmallett (earlier version)
2011-01-13 15:17:29 +00:00
Jayachandran C.
ab7a71f6e7 The message ring interrupt needs to be enabled for all cpus, not just
the ones which run the message ring handler.

Some bits of the interrupt mask are part of the status register which is
saved with the process context, and these bits are initialized from the
cpu on which the process is created. This means that all the processes
should have the same value for these interrupt mask bits, so that the
interrupt mask remains the same regardless of what thread is scheduled
on the cpu.

Submitted by:	Sriram Gorti (srgorti at netlogicmicro dot com)
2011-01-12 13:16:35 +00:00
John Baldwin
58ccf5b41c Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by:	bde
2011-01-11 13:59:06 +00:00
John Baldwin
c305730dc0 Remove bogus usage of INTR_FAST. "Fast" interrupts are now indicated by
registering a filter handler rather than a threaded handler.  Also remove
a bogus use of INTR_MPSAFE for a filter.
2011-01-06 21:08:06 +00:00
Jayachandran C.
d0beb2c412 Updates for I2C devices on XLR engg boards.
- ds1374u : use multi-byte write.
- at24co2n, max6657: remove mutex, iicbus has the necessary locking.

Submitted by:	Sreekanth M. S. (kanthms at netlogicmicro com)
2010-12-13 17:53:38 +00:00
Andriy Gapon
bc8022ea4a fix mips build breakage introduced in r216375: atomic_store_int doesn't exists
1) 32-bit assignment are expected to always be atomic.
2) Release/acquire memory barrier semantics doesn't seem to be needed here.
So a simple assignment can be used.

Remove unused port_set_counter() while here, it also used to mis-use
atomic_set_int().

Reported by:	jhb
Pointyhat to:	avg
MFC after:	3 weeks
2010-12-13 14:30:35 +00:00
Jayachandran C.
3ba09158c8 I2C drivers for XLR/XLS processors.
- Major update to xlr_i2c.c: do multi-byte ops correctly, remove unnecessary
  code, add mutex to protect bus operations, style(9) fixes.
- Drivers for I2C devices on XLR/XLS engineering boards, ds1374u RTC, max6657
  temparature sensor and at24co2n EEPROM.

Submitted by:	Sreekanth M. S. (kanthms at netlogicmicro com)
2010-12-12 06:00:26 +00:00
Andriy Gapon
4fa9db8da0 fix atomic_set_xxx misuse in rge
It seems that atomic_set_xxx and atomic_store_xxx were confused.

Reviewed by:	jhb (general issue)
MFC after:	3 weeks
2010-12-11 10:21:38 +00:00
Jayachandran C.
96417c3f8c Fix compilation when DEBUG option is enabled.
- remove unused code in mips/rmi/xlr_pci.c
- remove unused variable in mips/rmi/dev/nlge/if_nlge.c
- fix reference to old function in mips/mips/pmap.c

Reported by:	Prabhath Raman (prabhath at netlogicmicro com)
2010-12-09 12:30:13 +00:00
Oleksandr Tymoshenko
bd01e50ca0 - dump_avail layout should be sequence of [start, end)
pairs, not <start, size>.

Spotted by: alc@
2010-12-09 07:47:40 +00:00
Oleksandr Tymoshenko
99629fa36d - Populate dump_avail with proper values from phys_avail 2010-12-09 07:01:03 +00:00
Jayachandran C.
1e8b029539 Use if_transmit method instead of if_start, this avoids the interface queue lock.
Use the hardware IP checksum verification on receive.

Submitted by:	Sriram Gorti (srgorti at netlogicmicro dot com)
2010-11-27 13:35:19 +00:00
Dimitry Andric
3e288e6238 After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
Dimitry Andric
31c6a0037e Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
2010-11-14 20:38:11 +00:00
Jayachandran C.
7850efa68d Network driver updates
- Fix network driver issue on a XLS eval board (major# 8).
- Fix issue uncovered by r213475 in check for XGMII

Submitted by:	Sriram Gorti (srgorti at netlogicmicro dot com)
2010-10-20 09:50:11 +00:00
Jayachandran C.
18ad6a4db2 On uniprocessor, warn and fixup hardware cpu mask if more than on CPU
is enabled by the bootloader.
2010-10-20 09:41:36 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Jayachandran C.
8d4380adbf PCI fix for XLR C revision chips, limit DMA address to the first 2GB
physical address.  Adds a dma tag to the XLR/XLS pci bus with the
lowaddr if the CPU happens to be a XLR C rev.

Submitted by:	Sreekanth M. S. (kanthms at netlogicmicro dot com))
2010-10-06 15:37:55 +00:00
Jayachandran C.
49f4ceab51 XLR/XLS network driver (nlge) updates:
- nlge_ioctl handles IFF_UP and IFF_PROMISC flags
- Translate table code, to enable flow based CPU assignment added
  disabled by default (can be enabled by a tunable).
- Changed signature of nlge_port_disable to make it consistent with nlge_port_enable
- Removed TXCSUM and VLAN_HW_TAGGING from i/f capabilities.

Submitted by:	Sriram Gorti (srgorti at netlogicmicro dot com)
2010-10-06 08:15:28 +00:00
Jayachandran C.
a5e14d3c15 Fix n64 compile. 2010-10-06 08:09:39 +00:00
Jayachandran C.
8cd156782f Network driver support for more XLR/XLS chip versions.
Obtained from:	Sriram Gorti (srgorti at netlogicmicro dot com)
2010-10-05 07:41:59 +00:00
Jayachandran C.
8878298b7a Clear any pending interrupts after disabling FMN interrupts. Add debugging
sysctl and counters for message ring threads (intial version). Update
watermark values, and and decrease the maximum threads to 3 (this will leave
a few CPUs for other processes)

Minor comment fix in nlge.
2010-10-05 06:44:47 +00:00
Jayachandran C.
2859cf2ad2 Fix asm for XKPHYS read for o32, constriants needed for input registers
that are clobbered.  Fixes a crash when compiled without DEBUG
2010-10-05 05:49:38 +00:00
Jayachandran C.
b0a36f6a91 Update message ring handling code for XLR/XLS
- Wakeup multiple threads per core using message ring watermark interrupts.
- Update message ring handler registration, use the real device station id
  for registering interrupts.
- rge/nlge: update for the new message ring registration code.
- rge/nlge: use 2 message ring stations for incoming packets, this will
  allow more messages to be queued.
- nlge: comment fixes, remove unused variable
- style and whitespace fixes
2010-10-03 04:33:58 +00:00
Jayachandran C.
da4dad492d XLS B0 revision PCI support and related changes.
- XLS B0 and later revision chips have PCIe link 2 & 3 mapped to different
  PIC interrupts. Update pic.h, board.h and xlr_pci.c to reflect this.
- remove debug prints in xlr_pci.c
- add more processor IDs to board.h, add function xlr_is_xls_b0()
- some style(9) and whitespace fixes
2010-09-27 14:50:51 +00:00
Jayachandran C.
f294c94440 n32 fixes for nlge.
Use correct define (__mips_n64) for n64 compilation and use correct
parameter type for xlr_paddr_lw() in n32.
2010-09-21 07:58:47 +00:00
Jayachandran C.
75e70f56a2 Add 64 bit support to nlge, and additional fixes
- 64 bit fixes for ifnlge.c
- Use m_nextpkt to save mbuf vaddr on 64 bit, we cannot store the
  64 bit vaddr  in the 40bit freeback field.
- remove unused code and unnecessary variables.
- use xlr_io_mmio macro instead of adding io base address
- rewrite GPIO related code to fixup nlge using xlr_write_reg and DELAY
- support for engg boards major num 11 and 12
- add xlr_paddr_lw() to load 32bit value from physical address, fix
  inline assembly
- style fixes
2010-09-20 11:53:57 +00:00