Commit Graph

68 Commits

Author SHA1 Message Date
Poul-Henning Kamp
8e5d2c7eca Fix systematic off-by-one errors in unit number range checks.
Found by:       FlexeLint
2003-05-31 16:57:01 +00:00
Hiten Pandya
b77c32a07e Rename BUS_DMAMEM_NOSYNC to BUS_DMA_COHERENT.
The current name is confusing, because it indicates to
the client that a bus_dmamap_sync() operation is not
necessary when the flag is specified, which is wrong.

The main purpose of this flag is to hint the underlying
architecture that DMA memory should be mapped in a coherent
way, but the architecture can ignore it.  But if the
architecture does supports coherent mapping of memory, then
it makes bus_dmamap_sync() calls cheap.

This flag is the same as the one in NetBSD's Bus DMA.

Reviewed by: gibbs, scottl, des (implicitly)
Approved by: re@ (jhb)
2003-05-30 20:40:33 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Poul-Henning Kamp
6df6552a3d Be consistent about marking functions static.
Found by:	FlexeLint.
2002-10-15 20:32:45 +00:00
Poul-Henning Kamp
85fee3197a It's bad enough people can't figure out to use the same code, or in
this case, ugly macros, but the data tables can be reused:

Put one copy of the software HDLC tables in its own file.
2002-09-11 12:44:58 +00:00
Poul-Henning Kamp
695aa14fe2 Add missing calls to mtx_init().
It seems counter-intuitive that all drivers have to do this.

Pointed in right direction by:	gj
2002-09-10 16:41:08 +00:00
Brooks Davis
5906e69ac2 Continue de-counting i4b. Devices i4bctl, i4bcapi, iavc, i4bq921,
i4bq931, i4b, isic, iwic, ifpi, ifpi2, ifpnp, ihfc, and itjc are
no longer count devices.  Also remove a few other instances of N<DEVICE>
being used to control compilation of whole files.

Reviewed by:    hm
2002-09-02 00:52:11 +00:00
Brooks Davis
22afbb6bb0 Remote pci.h/NPCI usage from i4b code.
Approved by:	hm
2002-06-13 06:04:28 +00:00
Jens Schweikhardt
21dc7d4f57 Fix typo in the BSD copyright: s/withough/without/
Spotted and suggested by:	des
MFC after:	3 weeks
2002-06-02 20:05:59 +00:00
Peter Wemm
fe8ae4dd13 Fix some low hanging fruit warnings. There are problems in i4b_ing.c
still, but they are due due to some bogosity in netgraph.
2002-05-24 05:46:50 +00:00
Gary Jennejohn
c0a06166a0 Fix a problem which could cause some machines to hang after a warm boot.
This should be in 4.6.

Submitted by:	Ari Suutari <ari.suutari@syncrontech.com>
2002-05-10 12:04:04 +00:00
Gary Jennejohn
3573a23fa1 Change instances of avma1pp2- to ifpi2- in printf's since the name
of the driver should be emitted.

This was already changed in the code committed to RELENG_4.
2002-04-28 11:47:10 +00:00
Gary Jennejohn
bb83e7583e On slow machines interrupts could be lost, so check for pending
interrupts in a loop.

Tested by: Andrew Gordon <arg-bsd@arg1.demon.co.uk>
2002-04-23 10:25:35 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Hellmuth Michaelis
e0d83003c4 Clean up the i4b kernel part: remove unmaintained #if(def)s for NetBSD,
OpenBSD and BSD/OS and respective code, remove pre $FreeBSD CVS id's,
remove #if(def)s and respective code for FreeBSD versions < 5 .
2002-03-17 09:33:15 +00:00
Peter Wemm
183439a14a Quiet bogus gcc warning 2002-02-28 03:15:53 +00:00
Gary Jennejohn
588974c99a Fix some places where the macro L0IFPIUNIT was used instead of the correct
form L0IFPI2UNIT. This could result in a panic if the user tried to
trace using isdntrace(8). I fixed this locally but forgot to commit it.

Reminded by:	"Wittig, Christoph" <wc@medianet-world.de>
2002-01-02 12:55:04 +00:00
Joerg Wunsch
230ce3668b Fix two typos in previous commit. 2001-12-30 19:37:41 +00:00
Gary Jennejohn
1c6126426b Protect mtx_init() invocations with mtx_intialized() checks to avoid a
reported panic.

Submitted by:	Alexander Leidinger <Alexander@Leidinger.net> (partly)
MFC after:	4 weeks
2001-12-30 09:27:28 +00:00
Gary Jennejohn
01ecab4055 Fix an error which could cause a panic if both an ifpi and ifpi2 controller
were installed.

For the ifpi2, change the string in the driver_t from "ifpi2" to
"ifpi2-" so that one sees "ifpi2-0" instead of "ifpi20" at boot time.
2001-12-29 17:19:25 +00:00
Gary Jennejohn
c3e8386594 Add a driver for the AVM Fritz!Card PCI version 2 ISDN controller.
MFC after:	4 weeks
2001-12-22 09:22:02 +00:00
Hellmuth Michaelis
8ae67d78bf Fix bug attaching the ELSA PCC16, the cardtyp value was set incorrectly
in the probe routine.
MFC after:	3 days
2001-10-21 09:22:48 +00:00
Hellmuth Michaelis
676ccc0cd0 Add a driver for the Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP
card.

Submitted by:   Steve Looman
Reviewed by:    hm
MFC after:      1 month
2001-10-21 09:20:52 +00:00
Jeroen Ruigrok van der Werven
1a6e52d0e9 Fix typo: seperate -> separate.
Seperate does not exist in the english language.
2001-02-06 11:21:58 +00:00
Hellmuth Michaelis
d04d012625 Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
Thanks a lot to Jakob Schripsema (sch@kpn.com) for pointing out similarities
of the Eicon 2.02 to the Siemens I-surf driver !
2001-01-26 13:16:11 +00:00
Hellmuth Michaelis
b5dd89c336 remove redundant definitions of card types:
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
 - remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
2001-01-24 08:41:52 +00:00
Hellmuth Michaelis
92ced03849 Update the iwic driver: fix error handling for rx errors on the D-channel
which prevents erroneous packets from being put onto the protocol stack;
enhance error detection for B-channel HDLC errors; remove old cvs id´s.
2001-01-21 10:12:50 +00:00
Hellmuth Michaelis
23f507c5d1 Reenable support for FreeBSD 4.x and possibly the other supported BSD's 2001-01-15 14:54:43 +00:00
Hellmuth Michaelis
2fbe70cb49 Add the ISDN itjc hardware driver. This driver supports the NETJet-S cards
from Traverse Technology and also the Teles PCI-TJ cards both based on the
chipset combination of the Siemens ISAC and the TJNet Tiger300/320 chips.

The itjc/i4b_hdlc.h file will hopefully soon be merged with the file
/usr/src/sys/i4b/layer1/i4b_hdlc.h.

Submitted by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-11 14:35:45 +00:00
Hellmuth Michaelis
2fd9d69993 Update the ihfc driver with a patch from the author. He writes: This patch
enables the driver to work on current (I have not tested the isa part fully,
but I suppose it should work). The patching from jlemon caused a crash at
probe time. This is probably my fault not having added a comment for
"RESET_SOFT" saying: "this resets all!".

Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2001-01-11 13:38:38 +00:00
Hellmuth Michaelis
0dac6ca13f Add PCI id's for the Planet PCI ISDN Adapter (Model IA128P-STDV)
Submitted by:	Luiz Henrique Duma <duma@bsi.com.br>
2001-01-10 13:34:23 +00:00
Jonathan Lemon
13403f7fd8 Move the mutex initialization from avma1pp_bchannel_setup into
avma1pp_attach_avma1pp, since the former may be called multiple
times and we only want to initialize the mutex once.

Submitted by: Thomas Moestl <tmoestl@gmx.net>
2001-01-09 15:01:42 +00:00
Hellmuth Michaelis
1fa9b0422d Bugfix: enable interrupt sharing for ELSA Microlink ISDN PCI 2000-12-03 16:20:33 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Jeroen Ruigrok van der Werven
b95c229b4d Fix two typo's: teh -> the, ther -> there. 2000-11-08 12:08:53 +00:00
Hellmuth Michaelis
86bc05b331 Remove unused #include statements
Submitted by:	phk
2000-10-30 14:49:26 +00:00
Hellmuth Michaelis
f33f907ea4 Add infrastructure for Cologne Chip HFC-S PCI driver. 2000-10-26 07:00:05 +00:00
Hellmuth Michaelis
065a09a83c Make the software HDLC decoder work again.
Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2000-10-26 06:31:18 +00:00
Hellmuth Michaelis
1c2715d95d Submitted by: Hans Petter Selasky <hselasky@c2i.net>
Remove double 0x7e flags between hdlc-frames.
2000-10-20 11:20:58 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Hellmuth Michaelis
5d113d0ac0 Submitted by: phk
Remove not needed includes.
2000-10-13 14:10:51 +00:00
Hellmuth Michaelis
767469d9b2 update to i4b version 0.95.04 (oops, forgot this one ..) 2000-10-09 14:30:50 +00:00
Hellmuth Michaelis
440c876352 update to i4b version 0.95.04 2000-10-09 13:29:00 +00:00
John Baldwin
9a94c9c5c3 - Remove the inthand2_t type and use the equivalent driver_intr_t type from
newbus for referencing device interrupt handlers.
- Move the 'struct intrec' type which describes interrupt sources into
  sys/interrupt.h instead of making it just be a x86 structure.
- Don't create 'ithd' and 'intrec' typedefs, instead, just use 'struct ithd'
  and 'struct intrec'
- Move the code to translate new-bus interrupt flags into an interrupt thread
  priority out of the x86 nexus code and into a MI ithread_priority()
  function in sys/kern/kern_intr.c.
- Remove now-uneeded x86-specific headers from sys/dev/ata/ata-all.c and
  sys/pci/pci_compat.c.
2000-09-13 18:33:25 +00:00
Peter Wemm
55b161a4d3 Make this compile without the old 2.2 compatability defines. 2000-05-28 16:24:17 +00:00
Poul-Henning Kamp
e9340d96fa Remove 42 unneeded #include <sys/ioccom.h>.
ioccom.h defines only implementation detail, and should therefore
only be included from the #include which defines the ioctl tags,
in other words: never include it from *.c
2000-05-03 07:31:38 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Hellmuth Michaelis
17df19190a Fix a problem which caused i/o resource allocation conflict of this
particular ISDN card with the 2nd IDE controller and/or other cards
depending on configuration.

The amount of i/o ports allocated are reduced from 0x40 per range to
0x20 per range.

Submitted by:	Andrew Gordon <arg@arg1.demon.co.uk>
Approved by:	jkh
2000-03-09 20:57:47 +00:00