Commit Graph

61 Commits

Author SHA1 Message Date
Nathan Whitehorn
123055f01f Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks
2013-10-30 14:04:47 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Alexander Motin
e5dfa058da MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning.  NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph".  If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
2013-04-14 09:55:48 +00:00
Konstantin Belousov
c46262f810 Fix twa(4) after the r246713. The driver copies data around to
satisfy some alignment restrictions.  Do not set TW_OSLI_REQ_FLAGS_CCB
flag for mapped data, pass the csio->data_ptr in the req->data.

Do not put the ccb pointer into req->data ever, ccb is stored in
req->orig_req already.

Submitted by:	Shuichi KITAGUCHI <ki@hh.iij4u.or.jp>
PR:	kern/177020
2013-03-21 13:06:28 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Roman Divacky
28f48eee07 Give tw_osl_dbg_printf format string to pacify clang warning. 2012-11-09 15:29:52 +00:00
Alexander Motin
15a0920e21 Return CAM_SEL_TIMEOUT and CAM_DEV_NOT_THERE instead of CAM_TID_INVALID
and CAM_LUN_INVALID for case of missing devices. In removes tons of error
messages from CAM during bus scans.

Reported and tested by:	Mike Tancsa <mike@sentex.net>
MFC after:	3 days
2012-06-22 21:46:41 +00:00
John Baldwin
30dee685ae Use bus_get_dma_tag() to inherit the 4G boundary restriction from the
parent PCI bus and remove the home-grown version in this driver.
2012-03-07 18:53:56 +00:00
Kevin Lo
1a7e07818d s/timout/timeout 2011-12-15 06:29:13 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Bjoern A. Zeeb
3887319477 Fix a compile problem introduced with r212008 on 32bit:
Both deadline and current_time are time_seconds (+ utc_offset())
casted to unsigned long long. No need to cast to or print as pointers.

MFC after:	4 days
2010-09-04 16:27:14 +00:00
Xin LI
08390ba4c9 Drain watchdog callouts before detaching. This prevents a panic while
unloading the kernel module.

Submitted by:	Tom Cough
2010-08-30 21:33:33 +00:00
Xin LI
a806ad4021 Vendor update to version 3.80.06.003 to fix a panic with ZFS when under
heavy I/O load.

Many thanks to LSI for continuing to support FreeBSD.

PR:		kern/149968
Submitted by:	LSI (Tom Couch)
Reported by:	Kai Kockro <kkockro web de>
Tested by:	Kai Kockro, jpaetzel
MFC after:	7 days
2010-08-30 19:15:04 +00:00
Xin LI
c8ed14e2d8 Don't use pack() for structures that is used purely for software state.
Otherwise the resulting, unaligned mutex structure would trigger panic.

Submitted by:		Tom Cough <tom.couch lsi.com>
Reported/Tested by:	jhb
MFC after:		3 days
2010-07-09 17:38:15 +00:00
Xin LI
b7a4702bd1 Remove an unused comment. 2010-06-17 19:48:03 +00:00
Xin LI
ddaa454e6a Apply driver update from LSI. Many thanks to LSI for continuing to
support FreeBSD.

  1) Timeout ioctl command timeouts.
       Do not reset the controller if ioctl command completed
       successfully.
  2) Remove G66_WORKAROUND code (this bug never shipped).
  3) Remove unnecessary interrupt lock (intr_lock).
  4) Timeout firmware handshake for PChip reset (don't wait forever).
  5) Handle interrupts inline.
  6) Unmask command interrupt ONLY when adding a command to the pending
     queue.
  7) Mask command interrupt ONLY after removing the last command from
     the pending queue.
  8) Remove TW_OSLI_DEFERRED_INTR_USED code.
  9) Replace controller "state" with separate data fields to avoid races:

       TW_CLI_CTLR_STATE_ACTIVE                     ctlr->active
       TW_CLI_CTLR_STATE_INTR_ENABLED               ctlr->interrupts_enabled
       TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY          ctlr->internal_req_busy
       TW_CLI_CTLR_STATE_GET_MORE_AENS              ctlr->get_more_aens
       TW_CLI_CTLR_STATE_RESET_IN_PROGRESS          ctlr->reset_in_progress
       TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS   ctlr->reset_phase1_in_progress

 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT
     null.
 11) Replace softc "state" with separate data fields to avoid races:
       TW_OSLI_CTLR_STATE_OPEN                      sc->open
       TW_OSLI_CTLR_STATE_SIMQ_FROZEN               sc->simq_frozen
 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in
     tw_osl_complete_passthru()
 13) Use correct CAM status values.
       Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID.
       Remove use of CAM_RELEASE_SIMQ for physical data addresses.
 14) Do not freeze/ release the simq with non I/O commands.
       When it is appropriate to temporarily freeze the simq with an I/O
       command use:
         xpt_freeze_simq(sim, 1);
         ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
       otherwise use:
         xpt_freeze_simq(sim, 1);
         xpt_release_simq(sim, 1);

Submitted by:	Tom Couch <tom.couch lsi.com>
PR:		kern/147695
MFC after:	3 days
2010-06-09 21:40:38 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Roman Divacky
fd3c9374ff Change the command argument to ioctl routines to u_long to avoid
truncating the command to 32bit on 64bit archs where int is 32bit
(ie. amd64).

Approved by:	scottl
Approved by:	ed (mentor, implicit)
2009-09-22 16:28:07 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Ed Schouten
0de5b9b0f0 Use si_drv1 instead of dev2unit() in twe(4) and twa(4)
Reviewed by:	scottl
2009-04-14 14:02:43 +00:00
John Baldwin
f7c701d528 Reenable 64-bit DMA for twa(4) controllers, but use a boundary of 4GB to
prevent individual transactions from crossing a 4GB address boundary.  Due
to bus_size_t type limitations, the driver uses a 2GB boundary in PAE
kernels.

Reviewed by:	scottl
MFC after:	1 week
2009-03-23 19:27:23 +00:00
Xin LI
c94526e26d Limit DMA memory to lower addressable 4GB, without this patch, we
can reliably provoke data corruption on systems equipped with a
plenty of memory during high load.

Reported by:	gnn via iXsystems
MFC candidate:	RELENG_7_1, RELENG_7
2008-10-06 22:34:17 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Scott Long
1b4a3403cd Deferred interrupts don't work yet, disable them.
Submitted by: Manjunath Ranganathaiah
2007-10-12 16:51:22 +00:00
Scott Long
a4820cd2f6 Update to version 3.70.03.007 from the vendor. This adds support for new
SAS-enabled cards.  It also makes the driver MPSAFE, eliminating some
problems that resulted from CAM becoming MPSAFE.  Many thanks to 3Ware/AMCC
for continuing to support FreeBSD.

Submitted by: Manjunath Ranganathaiah
Approved by: re
2007-10-09 17:43:57 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Scott Long
40ca137bbd Minor update to version 3.70.03.007 2007-05-19 10:12:58 +00:00
Scott Long
4d190d01ab The version string scheme embeds the freebsd major release version,
something that I wasn't aware of with the last import.  Adjust the
string accordingly for 7-CURRENT.
2007-05-10 15:36:58 +00:00
Scott Long
4511a5c893 Import version 3.60.03.006 of the TWA driver:
This patch does the following:

- Remove un-necessary code that is not even compiling into the driver
 under TW_OSL_NON_DMA_MEM_ALLOC_PER_REQUEST defines.
- Remove bundled firmware image and associated "files" entry for tw_cl_fwimg.c
- Remove bundled firmware flashing routines. We now have tw_update userspace
 FreeBSD controller flash utility.
- Fix driver crash on load due to shared interrupt.
- Fix 2 lock leaks for Giant lock.
- Fix CCB leak.
- Add support for 9650SE controllers.

Many thanks to 3Ware/AMCC for continuing to support FreeBSD.
2007-05-09 04:16:32 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Matt Jacob
bfa5ec2a88 Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.
PR:		106543
Reviewed by:	Adam Radford
MFC after:	3 days
2006-12-11 23:59:42 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Matt Jacob
fa9ed86506 The first of 3 major steps to move the CAM layer forward to using
the CAM_NEW_TRAN_CODE that has been in the tree for some years now.

This first step consists solely of adding to or correcting
CAM_NEW_TRAN_CODE pieces in the kernel source tree such
that a both a GENERIC (at least on i386) and a LINT build
with CAM_NEW_TRAN_CODE as an option will compile correctly
and run (at least with some the h/w I have).

After a short settle time, the other pieces (making
CAM_NEW_TRAN_CODE the default and updating libcam
and camcontrol) will be brought in.

This will be an incompatible change in that the size of structures
related to XPT_PATH_INQ and XPT_{GET,SET}_TRAN_SETTINGS change
in both size and content. However, basic system operation and
basic system utilities work well enough with this change.

Reviewed by:	freebsd-scsi and specific stakeholders
2006-10-31 05:53:29 +00:00
Poul-Henning Kamp
e5037a18a9 Use utc_offset() where applicable, and hide the internals of it
as static variables.
2006-10-02 18:23:37 +00:00
Poul-Henning Kamp
f645b0b51c First part of a little cleanup in the calendar/timezone/RTC handling.
Move relevant variables to <sys/clock.h> and fix #includes as necessary.

Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
Scott Long
bdba4eb2d7 Remove header pollution. 2006-04-30 16:46:11 +00:00
Vinod Kashyap
ff1625c61d twa corresponding to the 9.3.0.1 release on the 3ware website. This driver has
support for the 9xxxSX controllers, along with the earlier 9xxxS series
controllers.
2005-11-08 22:51:43 +00:00
Robert Watson
5bb84bc84b Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in
  memory monitoring tools such as vmstat.

- Remove punctuation that is incompatible with using memory type names
  as file names, such as '/' characters.

- Disambiguate some collisions by adding subsystem prefixes to some
  memory types.

- Generally prefer lower case to upper case.

- If the same type is defined in multiple architecture directories,
  attempt to use the same name in additional cases.

Not all instances were caught in this change, so more work is required to
finish this conversion.  Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
David E. O'Brien
ede2033b1f Don't pollute the entire kernel build with -I$S/dev/twa. 2005-09-11 00:52:05 +00:00
Vinod Kashyap
faefda0be0 Acquire Giant before making some CAM calls that need Giant to be held. 2005-06-11 00:14:23 +00:00
Vinod Kashyap
b598979dc9 Make call to tw_cl_deferred_interrupt in twa_poll, not dependent on the
return value from tw_cl_interrupt.
2005-04-29 20:03:20 +00:00
Vinod Kashyap
f0c1dee27f The latest release of the FreeBSD driver (twa) for
3ware's 9xxx series controllers.  This corresponds to
the 9.2 release (for FreeBSD 5.2.1) on the 3ware website.

Highlights of this release are:

1. The driver has been re-architected to use a "Common Layer"
    (all tw_cl* files), which is a consolidation of all OS-independent
    parts of the driver.  The FreeBSD OS specific portions of the
    driver go into an "OS Layer" (all tw_osl* files).
    This re-architecture is to achieve better maintainability, consistency
    of behavior across OS's, and better portability to new OS's (drivers
    for new OS's can be written by just adding an OS Layer that's specific
    to the OS, by complying to a "Common Layer Programming Interface" API.

2. The driver takes advantage of multiple processors.

3. The driver has a new firmware image bundled, the new features of which
   include Online Capacity Expansion and multi-lun support, among others.
   More details about 3ware's 9.2 release can be found here:
   http://www.3ware.com/download/Escalade9000Series/9.2/9.2_Release_Notes_Web.pdf

Since the Common Layer is used across OS's, the FreeBSD specific include
path for header files (/sys/dev/twa) is not part of the #include pre-processor
directive in any of the source files.  For being able to integrate twa into
the kernel despite this, Makefile.<arch> has been changed to add the include
path to CFLAGS.

Reviewed by: scottl
2005-04-12 22:07:11 +00:00
Sam Leffler
4a8bef25fe check copyin+copyout return values when processing TWA_IOCTL_GET_LOCK
Noticed by:	Coverity Prevent analysis tool
2005-03-27 00:29:37 +00:00
Poul-Henning Kamp
bde1a9c98b Kill MAJOR_AUTO 2005-03-17 13:37:28 +00:00
Scott Long
70e83c0d6e Use the correct flags for bus_dma_tag_create(). 2005-03-06 20:56:16 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Vinod Kashyap
fc01f80ec3 Bumped up the driver version, following recent changes. 2005-02-12 01:16:28 +00:00
Vinod Kashyap
6cc7bd9464 1. Revert back to the way the older driver handled XPT_PATH_INQ. This seems to
fix the problem with device discovery seen by some people.
2. Change to make 3ware CLI/3DM work on amd64.
3. Fix a potential problem that could cause the driver to do strlen(NULL) when
   using older firmware.

Reviewed by:scottl
2005-02-10 18:07:33 +00:00