remote machines. Now they really are handled *exactly* the same as
input filters (if=) for remote queues, except that they are started
with a different set of parameters. This should fix a few subtle
bugs in output-filter processing on such queues. It is a pretty
significant re-arranging of sendfile(), moving some of it to a new
execfilter() routine.
PR: 36552
Reviewed by: no screams from freebsd-audit
MFC after: 12 days
We are long past the stage where we only had ARP working for 10 Mb/s.
PR: 35604
Submitted by: Gary W. Swearingen <swear@blarg.net>
Additional comments by: Mike DeGraw-Bertsch <mbertsch@radioactivedata.org>
This patch explains -F for usershow and groupshow. Because "groupmod
... -F" doesn't do anything, the patch also drops that from groupmod's
command line args.
PR: 35955
Submitted by: Mike DeGraw-Bertsch <mbertsch@radioactivedata.org>
so know we have proper PKG registration and dependency information.
This is a WIP for 5.0 DP #1, so it is still rough around the edges and
does not GC the old XFree86 3.3.6 handling stuff that should be GC'ed.
Sponsored by: FreeBSD Mall, Inc.
$ cat pkg.tgz | pkg_add -
The above command line will fail on -CURRENT or -STABLE, and
therefore, so will sysinstall if you try to install additional
packages through the network (FTP) from a multiuser system. Because
of the different environment during installation (wrt the playpen),
this bug does not manifest itself during initial installs, and users
may install packages from the network just fine at that time.
This bug was fixed in OpenBSD 4 years ago.
----------------------------
revision 1.4
date: 1998/04/07 05:56:13; author: marc; state: Exp; lines: +13 -8
fix package input from standard input -- the program tried to process
stdin twice. Note: it assumes stdin is a compressed tar file.
----------------------------
PR: conf/36606
Obtained from: OpenBSD
MFC after: 2 weeks
from CD-ROM in 4-stable. Note that in 5-current, we use devfs so this
change (hopefully) shouldn't change anything.
I'll MFC to 4-stable later.
Tested with: FreeBSD/i386, 4.5-STABLE-20020330-JPSNAP
so the .lo files can be partially linked against libraries
which redefine symbols in the standard libs, or which reference
symbols in the objects.
Submitted by: Sam Leffler
MFC After: 3 days
discipline to do the async escaping, but no other benefits are available yet.
Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.
Make the Makefile a little more sane WRT RELEASE_CRUNCH.
This is needed on sparc64 (and maybe all OpenFirmware based machines) as
most [all?] OpenBoot PROM's require either an a.out or FCode boot image.
Submitted by: jake
/kernel. kgmon actually appears to use getbootfile(), and the man page
might need to be updated to reflect that.
Reported by: Hiten Pandya <hiten@uk.FreeBSD.org>
rpcgen can't really make those fields const because the remote side might
want to munge them, so we need to pass non-const in. Hackish, but should
work.
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
"register" -- just how many free registers do people think machines have?)
While I'm here, make the menu entries on the documentation menu begin
with "1" instead of "2".
Reviewed by: imp, rwatson, murray
Approved by: imp, rwatson, murray
MFC after: 1 week
o Use ansi function definitions
o MAXPATHLEN already has the NUL at the end, so no need to add 1 (note that
MAXNAMLEN doesn't, so the + 1 there is correct).
o remove register.
the patch Matthew submitted, but I broke the lines in a more FreeBSD
way and made one small wording change.
PR: 31265
Submitted by: Matthew D. Fuller <fullermd@over-yonder.net>
MFC after: 3 weeks
case use size of the currently displaying font as a suffix. For example,
when the when the size of the currently displayed font is 8x8 the
following command will load koi8-r-8x8.fnt.
# vidcontrol -f koi8-r
MFC after: 2 weeks
installed ones under /boot (which we may not even have in the
case of a cross build).
This introduced chicken and egg problem - we need boot images
early in the "depend" stage but they have not yet been built.
Work around this by excluding the generated makeboot.c source
from the "depend" list; it's okay because we hardcode all its
dependencies explicitly. We actually lose the dependency bit
on <sys/types.h> but it's probably okay too as the only thing
we use is the u_char datatype and this is unlikely to change.
After all, it's normal for sloppy cleaning to cause problems.
beast.FreeBSD.org running 5.0-CURRENT alpha has been able to
cross build i386 world with this patch.
Prodded by: gallatin
spares (the size of the field was changed from u_short to u_int to
reflect what it really ends up being). Accordingly, change users of
xucred to set and check this field as appropriate. In the kernel,
this is being done inside the new cru2x() routine which takes a
`struct ucred' and fills out a `struct xucred' according to the
former. This also has the pleasant sideaffect of removing some
duplicate code.
Reviewed by: rwatson
master.passwd, group, and make.conf
* Add a feature to check variables in rc.conf[.local] to their
counterparts in /etc/defaults/rc.conf after a run
* Twiddle whitespace a little
* Change some "[ -f file ] && rm file" to "rm -f file"
counter type, as threatened in rev.1.8 (the density doesn't need to
be recorded since it can be derived from other fields). This doesn't
affect binary compatibility, but new utilities won't be able to depend
on the contents of this field because libc/gmon/gmon.c was broken --
it wrote garbage to the spare fields.
Added a history counter type field to struct gmonparam. This breaks
binary compatibility a little, since kgmon wanted to read the whole
struct. Fixed kgmon to only depend on reading the critical earlier
parts of the struct. This should also fix 6+ year old breakage of
binary compatibility when the profrate field was added.
Only initialize the new field in struct gmon for now, so that the
compatibility code for this (in kgmon) gets tested. The compatibility
code has to guesstimate the value. The new field in struct gmonparam
is for the kernel to initialize so that kgmon doesn't have to guess.
It doesn't actually do it yet though. This adds a flag to config so
that we can exclude certain vendor files from this even when the rest
of the kernel has it on. make -DNO_WERROR would also bypass all of it.
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
* Fix a problem with files that have no CVS $Id's. Thanks to naddy for
spotting this one. It wasn't a _huge_ problem since almost all the files
we install (except motd) have one, but still, it's a bug.
* Add a divider between diff outputs, which is helpful both for logs,
and for giving a good visual clue for diffs that are smaller than
$LINES. Another helpful suggestion from Gary W. Swearingen, swear@blarg.net.
it clear that the recent PCI cards do not require firmware to be loaded,
unlike the completely different ISA cards that are branded with the same name.
buffers before reading the memory. Arguably, the failure modes here
are poor, but we can now read >2k EAs. Also, update the copyrights
and licenses while I'm here.
Note that getextattr has not yet been updated to dynamically allocate
a read buffer, although that can now be done.
Obtained from: TrustedBSD Project
Sponsored by: NAI Labs
all facilities that previously relied on /proc have been rewritten
to use ptrace(). procfs has presented a substantial security
hazard for years, with several user->root compromises in the last
few years. Procfs will continue to be available but will require
administrator intervention to use.
Reviewed by: scottl, jedgar, mike, tmm
