Commit Graph

266 Commits

Author SHA1 Message Date
Alexander Motin
c8039fc667 MFp4:
- Extend XPT-SIM transfer settings control API. Now it allows to report to
SATA SIM number of tags supported by each device, implement ATA mode and
SATA revision negotiation for both SATA and PATA SIMs.
- Make ahci(4) and siis(4) to use submitted maximum tag number, when
scheduling requests. It allows to support NCQ on devices with lower tags
count then controller supports.
- Make PMP driver to report attached devices connection speeds.
- Implement ATA mode negotiation between user settings, device and
controller capabilities.
2009-11-24 12:47:58 +00:00
Alexander Motin
88cbe43d65 Fix variable type. 2009-11-09 19:47:46 +00:00
Alexander Motin
50c9a27603 Add support for ATA Power Management. 2009-11-09 11:39:51 +00:00
Alexander Motin
c1bd46c2d3 MFp4:
- Add support for sector size > 512 bytes and physical sector of several
logical sectors, introduced by ATA-7 specification.
- Remove some obsoleted code.
2009-11-04 15:24:32 +00:00
Alexander Motin
7f8fbd60d4 MFp4:
Sync connection speed reporting with kernel.
Report speed in identify command, same as done by inquiry.
2009-10-31 10:47:47 +00:00
Ruslan Ermilov
106d839190 Switch the default WARNS level for sbin/ to 6.
Submitted by:	Ulrich Spörlein
2009-10-19 16:00:24 +00:00
Alexander Motin
7365f12882 Fethch more information from IDENTIFY result. 2009-09-27 22:00:26 +00:00
Alexander Motin
a3f00c8abf MFp4:
Reduce code duplication.
2009-09-22 22:17:14 +00:00
Alexander Motin
80976615e3 Add to camcontrol cmd support for sending arbitrary ATA commands.
It could be used for broad range of tasks, such as configuring drive
power management modes, caching, security and any other features and tasks,
not supported by existing drivers.
2009-09-04 18:21:40 +00:00
Alexander Motin
7606b4450b Short ATA command format has 28bit address, not 36bit.
Rename ata_36bit_cmd() into ata_28bit_cmd(), while it didn't become legacy.

MFC after:	2 days
2009-08-30 16:31:25 +00:00
Alexander Motin
36cf18d4f9 MFp4:
- Tune protocol version reporting,
 - Add supported DMA/PIO modes reporting.
 - Fix IDENTIFY for ATAPI devices.
 - Remove confusing "-" for NCQ status.
2009-08-30 16:08:25 +00:00
Scott Long
e69811df21 Fix alignment issue with ATA IDENTIFY structure.
Approved by:	re
2009-07-10 17:42:53 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Kenneth D. Merry
f553b7b391 Add SCSI READ CAPACITY support to camcontrol. The new 'readcap' subcommand
will automatically issue the 16 byte verison of read capacity if the device
in question is larger than 2TB.

There are also a number of output options here (last block, number of
blocks, human readable) that should meet most needs, and also aid in
scripting.

Approved by:	re (bmah)
MFC after:	1 week
2007-09-08 20:24:12 +00:00
Wilko Bulte
7a429ad443 typo: s/tranport layer/transport layer/
MFC after: 1 week
2007-01-28 21:34:07 +00:00
Matt Jacob
3623222e67 It's confusing to say that "Command Queueing Supported" just based
upon the scsi flag validity field. Instead, just say "Command Queueing Enabled"
when it is- otherwise remain mute.
2006-12-03 07:11:55 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Ruslan Ermilov
8266d47670 Markup fixes. 2006-09-18 11:55:10 +00:00
Kenneth D. Merry
42cb6a80b6 Implement 'camcontrol reportluns'. This allows users to send the SCSI
REPORT LUNS command to a device.

camcontrol.[c8]:	Implement reportluns.  This tries to print the LUNs
			out in a reasonable format.  Only the periph
			addressing method has been tested, since very little
			hardware that I know of supports the other methods.

scsi_all.[ch]:		Revamp the report luns CDB structure and helper
			functions.  This constitutes a little bit of an API
			change, but since the old CDB length was 10 bytes,
			and the REPORT LUNS CDB length is actually 12 bytes,
			it's clear that no one was using this API in the
			first place.

MFC After:	1 week
2006-08-21 13:24:50 +00:00
Ruslan Ermilov
55c82bf0d4 Markup fixes.
Approved by:	re (blanket)
2005-06-14 11:24:56 +00:00
Kenneth D. Merry
e9e4d3e4d4 Add "report only" functionality to 'camcontrol format', so users can get a
report on the status of a format already running on a drive.

Fix status reporting for 'camcontrol format'.  This was broken in rev 1.34
of camcontrol.c, almost 4 years ago!

Submitted by:	joerg (most of the reportonly changes)
MFC after:	3 days
2005-03-26 05:34:54 +00:00
Ruslan Ermilov
0227791b40 Expand *n't contractions. 2005-02-13 22:25:33 +00:00
Ruslan Ermilov
bac7835b60 Deal with double whitespace. 2004-07-03 00:13:43 +00:00
Ruslan Ermilov
9806e23132 Mechanically kill hard sentence breaks. 2004-07-02 21:45:06 +00:00
Olivier Houchard
c1b2de5af0 Use WARNS?=3 for these in the arm case for now, due to toolchain issues. 2004-05-14 13:31:21 +00:00
Kenneth D. Merry
2a413b2918 Fix a couple of camcontrol issues that popped up on sparc64:
- bzero the CCB header in getdevtree() and set the path properly, to
   avoid having random garbage in the CCB header.
 - if the lun isn't specified in a device specifier, it should default to
   0, not whatever random data happens to be in the lun variable.
 - move the prototype for getdevtree() out from under #ifndef MINIMALISTIC,
   since it is used in both cases.

Submitted by:	Marius Strobl <marius@alchemy.franken.de> (mostly)
MFC After:	2 weeks
2004-03-03 01:51:24 +00:00
Peter Grehan
5cfe0423e6 Userland signed char fixes for PPC build. Problems were using a char
return for getopt() and comparing to -1, ditto with fgetc() and EOF,
and using the kg_nice value from <sys/user.h>

Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Reviewed by: obrien, bde (a while back)
Tested lightly on: ppc, i386, make universe
2004-01-22 07:23:36 +00:00
Warner Losh
3c33210ce8 Fix alignment of the trailing \ 2003-08-22 01:56:17 +00:00
Johan Karlsson
398676131f Make this WARNS=6 clean by:
1: add 'const' to char * where needed;
 2: mark unused variables with __unused;
 3: remove double prototypes for mode_edit and mode_list.
 4: moves the global variables 'bus', 'target', and 'lun' into
        the main function and protect them with #ifndef MINIMALISTIC,
 5: renames 3 variable in order not to shadow other things
        index -> indx -- in modepage_dump since index is a function
		from <strings.h.>
        arglist -> arglst -- in the function parse_btl since arglist
                is also a global variable
        convertend -> convertend2 -- in the function editentry_set
                since that name is used two times within the function.
 6: cast 0xffffffff in the macro RESOLUTION_MAX(size) to (int)
        since it is unsigned otherwise.

Tested by:	make universe
Approved by:	ken
2003-08-05 09:19:07 +00:00
Kenneth D. Merry
50a7fdaed8 Remove MAINTAINER= lines in the makefiles for camcontrol, iostat, libcam
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.

Also, remove duplicate entries in src/MAINTAINERS for those utilities.  I
already had entries for them.
2003-06-14 05:28:01 +00:00
David E. O'Brien
8e7d2436a1 Set WARNS=1. RESOLUTION_MAX macro has major signed/unsigned issues. 2003-05-02 06:56:32 +00:00
David E. O'Brien
bf2783a016 Use __FBSDID. 2003-05-02 06:49:10 +00:00
Ruslan Ermilov
024ae00499 Fixed (soon might be fatal) -Wformat warnings. 2003-03-15 07:56:59 +00:00
Johan Karlsson
c7cf7aa684 Make camcontrol WARNS=2 clean.
Approved by:	ken
2003-02-20 21:07:59 +00:00
Nate Lawson
a7e5261e30 Add PERIPH and XPT debug options to camcontrol. This makes all CAM debug
options tunable from userland.

Approved by:	ken
MFC after:	3 days
2002-12-17 06:05:21 +00:00
Matthew N. Dodd
d4e731a642 Split cam_argmask and move "commands" into cam_cmdmask. This addresses
the issue of not having any free bits left for additional commands.

Approved by:	 ken
MFC after:	 4 weeks
2002-09-08 05:39:36 +00:00
Matthew N. Dodd
f9cecca2d4 Add 'camcontrol load' as a complement to 'camcontrol eject'.
Approved by:	 ken
MFC after:	 4 weeks
2002-09-06 18:16:26 +00:00
Johan Karlsson
72abe188fb Take care of WARNS=3 warnings by using unsigned/signed variable
as needed.

Approved by:	ken, sheldonh (mentor)
2002-08-20 20:54:03 +00:00
Johan Karlsson
0319a6a43b Remove unused variable. camcontrol is now WARNS=2 clean on i386.
Approved by: 	ken, sheldonh (mentor)
2002-08-18 21:46:32 +00:00
Philippe Charnier
e1205e80e5 The .Nm utility 2002-07-06 19:34:18 +00:00
Garrett Wollman
b055b157dc Fix syntax errors (labels with no statement). 2002-05-30 21:38:58 +00:00
Kenneth D. Merry
515f06ebc0 Fix a bzero length calculation. sizeof(struct ccb_getdev) should have been
sizeof(struct ccb_getdevstats).

MFC after:	3 days
2002-04-01 03:58:51 +00:00
David E. O'Brien
3d438ad61f Remove 'register' keyword.
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
 "register" -- just how many free registers do people think machines have?)
2002-03-20 17:55:10 +00:00
Maxim Konovalov
e9ef556dd8 Correct an out of date device node name. We do not have /dev/rsd0.ctl
nowadays.

Spotted by:	Sergey Osokin <osa@freebsd.org.ru>
Reviewed by:	ken, ru
Approved by:	ken, ru
MFC after:	1 week
2002-02-11 14:35:28 +00:00
Ruslan Ermilov
485318d4d8 Style.
Approved by:	ken
2002-01-24 16:53:08 +00:00
Joerg Wunsch
7f3aade047 By popular demand, also include the "devlist" subcommand into the set
of commands available in the boot floppy environment.

MFC after:	1 week
2002-01-18 22:42:51 +00:00
Joerg Wunsch
075828a91a Well, RELEASE_BUILD_FIXIT has now been renamed into RELEASE_CRUNCH.
At least, the old version is still good for the MFC though (where
everything is still going the old way). ;-)
2002-01-18 22:17:35 +00:00
Kenneth D. Merry
5710d224b6 Add 'camcontrol rescan all' and 'camcontrol reset all' functionality to
camcontrol.

This enables rescanning all busses or resetting all busses in a system.
The current implementation is not the ideal way to do it -- the ideal way
to do it would be for the transport layer to handle wildcarded busses on
bus rescan and reset operations.  The current implementation enumerates all
the busses and sends a rescan or reset CCB individually.  Handling this
behavior in the transport layer will happen later.

Reviewed by:	imp
Tested by:	joerg
MFC after:	1 week
2002-01-18 18:00:00 +00:00
Joerg Wunsch
6437601ca1 Provide an option to make camcontrol `minimalistic': if the (env/make)
variable RELEASE_BUILD_FIXIT is defined, a camcontrol binary will be
built that only knows the "rescan" and "reset" subcommands.  The
resulting code is small enough to still fit onto the boot floppy.

Reviewed by:	ken
MFC after:	1 week
2002-01-17 20:26:14 +00:00
Kenneth D. Merry
8a8e67f308 Fix breakage in 'camcontrol defects' introduced in rev 1.34 (the new error
recovery code) back in March, 2001.

In effect, this brain-o would cause 'camcontrol defects' to always return
an error.

Pointed out by:	joerg
Tested by:	mdodd
2001-12-05 03:41:40 +00:00
David E. O'Brien
2d68bf45bf Default to WARNS=2.
Binary builds that cannot handle this must explicitly set WARNS=0.

Reviewed by:	mike
2001-12-04 02:19:58 +00:00
Ruslan Ermilov
9916c5d299 mdoc(7) police: replace \*(Ba' with a simple |', it's handled specially. 2001-08-16 11:09:00 +00:00
Ruslan Ermilov
753d686d34 mdoc(7) police: s/BSD/.Bx/ where appropriate. 2001-08-14 10:01:54 +00:00
Ruslan Ermilov
c4d9468ea0 mdoc(7) police:
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
2001-08-07 15:48:51 +00:00
Sheldon Hearn
e1b4d8d074 Use STD{ERR,IN,OUT}_FILENO instead of their numeric values. The
definitions are more readable, and it's possible that they're
more portable to pathalogical platforms.

Submitted by:   David Hill <david@phobia.ms>
2001-07-26 11:02:39 +00:00
Dima Dorfman
7ebcc426ef Remove whitespace at EOL. 2001-07-15 07:53:42 +00:00
Kenneth D. Merry
3393f8daa3 Rewrite of the CAM error recovery code.
Some of the major changes include:

	- The SCSI error handling portion of cam_periph_error() has
	  been broken out into a number of subfunctions to better
	  modularize the code that handles the hierarchy of SCSI errors.
	  As a result, the code is now much easier to read.

	- String handling and error printing has been significantly
	  revamped.  We now use sbufs to do string formatting instead
	  of using printfs (for the kernel) and snprintf/strncat (for
	  userland) as before.

	  There is a new catchall error printing routine,
	  cam_error_print() and its string-based counterpart,
	  cam_error_string() that allow the kernel and userland
	  applications to pass in a CCB and have errors printed out
	  properly, whether or not they're SCSI errors.  Among other
	  things, this helped eliminate a fair amount of duplicate code
	  in camcontrol.

	  We now print out more information than before, including
	  the CAM status and SCSI status and the error recovery action
	  taken to remedy the problem.

	- sbufs are now available in userland, via libsbuf.  This
	  change was necessary since most of the error printing code
	  is shared between libcam and the kernel.

	- A new transfer settings interface is included in this checkin.
	  This code is #ifdef'ed out, and is primarily intended to aid
	  discussion with HBA driver authors on the final form the
	  interface should take.  There is example code in the ahc(4)
	  driver that implements the HBA driver side of the new
	  interface.  The new transfer settings code won't be enabled
	  until we're ready to switch all HBA drivers over to the new
	  interface.

src/Makefile.inc1,
lib/Makefile:		Add libsbuf.  It must be built before libcam,
			since libcam uses sbuf routines.

libcam/Makefile:	libcam now depends on libsbuf.

libsbuf/Makefile:	Add a makefile for libsbuf.  This pulls in the
			sbuf sources from sys/kern.

bsd.libnames.mk:	Add LIBSBUF.

camcontrol/Makefile:	Add -lsbuf.  Since camcontrol is statically
			linked, we can't depend on the dynamic linker
			to pull in libsbuf.

camcontrol.c:		Use cam_error_print() instead of checking for
			CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9:			Change the prototypes for sbuf_cat() and
			sbuf_cpy() so that the source string is now a
			const char *.  This is more in line wth the
			standard system string functions, and helps
			eliminate warnings when dealing with a const
			source buffer.

			Fix a typo.

cam.c:			Add description strings for the various CAM
			error status values, as well as routines to
			look up those strings.

			Add new cam_error_string() and
			cam_error_print() routines for userland and
			the kernel.

cam.h:			Add a new CAM flag, CAM_RETRY_SELTO.

			Add enumerated types for the various options
			available with cam_error_print() and
			cam_error_string().

cam_ccb.h:		Add new transfer negotiation structures/types.

			Change inq_len in the ccb_getdev structure to
			be "reserved".  This field has never been
			filled in, and will be removed when we next
			bump the CAM version.

cam_debug.h:		Fix typo.

cam_periph.c:		Modularize cam_periph_error().  The SCSI error
			handling part of cam_periph_error() is now
			in camperiphscsistatuserror() and
			camperiphscsisenseerror().

			In cam_periph_lock(), increase the reference
			count on the periph while we wait for our lock
			attempt to succeed so that the periph won't go
			away while we're sleeping.

cam_xpt.c:		Add new transfer negotiation code.  (ifdefed
			out)

			Add a new function, xpt_path_string().  This
			is a string/sbuf analog to xpt_print_path().

scsi_all.c:		Revamp string handing and error printing code.
			We now use sbufs for much of the string
			formatting code.  More of that code is shared
			between userland the kernel.

scsi_all.h:		Get rid of SS_TURSTART, it wasn't terribly
			useful in the first place.

			Add a new error action, SS_REQSENSE.  (Send a
			request sense and then retry the command.)
			This is useful when the controller hasn't
			performed autosense for some reason.

			Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.  Selection
			timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]:		SF_RETRY_SELTO -> CAM_RETRY_SELTO.

			Get rid of the last vestiges of a read/write
			interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files:		Add bsearch.c, which is needed for some of the
			new table lookup routines.

aic7xxx_freebsd.c:	Define AHC_NEW_TRAN_SETTINGS if
			CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c:		Add the appropriate #ifdefs so sbufs can
			compile and run in userland.

			Change sbuf_printf() to use vsnprintf()
			instead of kvprintf(), which is only available
			in the kernel.

			Change the source string for sbuf_cpy() and
			sbuf_cat() to be a const char *.

			Add __BEGIN_DECLS and __END_DECLS around
			function prototypes since they're now exported
			to userland.

kdump/mkioctls:		Include stdio.h before cam.h since cam.h now
			includes a function with a FILE * argument.

Submitted by:	gibbs (mostly)
Reviewed by:	jdp, marcel (libsbuf makefile changes)
Reviewed by:	des (sbuf changes)
Reviewed by:	ken
2001-03-27 05:45:52 +00:00
Ruslan Ermilov
0a5779d45b - Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:33:27 +00:00
Ruslan Ermilov
fe655281c5 Set the default manual section for sbin/ to 8. 2001-03-20 18:13:31 +00:00
Ruslan Ermilov
1252c1bb05 Prepare for mdoc(7)NG. 2000-12-18 15:16:24 +00:00
Chris D. Faulhaber
b673f44d6d Properly check malloc(3) return values
Approved by:	ken
2000-12-01 12:02:16 +00:00
Kris Kennaway
797376317f Fix format string warnings 2000-11-27 07:28:15 +00:00
Ruslan Ermilov
7c7fb079b9 mdoc(7) police: use the new features of the Nm macro. 2000-11-20 16:52:27 +00:00
Kenneth D. Merry
de2464d3bc Adjust 'camcontrol negotiate -v' so it prints out the initiator ID from the
Path Inquiry CCB.
2000-09-17 20:42:28 +00:00
Warner Losh
fdcd5596ff optreset is declared in unistd.h, so we don't need to declare it here again.
Reviews by: ken
2000-08-16 15:36:14 +00:00
Kelly Yancey
354a0adabf Fix an order-of-operations bug and properly shift page_control values for
comparison with SMS_PAGE_CTRL_* macros.
2000-08-10 01:20:43 +00:00
Kelly Yancey
d996f0a884 Include new modepage list (-l) option in the verbose usage. 2000-08-09 21:29:22 +00:00
John Baldwin
34f71eeb3c Fix a typo in the last commit so that this compiles. 2000-08-09 00:28:09 +00:00
Kelly Yancey
cb498c18f8 Fix some whitespace errors.
Pointed out by:		ps
2000-08-08 09:27:55 +00:00
Kelly Yancey
9402dd9932 Replace -l with .Fl l
Pointed out by: sheldonh
2000-08-08 09:03:48 +00:00
Kelly Yancey
7e32b20d95 This is an overhaul of the mode page handling in camcontrol as well as
related patches. These include:
	* Mode page editting can be scripted. This involves two
	  things: first, if stdin is not a tty, changes are read from
	  stdin rather than invoking $EDITOR. Second, and more
	  importantly, not all modepage entries must be included in the
	  change set. This means that camcontrol can now gracefully handle
	  more intrusive editting from the $EDITOR, including removal or
	  rearrangement of lines. It also means that you can do stuff
	  like:
		# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
		# newfs /dev/da3
		# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
	* Range-checking on user-supplied input values. modeedit.c now
	  uses the field width specifiers to determine the maximum
	  allowable value for a field. If the user enters a value larger
	  than the maximum, it clips the value to the max and warns the
	  user. This also involved patching cam_cmdparse.c to be more
	  consistent with regards to the "count" parameter to arg_put
	  (previously is was the length of strings and 1 for all integral
	  types). The cam_cdbparse(3) man page was also updated to reflect
	  the revised semantics.
	* In the process, I removed the 64 entry limit on mode pages (not
	  that we were even close to hitting that limit). This was a nice
	  side-effect of the other changes.
	* Technically, the new mode editting functionality allows editting
	  of character array entries in mode pages (type 'c' or 'z'),
	  however since buff_encode doesn't grok them it is currently
	  useless.
	* Camcontrol gained two new options related to mode pages: -l and
	  -b. The former lists all available mode pages for a given
	  device. The latter forces mode page display in binary format
	  (the default when no mode page definition was found in
	  scsi_modes).
	* Added support for mode page names to scsi_modes. Allows names to
	  be displayed alongside mode numbers in the mode page
	  listing. Updated scsi_modes to use the new functionality. This
	  also adds the semicolon into the scsi_modes syntax as an
	  optional mode page definition terminator. This is needed to name
	  pages without providing a page format definition.
	* Updated scsi_all.h to include a structure describing mode page
	  headers.
	* Added $FreeBSD$ line to scsi_modes.

Inspired by:	dwhite
Reviewed by:	ken
2000-08-08 06:24:17 +00:00
Nick Hibma
f1f05bbb10 Print the correct speed when speed is less than 1MB/s.
Fixed in cam_xpt.c, r1.81

Submitted by:           Gerd Knops <gerti@bitart.com>
2000-07-01 21:28:49 +00:00
Kenneth D. Merry
9f4285439a When printing out the transfer rate display for 'camcontrol inquiry',
use the current setting for tagged queueing when deciding whether or not to
print "Tagged Queueing Enabled" instead of using the device's actual
capabilities.

This is more consistent with the rest of the transfer rate display, which
relies on current settings, and is more consistent with the way we display
things on boot.

Reported by:	Gustavo Vieira Goncalves Coelho Rios <kernel@tdnet.com.br>
Reviewed by:	mjacob
2000-06-28 02:48:31 +00:00
Kenneth D. Merry
b3550398d3 Eliminate the default device name (da) and unit number (0) in camcontrol.
This may break some scripts, but with the number of ways users can damage
a system with this tool, it's important to make sure they specify which
device they want to talk to.

Suggested by:	joerg
2000-06-04 02:43:55 +00:00
Kenneth D. Merry
33fab22e1c Use the Ic (Internal command) mdoc macro to denote camcontrol subcommands.
Submitted by:	sheldonh
2000-06-03 22:16:00 +00:00
Kenneth D. Merry
cee3fcd1a2 Send 'camcontrol help' usage output to stdout instead of stderr, so it
can be viewed more easily with a pager.

Regular (i.e. short) usage output is still sent to stderr.

PR:		bin/12358
Submitted by:	Christian Weisgerber <naddy@mips.rhein-neckar.de>
2000-06-03 22:07:56 +00:00
Kenneth D. Merry
96a93c63a8 Implement a new camcontrol function, 'camcontrol format'.
libcam/Makefile:	Add scsi_da.c to libcam for the new
			scsi_format_unit() function.

camcontrol.8:		Update the man page for the new format
			functionality, and take out the examples section
			describing how to do it with 'camcontrol cmd'.

camcontrol.c:		New format functionality.  Note that unlike the
			rest of the camcontrol subcommands, this one is
			interactive by default.  Because of the potential
			destructiveness of the format command, I thought
			it necessary to get confirmation from the user
			before spamming a disk.  You can disable the
			interactive behavior, and the status meter with
			command line arguments.

scsi_da.c:		Add the new scsi_format_unit() cdb building
			function and use #ifdef _KERNEL to make this file
			compile in both the kernel and userland.  The
			format unit function is currently only defined in
			the non-kernel case, because nothing in the kernel
			is using it.  If that changes, it should be
			un-ifdefed and compiled in both cases.

scsi_da.h:		New function declaration, CDB structure and format
			data structures.

Thanks to Nick Hibma for providing some valuable input on these changes.
2000-05-21 23:57:52 +00:00
Mike Pritchard
c793874313 Correct the usage of the ".Bd -literal -offset xxx" macro to use
a proper offset.  This silences warnings when the man page is
formated with groff.

PR:		bin/14534
2000-05-05 01:59:21 +00:00
Matthew Hunt
5beb2d87ea Typo ("frequencey"). 2000-03-15 20:48:01 +00:00
Sheldon Hearn
ef8f7ac935 Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 11:27:47 +00:00
Kenneth D. Merry
955f7e7474 Fix 'camcontrol inquiry'. The inquiry data structure changes (increased to
256 bytes) caused it to break on many devices.

The SCSI spec says that for commands with 8-bit length fields, a value of 0
means 256 bytes.  As it turns out, many devices don't deal with that
properly.  Some interpret the 0 as 0, and return no data.  Others return
more than 256 bytes of data, and cause an overrun.

The fix is to tell the device we've only allocated SHORT_INQUIRY_LENGTH (36
bytes) of inquiry data, instead of sizeof(struct scsi_inquiry_data).

camcontrol.c:		Change inq_len in the call to scsi_inquiry() to
			SHORT_INQUIRY_LENGTH, and add a long comment
			explaining the reason for the change.

scsi_all.h:		Add a comment above the definitinon of
			SHORT_INQUIRY_LENGTH alerting people that it is
			both the initial probe inquiry length, and the
			minimum amount of data needed for scsi_print_inquiry()
			to function.

scsi_all.c:		Add a comment about SHORT_INQUIRY_LENGTH being the
			minimum amount of data needed for
			scsi_print_inquiry() to function.

Reviewed by:	gibbs
Approved by:	jkh
Reported by:	"John W. DeBoskey" <jwd@unx.sas.com>
2000-02-20 04:42:44 +00:00
Kenneth D. Merry
b932a03c79 Fix a couple of typos in the 'camcontrol negotiate' output.
Submitted by:	T-Om <tom@iki.fi>
Approved by:	jkh
2000-02-04 07:30:27 +00:00
Matt Jacob
68a9f39184 Do some intptr_t casting for alpha.
Reviewed by:	ken@freebsd.org
2000-01-21 23:19:30 +00:00
Matt Jacob
cfe090e1fa Specify the system directory for which we put in our include path
as a separate line so we can override it on the command line if
we need to.

Reviewed by:	ken@freebsd.org
2000-01-21 23:18:08 +00:00
Matt Jacob
b1e7821bcb use XPT_GDEV_STATS- XPT_GDEV_TYPE was deprecated a while back 2000-01-16 20:03:34 +00:00
Kenneth D. Merry
b9e3972ac6 Fix the example in the bugs section. 1999-12-17 00:28:05 +00:00
Kenneth D. Merry
10e1cf639d Fix Bus Device Resets from userland, and specifically from camcontrol.
camcontrol was setup to use the old scheme of going through the xpt(4)
device, which never worked properly (and has been disabled for a while).

camcontrol now sends BDRs through the pass(4) device, and XPT_RESET_DEV
CCBs are put on the device queue in the transport layer, as they should be.

Submitted by:	luoqi
Reviewed by:	ken
1999-10-31 02:39:44 +00:00
Matthew Hunt
c0bdb22b84 Add references to cam(4) and xpt(4).
Delete references to cam(9) and xpt(9) which do not exist.
Delete statement in BUGS that cam(9) and xpt(9) will be added soon.

PR:		14567
Submitted by:	Ronald F. Guilmette <rfg@monkeys.com>
Approved by:	ken
1999-10-28 17:18:15 +00:00
Luoqi Chen
ac4197a61c Restore alphabetical order of command line options parsing.
Requested by:	ken
1999-10-26 22:43:23 +00:00
Luoqi Chen
ee5c2be765 Debug flags -T and -S were reversed. 1999-10-26 20:21:35 +00:00
Kenneth D. Merry
3def3fe132 Use mkstemp(3) instead of tmpnam(3) when creating temporary files for mode
page editing.

Submitted by:	roberto
Reviewed by:	imp, ken
1999-09-28 02:01:46 +00:00
Kenneth D. Merry
248e49ae05 Fix two rather embarrassing bugs in camcontrol. The first caused the
CAM_PASS_ERR_RECOVER flag to be set unconditionally on READ DEFECTS
commands, and also caused the CAM_DIR_IN flag to not be set.  This was
the cause of all of the "camcontrol defects doesn't work with my NCR
controller" bugs.

The second prevented camcontrol negotiate from negotiating any bus width
other than 8 bits.

Submitted by:	groudier@club-internet.fr (Gerard Roudier)
1999-09-27 06:12:57 +00:00
Bill Fumerola
cdf41ea250 -Wall cleanups, handle unknown cases.
Submitted by:	billf, ken
Reviewed by:	ken
1999-09-26 21:44:16 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Mike Pritchard
aa7c9adaea Various man page cleanup:
- Sort xrefs
- FreeBSD.ORG -> FreeBSD.org
- Properly xref RFCs.
- Be consistent with section names as outlined in mdoc(7).
- Other misc mdoc cleanup.

PR:		doc/13144
Submitted by:	Alexey M. Zelkin <phantom@cris.net>
1999-08-15 08:06:12 +00:00
SADA Kenji
8604fe2e70 Typo of sample command line.
Submitted by: Seiichi Satomi <ssatomi@rr.iij4u.or.jp>
1999-08-01 20:31:57 +00:00
Kenneth D. Merry
7c903b3d7e Add a MAINTAINER line to modules that I maintain.
Suggested by:	brian, markm
1999-06-18 00:41:47 +00:00
Kenneth D. Merry
b150665acf For vendor-specific commands sent using the 'camcontrol cmd' facility,
use the passed in CDB length, not 1.

Submitted by:	Jean-Marc Zucconi <jmz@FreeBSD.ORG>
1999-06-10 16:14:18 +00:00
Kenneth D. Merry
5a251d70c6 Fix a typo, and get rid of the bugs section that talks about adding
different ways to specify devices.  That code has been added.
1999-05-19 19:39:11 +00:00
Kenneth D. Merry
c60e19a83b Add a new device specification syntax to camcontrol. It is now possible to
do things like:

camcontrol tur da5
or
camcontrol tur 1:2:0
or
camcontrol tur 1:2

These changes are fully backwards compatible with the original device
specification syntax (-n dev -u unit), so it is possible to use either
method to specify a device now.

The device specification changes do not affect the rescan, reset or debug
commands, since by design, those commands work on a bus or bus:target:lun
basis only.

Also, shorten the default usage statement so that it fits in a 24 column
terminal.  The full usage statement is still available by using the "help"
"-h" or "-?" arguments to camcontrol.

Submitted by:	Joerg Wunsch <joerg_wunsch@interface-business.de>
1999-05-10 23:30:04 +00:00
Kenneth D. Merry
9deea8574e Add a number of interrelated CAM feature enhancements and bug fixes.
NOTE:  These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface.  A make world is recommended.

camcontrol.[c8]:
 - We now support two new commands, "tags" and "negotiate".

	- The tags commands allows users to view the number of tagged
	  openings for a device as well as a number of other related
	  parameters, and it allows users to set tagged openings for
	  a device.

	- The negotiate command allows users to enable and disable
	  disconnection and tagged queueing, set sync rates, offsets
	  and bus width.  Note that not all of those features are
	  available for all controllers.  Only the adv, ahc, and ncr
	  drivers fully support all of the features at this point.
	  Some cards do not allow the setting of sync rates, offsets and
	  the like, and some of the drivers don't have any facilities to
	  do so.  Some drivers, like the adw driver, only support enabling
	  or disabling sync negotiation, but do not support setting sync
	  rates.

 - new description in the camcontrol man page of how to format a disk
 - cleanup of the camcontrol inquiry command
 - add support in the 'devlist' command for skipping unconfigured devices if
   -v was not specified on the command line.
 - make use of the new base_transfer_speed in the path inquiry CCB.
 - fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

 - new flags on many CCB function codes to designate whether they're
   non-immediate, use a user-supplied CCB, and can only be passed from
   userland programs via the xpt device.  Use these flags in the transport
   layer and pass driver to categorize CCBs.

 - new flag in the transport layer device matching code for device nodes
   that indicates whether a device is unconfigured

 - bump the CAM version from 0x10 to 0x11

 - Change the CAM ioctls to use the version as their group code, so we can
   force users to recompile code even when the CCB size doesn't change.

 - add + fill in a new value in the path inquiry CCB, base_transfer_speed.
   Remove a corresponding field from the cam_sim structure, and add code to
   every SIM to set this field to the proper value.

 - Fix the set transfer settings code in the transport layer.

scsi_cd.c:

 - make some variables volatile instead of just casting them in various
   places
 - fix a race condition in the changer code
 - attach unless we get a "logical unit not supported" error.  This should
   fix all of the cases where people have devices that return weird errors
   when they don't have media in the drive.

scsi_da.c:

 - attach unless we get a "logical unit not supported" error

scsi_pass.c:

 - for immediate CCBs, just malloc a CCB to send the user request in.  This
   gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

 - change the CAM ioctls to use the CAM version as their group code.

adv driver:

 - Allow changing the sync rate and offset separately.

adw driver

 - Allow changing the sync rate and offset separately.

aha driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

 - Allow setting offset and sync rate separately

bt driver:

 - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

 - Fix the ultra/ultra 2 negotiation bug
 - allow setting both the sync rate and offset separately

Other HBA drivers:
 - Put code in to set the base_transfer_speed field for
   XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by:	gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
Kenneth D. Merry
f9d0451202 Fix misspelling of Julian's last name. Oops. 1999-02-27 07:56:08 +00:00
Justin T. Gibbs
b54ee7dda4 Properly print devices that do not have attached peripherals.
Submitted by: Kenneth Merry <ken@FreeBSD.org>
1999-01-14 05:56:30 +00:00
Matt Jacob
74f079ee35 Bad Dog! No Biscuit! *Never* commit without testing- even if it was
"just a printf formatting change"....
1998-12-20 20:32:34 +00:00
Matt Jacob
a2a4483652 add Bus and Device Reset commands 1998-12-20 18:51:56 +00:00
Bill Fumerola
1ac2383cb3 Insert missing macro, and while I'm here change the inconsistent
"page_ctl" and "pagectl" to "pgctl" to reflect ``camcontrol --help''.

PR:		docs/8781
Submitted by:	Norihiro Kumagai <kuma@jp.FreeBSD.org>
1998-12-02 22:42:36 +00:00
Kenneth D. Merry
b611e1e3fb Fix a typo in a comment. 1998-11-12 17:47:24 +00:00
Kenneth D. Merry
8e3278cbd6 When we send a stop unit command to a device, send it as an ordered tag so
that any transactions in front of the stop command get flushed to disk
first.  This will have no effect on devices that have tagged queueing
turned off, or don't support tagged queueing.

Reviewed by:	gibbs
1998-10-13 22:02:38 +00:00
Kenneth D. Merry
2e2b088cc2 Fix a bug in camcontrol that caused 'camcontrol start' to not work.
Noticed by:	Philippe Regnauld <regnauld@deepo.prosa.dk>
1998-10-13 16:23:26 +00:00
Kenneth D. Merry
de86eff58c Add a missing word. 1998-10-06 00:32:58 +00:00
Kenneth D. Merry
94d09127cb Add the -c flag in to the usage summaries in the man page and the usage()
function in camcontrol.

Also, fix the modepage example in the examples section of the man page.  It
didn't quite come out right with the '.Dl' macro.
1998-10-03 19:15:53 +00:00
Kenneth D. Merry
d05caa00c5 Add a new CAM debugging mode, CAM_DEBUG_CDB. This causes the kernel to
print out a one line description/dump of every SCSI CDB sent to a
particular debugging target or targets.

This is a good bit more useful than the other debugging modes, I think.

Change some things in LINT to note the availability of this new option.

Fix an erroneous argument to scsi_cdb_string() in scsi_all.c

Reviewed by:	gibbs
1998-10-02 21:00:58 +00:00
Kenneth D. Merry
8ff6dbfc74 Fix a grammar problem.
PR:		docs/7975
1998-09-21 20:44:39 +00:00
Kenneth D. Merry
46a1f3b423 Page control field values go from 0-3, not 1-4.
Reported by: Tony Maher <tonym@angis.usyd.edu.au> on -current
1998-09-17 16:12:30 +00:00
Kenneth D. Merry
d13d1cd2cc Fix a typo. "Primay" -> "Primary" 1998-09-17 05:10:23 +00:00
Justin T. Gibbs
525689f102 Camcontrol - A utility for configuring/manipulating the CAM subsystem
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 06:43:02 +00:00