Commit Graph

45 Commits

Author SHA1 Message Date
Andrey V. Elsukov
e028ccdad8 Add sets support for ipfw table info/list/flush commands.
PR:		212668
MFC after:	1 week
2017-05-02 05:02:12 +00:00
Andrey V. Elsukov
d8caf56e9e Add ipfw_nat64 module that implements stateless and stateful NAT64.
The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
 1. Create lookup tables:
 # ipfw table T46 create type addr valtype ipv6
 # ipfw table T64 create type addr valtype ipv4
 2. Fill T46 and T64 tables.
 3. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 4. Create NAT64 instance:
 # ipfw nat64stl NAT create table4 T46 table6 T64
 5. Add rules that matches the traffic:
 # ipfw add nat64stl NAT ip from any to table(T46)
 # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
 1. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 2. Create NAT64 instance:
 # ipfw nat64lsn NAT create prefix4 A.B.C.D/28
 3. Add rules that matches the traffic:
 # ipfw add nat64lsn NAT ip from any to A.B.C.D/28
 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Obtained from:	Yandex LLC
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
Andrey V. Elsukov
76d0325743 An old tables implementation had all tables preallocated,
so when user did `ipfw table N flush` it always worked, but now
when table N doesn't exist the kernel returns ESRCH error.
This isn't fatal error for flush and destroy commands. Do not
call err(3) when errno is equal to ESRCH. Also warn only when
quiet mode isn't enabled. This fixes a regression in behavior,
when old rules are loaded from file.
Also use correct value for switch in the table_swap().

Reported by:	Kevin Oberman
MFC after:	3 days
2016-08-01 13:38:48 +00:00
Andrey V. Elsukov
e62cd31f75 Hide warning about non-existent lookup tables and informational messages
about modified table entry when quied mode enabled.

Approved by:	re (hrs)
Obtained from:	Yandex LLC
2016-07-02 11:54:20 +00:00
Andrey V. Elsukov
2acdf79f53 Add External Actions KPI to ipfw(9).
It allows implementing loadable kernel modules with new actions and
without needing to modify kernel headers and ipfw(8). The module
registers its action handler and keyword string, that will be used
as action name. Using generic syntax user can add rules with this
action. Also ipfw(8) can be easily modified to extend basic syntax
for external actions, that become a part base system.
Sample modules will coming soon.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2016-04-14 22:51:23 +00:00
Eitan Adler
463a577b27 Fix a ton of speelling errors
arc lint is helpful

Reviewed By: allanjude, wblock, #manpages, chris@bsdjunk.com
Differential Revision: https://reviews.freebsd.org/D3337
2015-10-21 05:37:09 +00:00
Marcelo Araujo
b7684f4b85 Code cleanup unused-but-set-variable spotted by gcc.
Reviewed by:	melifaro
Approved by:	bapt (mentor)
Differential Revision:	D3473
2015-08-25 15:32:08 +00:00
Mark Felder
f5846f166c sbin/ipfw fix typo: info -> into
example:

DEPRECATED: inserting data into non-existent table sshguard. (auto-created)

Approved by:	bdrewery
2015-08-10 22:02:01 +00:00
Alexander V. Chernikov
8755aff6c9 Bring back support for checking tables via "ipfw -n".
Currently we have different table key types which can easily interfere
with each other (numbers and IPv4 address, interface names and hostnames,
  flows and hostnames/addresses).
This conflicts are solved by [auto-]creating _typed_ tables, so after
table is created, only keys of given type can be inserted to that table.
ipfw(8) consults with kernel about key/value type for particular table so
it knows key/value interpretation.
However, we have 2 cases (adding entries to non-existing table and
  parsing configuration file via `ipfw -n`) when kernel is unable to
  provide us table info we need. Fix the latter case by partially importing
  old `table_fill_xentry()` parse function responsible for guessing key type.

Sponsored by:	Yandex LLC
2015-05-19 18:29:13 +00:00
Alexander V. Chernikov
8a6dbb6455 Correctly print valtype for empty bitmask. 2015-05-06 11:23:14 +00:00
Alexander V. Chernikov
8963c5055d Generalize object reference handling in ipfw rules.
No ABI changes.
2015-04-26 10:53:35 +00:00
Andrey V. Elsukov
2530ed9e70 Fix `ipfw fwd tablearg'. Use dedicated field nh4 in struct table_value
to obtain IPv4 next hop address in tablearg case.

Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.

Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.

Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.

Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.

Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.

Differential Revision:	https://reviews.freebsd.org/D2015
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2015-03-13 09:03:25 +00:00
Alexander V. Chernikov
d3de6c1d2f * Fix table sets handling.
* Simplify formatting.

Suggested by:	luigi
2014-10-17 20:47:55 +00:00
Alexander V. Chernikov
9fe15d0612 Partially fix build on !amd64
Pointed by:	bz
2014-10-10 17:24:56 +00:00
Alexander V. Chernikov
68bde59ebe * Fix use-after-free in table printing code.
* Fix showing human-readable error in table cmds code.
2014-10-09 12:54:56 +00:00
Alexander V. Chernikov
d91c61c364 Fix GCC wardnings. 2014-10-04 17:21:30 +00:00
Alexander V. Chernikov
1a33e79969 Change copyrights to the proper one. 2014-09-05 14:19:02 +00:00
Alexander V. Chernikov
b646288126 Use per-function errno handling instead of global one.
Requested by:	luigi
2014-09-05 11:48:32 +00:00
Alexander V. Chernikov
0cba2b2802 Add support for multi-field values inside ipfw tables.
This is the last major change in given branch.

Kernel changes:
* Use 64-bytes structures to hold multi-value variables.
* Use shared array to hold values from all tables (assume
  each table algo is capable of holding 32-byte variables).
* Add some placeholders to support per-table value arrays in future.
* Use simple eventhandler-style API to ease the process of adding new
  table items. Currently table addition may required multiple UH drops/
  acquires which is quite tricky due to atomic table modificatio/swap
  support, shared array resize, etc. Deal with it by calling special
  notifier capable of rolling back state before actually performing
  swap/resize operations. Original operation then restarts itself after
  acquiring UH lock.
* Bump all objhash users default values to at least 64
* Fix custom hashing inside objhash.

Userland changes:
* Add support for dumping shared value array via "vlist" internal cmd.
* Some small print/fill_flags dixes to support u32 values.
* valtype is now bitmask of
  <skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>.
  New values can hold distinct values for each of this types.
* Provide special "legacy" type which assumes all values are the same.
* More helpers/docs following..

Some examples:

3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6
3:41 [1] zfscurr0# ipfw table mimimi info
+++ table(mimimi), set(0) +++
 kindex: 2, type: addr
 references: 0, valtype: skipto,limit,ipv4,ipv6
 algorithm: addr:radix
 items: 0, size: 296
3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1
added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1
3:42 [1] zfscurr0# ipfw table mimimi list
+++ table(mimimi), set(0) +++
10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
2014-08-31 23:51:09 +00:00
Alexander V. Chernikov
4bbd15771b Make room for multi-type values in struct tentry. 2014-08-15 12:58:32 +00:00
Alexander V. Chernikov
c21034b744 Replace "cidr" table type with "addr" type.
Suggested by:	luigi
2014-08-14 21:43:20 +00:00
Alexander V. Chernikov
fd0869d547 * Document internal commands.
* Do not require/set default table type if algo name is specified.
* Add TA_FLAG_READONLY option for algorithms.
2014-08-14 17:31:04 +00:00
Alexander V. Chernikov
35df97d0e2 * Do not crash on incorrect "flow" type inputs.
* Do not auto-create tables for operations other than add.
2014-08-13 06:16:37 +00:00
Alexander V. Chernikov
be695df9c3 * Update table_handler cmd list
* Implement partial cmd matching inside table handler.
2014-08-12 18:02:10 +00:00
Alexander V. Chernikov
4f43138ade * Add the abilify to lock/unlock given table from changes.
Example:

# ipfw table si lock
# ipfw table si info
+++ table(si), set(0) +++
 kindex: 0, type: cidr, locked
 valtype: number, references: 0
 algorithm: cidr:radix
 items: 0, size: 288
# ipfw table si add 4.5.6.7
ignored: 4.5.6.7/32 0
ipfw: Adding record failed: table is locked
# ipfw table si unlock
# ipfw table si add 4.5.6.7
added: 4.5.6.7/32 0
# ipfw table si lock
# ipfw table si delete 4.5.6.7
ignored: 4.5.6.7/32 0
ipfw: Deleting record failed: table is locked
# ipfw table si unlock
# ipfw table si delete 4.5.6.7
deleted: 4.5.6.7/32 0
2014-08-11 18:09:37 +00:00
Alexander V. Chernikov
3a845e1076 * Add support for batched add/delete for ipfw tables
* Add support for atomic batches add (all or none).
* Fix panic on deleting non-existing entry in radix algo.

Examples:

# si is empty
# ipfw table si add 1.1.1.1/32 1111 2.2.2.2/32 2222
added: 1.1.1.1/32 1111
added: 2.2.2.2/32 2222
# ipfw table si add 2.2.2.2/32 2200 4.4.4.4/32 4444
exists: 2.2.2.2/32 2200
added: 4.4.4.4/32 4444
ipfw: Adding record failed: record already exists
^^^^^ Returns error but keeps inserted items
# ipfw table si list
+++ table(si), set(0) +++
1.1.1.1/32 1111
2.2.2.2/32 2222
4.4.4.4/32 4444
# ipfw table si atomic add 3.3.3.3/32 3333 4.4.4.4/32 4400 5.5.5.5/32 5555
added(reverted): 3.3.3.3/32 3333
exists: 4.4.4.4/32 4400
ignored: 5.5.5.5/32 5555
ipfw: Adding record failed: record already exists
^^^^^ Returns error and reverts added records
# ipfw table si list
+++ table(si), set(0) +++
1.1.1.1/32 1111
2.2.2.2/32 2222
4.4.4.4/32 4444
2014-08-11 17:34:25 +00:00
Alexander V. Chernikov
720ee730c6 Kernel changes:
* Fix buffer calculation for table dumps
* Fix IPv6 radix entiries addition broken in r269371.

Userland changes:
* Fix bug in retrieving statric ruleset
* Fix several bugs in retrieving table list
2014-08-08 21:09:22 +00:00
Alexander V. Chernikov
adf3b2b9d8 * Add IP_FW_TABLE_XMODIFY opcode
* Since there seems to be lack of consensus on strict value typing,
  remove non-default value types. Use userland-only "value format type"
  to print values.

Kernel changes:
* Add IP_FW_XMODIFY to permit table run-time modifications.
  Currently we support changing limit and value format type.

Userland changes:
* Support IP_FW_XMODIFY opcode.
* Support specifying value format type (ftype) in tablble create/modify req
* Fine-print value type/value format type.
2014-08-08 09:27:49 +00:00
Alexander V. Chernikov
28ea4fa355 Remove IP_FW_TABLES_XGETSIZE opcode.
It is superseded by IP_FW_TABLES_XLIST.
2014-08-08 06:36:26 +00:00
Alexander V. Chernikov
46d5200874 Implement atomic ipfw table swap.
Kernel changes:
* Add opcode IP_FW_TABLE_XSWAP
* Add support for swapping 2 tables with the same type/ftype/vtype.
* Make skipto cache init after ipfw locks init.

Userland changes:
* Add "table X swap Y" command.
2014-08-03 21:37:12 +00:00
Alexander V. Chernikov
358b9d09ed * Move "talist" and "iflist" cmds into newly-create "internal" ipfw(8) cmd.
* Add "table X detail" cmd and show detailed algo info there instead
  of "info".
2014-08-03 16:22:14 +00:00
Alexander V. Chernikov
5f379342d2 Show algorithm-specific data in "table info" output. 2014-08-03 12:19:45 +00:00
Alexander V. Chernikov
4c0c07a552 * Permit limiting number of items in table.
Kernel changes:
* Add TEI_FLAGS_DONTADD entry flag to indicate that insert is not possible
* Support given flag in all algorithms
* Add "limit" field to ipfw_xtable_info
* Add actual limiting code into add_table_entry()

Userland changes:
* Add "limit" option as "create" table sub-option. Limit modification
  is currently impossible.
* Print human-readable errors in table enry addition/deletion code.
2014-08-01 15:17:46 +00:00
Alexander V. Chernikov
914bffb6ab * Add new "flow" table type to support N=1..5-tuple lookups
* Add "flow:hash" algorithm

Kernel changes:
* Add O_IP_FLOW_LOOKUP opcode to support "flow" lookups
* Add IPFW_TABLE_FLOW table type
* Add "struct tflow_entry" as strage for 6-tuple flows
* Add "flow:hash" algorithm. Basically it is auto-growing chained hash table.
  Additionally, we store mask of fields we need to compare in each instance/

* Increase ipfw_obj_tentry size by adding struct tflow_entry
* Add per-algorithm stat (ifpw_ta_tinfo) to ipfw_xtable_info
* Increase algoname length: 32 -> 64 (algo options passed there as string)
* Assume every table type can be customized by flags, use u8 to store "tflags" field.
* Simplify ipfw_find_table_entry() by providing @tentry directly to algo callback.
* Fix bug in cidr:chash resize procedure.

Userland changes:
* add "flow table(NAME)" syntax to support n-tuple checking tables.
* make fill_flags() separate function to ease working with _s_x arrays
* change "table info" output to reflect longer "type" fields

Syntax:
ipfw table fl2 create type flow:[src-ip][,proto][,src-port][,dst-ip][dst-port] [algo flow:hash]

Examples:

0:02 [2] zfscurr0# ipfw table fl2 create type flow:src-ip,proto,dst-port algo flow:hash
0:02 [2] zfscurr0# ipfw table fl2 info
+++ table(fl2), set(0) +++
 kindex: 0, type: flow:src-ip,proto,dst-port
 valtype: number, references: 0
 algorithm: flow:hash
 items: 0, size: 280
0:02 [2] zfscurr0# ipfw table fl2 add 2a02:6b8::333,tcp,443 45000
0:02 [2] zfscurr0# ipfw table fl2 add 10.0.0.92,tcp,80 22000
0:02 [2] zfscurr0# ipfw table fl2 list
+++ table(fl2), set(0) +++
2a02:6b8::333,6,443 45000
10.0.0.92,6,80 22000
0:02 [2] zfscurr0# ipfw add 200 count tcp from me to 78.46.89.105 80 flow 'table(fl2)'
00200 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
0:03 [2] zfscurr0# ipfw show
00200   0     0 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 617 59416 allow ip from any to any
0:03 [2] zfscurr0# telnet -s 10.0.0.92 78.46.89.105 80
Trying 78.46.89.105...
..
0:04 [2] zfscurr0# ipfw show
00200   5   272 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 682 66733 allow ip from any to any
2014-07-31 20:08:19 +00:00
Alexander V. Chernikov
8ce7a2bc03 Improve "ipfw talist" readability. 2014-07-30 15:01:32 +00:00
Alexander V. Chernikov
b23d5de9b6 * Add number:array algorithm lookup method.
Kernel changes:
* s/IPFW_TABLE_U32/IPFW_TABLE_NUMBER/
* Force "lookup <port|uid|gid|jid>" to be IPFW_TABLE_NUMBER
* Support "lookup" method for number tables
* Add number:array algorihm (i32 as key, auto-growing).

Userland changes:
* Support named tables in "lookup <tag> Table"
* Fix handling of "table(NAME,val)" case
* Support printing "number" table data.
2014-07-30 14:52:26 +00:00
Alexander V. Chernikov
9d099b4f38 * Dump available table algorithms via "ipfw talist" cmd.
Kernel changes:
* Add type/refcount fields to table algo instances.
* Add IP_FW_TABLES_ALIST opcode to export available algorihms to userland.

Userland changes:
* Fix cores on empty input inside "ipfw table" handler.
* Add "ipfw talist" cmd to print availabled kernel algorithms.
* Change "table info" output to reflect long algorithm config lines.
2014-07-29 22:44:26 +00:00
Alexander V. Chernikov
68394ec88e * Add generic ipfw interface tracking API
* Rewrite interface tables to use interface indexes

Kernel changes:
* Add generic interface tracking API:
 - ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
  state & bumps ref)
 - ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
  update ifindex)
 - ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
 - ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.

* Rewrite interface tables to use iface tracking API. Currently tables are
  implemented the following way:
  runtime data is stored as sorted array of {ifidx, val} for existing interfaces
  full data is stored inside namedobj instance (chained hashed table).

* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces

* Pass @chain ptr to most non-locked algorithm callbacks:
  (prepare_add, prepare_del, flush_entry ..). This may be needed for better
  interaction of given algorithm an other ipfw subsystems

* Add optional "change_ti" algorithm handler to permit updating of
  cached table_info pointer (happens in case of table_max resize)

* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs

Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
2014-07-28 19:01:25 +00:00
Alexander V. Chernikov
db785d3199 * Require explicit table creation before use on kernel side.
* Add resize callbacks for upcoming table-based algorithms.

Kernel changes:
* s/ipfw_modify_table/ipfw_manage_table_ent/
* Simplify add_table_entry(): make table creation a separate piece of code.
  Do not perform creation if not in "compat" mode.
* Add ability to perform modification of algorithm state (like table resize).
  The following callbacks were added:
 - prepare_mod (allocate new state, without locks)
 - fill_mod (UH_WLOCK, copy old state to new one)
 - modify (UH_WLOCK + WLOCK, switch state)
 - flush_mod (no locks, flushes allocated data)
 Given callbacks are called if table modification has been requested by add or
   delete callbacks. Additional u64 tc->'flags' field was added to pass these
   requests.
* Change add/del table ent format: permit adding/removing multiple entries
   at once (only 1 supported at the moment).

Userland changes:
* Auto-create tables with warning
2014-07-26 13:37:25 +00:00
Alexander V. Chernikov
81d3153d61 * Add "lookup" table functionality to permit userland entry lookups.
* Bump table dump format preserving old ABI.

Kernel size:
* Add IP_FW_TABLE_XFIND to handle "lookup" request from userland.
* Add ta_find_tentry() algorithm callbacks/handlers to support lookups.
* Fully switch to ipfw_obj_tentry for various table dumps:
  algorithms are now required to support the latest (ipfw_obj_tentry) entry
    dump format, the rest is handled by generic dump code.
  IP_FW_TABLE_XLIST opcode version bumped (0 -> 1).
* Eliminate legacy ta_dump_entry algo handler:
  dump_table_entry() converts data from current to legacy format.

Userland side:
* Add "lookup" table parameter.
* Change the way table type is guessed: call table_get_info() first,
  and check value for IPv4/IPv6 type IFF table does not exist.
* Fix table_get_list(): do more tries if supplied buffer is not enough.
* Sparate table_show_entry() from table_show_list().
2014-07-06 18:16:04 +00:00
Alexander V. Chernikov
ac35ff1784 Fully switch to named tables:
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
  instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
  number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables

Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask  retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
2014-07-03 22:25:59 +00:00
Alexander V. Chernikov
6c2997ffec * Add new IP_FW_XADD opcode which permits to
a) specify table ids as names
  b) add multiple rules at once.
Partially convert current code for atomic addition of multiple rules.
2014-06-29 22:35:47 +00:00
Alexander V. Chernikov
563b5ab132 Suppord showing named tables in ipfw(8) rule listing.
Kernel changes:
* change base TLV header to be u64 (so size can be u32).
* Introduce ipfw_obj_ctlv generc container TLV.
* Add IP_FW_XGET opcode which is now used for atomic configuration
  retrieval. One can specify needed configuration pieces to retrieve
  via flags field. Currently supported are
  IPFW_CFG_GET_STATIC (static rules) and
  IPFW_CFG_GET_STATES (dynamic states).
  Other configuration pieces (tables, pipes, etc..) support is planned.

Userland changes:
* Switch ipfw(8) to use new IP_FW_XGET for rule listing.
* Split rule listing code get and show pieces.
* Make several steps forward towards libipfw:
  permit printing states and rules(paritally) to supplied buffer.
  do not die on malloc/kernel failure inside given printing functions.
  stop assuming cmdline_opts is global symbol.
2014-06-28 23:20:24 +00:00
Alexander V. Chernikov
d3a4f9249c Simplify opcode handling.
* Use one u16 from op3 header to implement opcode versioning.
* IP_FW_TABLE_XLIST has now 2 handlers, for ver.0 (old) and ver.1 (current).
* Every getsockopt request is now handled in ip_fw_table.c
* Rename new opcodes:
IP_FW_OBJ_DEL -> IP_FW_TABLE_XDESTROY
IP_FW_OBJ_LISTSIZE -> IP_FW_TABLES_XGETSIZE
IP_FW_OBJ_LIST -> IP_FW_TABLES_XLIST
IP_FW_OBJ_INFO -> IP_FW_TABLE_XINFO
IP_FW_OBJ_INFO -> IP_FW_TABLE_XFLUSH

* Add some docs about using given opcodes.
* Group some legacy opcode/handlers.
2014-06-15 13:40:27 +00:00
Alexander V. Chernikov
f1220db8d7 Move further to eliminate next pieces of number-assuming code inside tables.
Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)

Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes
2014-06-14 22:47:25 +00:00