is also returned by pthread_detach() if a thread was already
detached, the error code was already documented:
> [EINVAL] The implementation has detected that the value speci-
> fied by thread does not refer to a joinable thread.
* Correct a signed/unsigned problem that broke handling of files >2G.
* Implement "skip" support for much faster "tar -t".
Thanks to: Robert Sciuk for sending me a DVD that illustrated the first problem
* If write block size is zero, don't block at all.
This supports the unusual requirement of applications
that need "no-delay" writes.
* Expose _write_finish_entry() to give such applications more
control over write boundaries. (Normal applications do not
need this, as entries are completed automatically.)
* Correct the type of write callbacks; this is a minor API
change that does not affect the ABI.
* Correct the error handling in _write_next_header() around
completing the previous entry.
* Correct the documentation for block-size markers: Remove
docs for the long-defunct _read_set_block_size(); document
all of the write block size manipulators.
MFC after: 14 days
traditional shortcut of defining on-disk layouts using structures of
character arrays. Unfortunately, as recently discussed on cvs-all@,
this usage is not actually sanctioned by the standards and
specifically fails on GCC/arm (unless your data structures happen to
be "naturally aligned").
The new code defines offsets/sizes for data fields and accesses
them using explicit pointer arithmetic, instead of casting to
a structure and accessing structure fields. In particular,
the new code is now clean with WARNS=6 on arm.
MFC after: 14 days
and correct the use of unary minus with an unsigned value. (The unary
minus here is actually being used as a bitwise operation, which is
unusual enough to deserve a clarifying cast.)
archive_{read,write}_open_filename():
* Update Makefile to build the files using the new name.
* Update docs to document the new names, mentioning the
old ones as "deprecated synonyms."
* The old filenames will be reconnected to the build soon;
I'll soon recyce those files for a slightly different purpose.
internal format-specific functions return the same as the public
function, so that the public API layer doesn't have to guess the
correct return value. This addresses an obscure problem that occurs
when someone tries to write more data than the size of the entry (as
indicated in the entry header). In this case, the return value from
archive_write_data() was incorrect, reflecting the requested write
rather than the amount actually written.
MFC after: 15 days
- make document title match filename;
- remove hard sentence breaks, whitespace at EOL, and double whitespace;
- sort SEE ALSO xrefs, adding missing section numbers;
- fix a misspelled macro name.
* Use public API, don't access struct archive directly. (People should be able to copy these into their applications as a template for custom I/O callbacks.)
* Set "skip" only for regular files. ("skip" allows the low-level library to catch attempts to add an archive to itself or extract over itself.)
* Simplify the write_open functions by just calling stat() at the beginning. Somehow, these functions had acquired some complex logic that tried to avoid the stat() call but never succeeded.
MFC after: 10 days
file. This doesn't happen in normal use, because the file I/O and
decompression layers only pass through smaller blocks. It can happen
with custom read functions that block I/O in larger blocks.
* Actually use the HAVE_<header>_H macros to conditionally include
system headers. They've been defined for a long time, but only
used in a few places. Now they're used pretty consistently
throughout.
* Fill in a lot of missing casts for conversions from void*.
Although Standard C doesn't require this, some people have been
trying to use C++ compilers with this code, and they do require it.
Bit-for-bit, the compiled object files are identical, except for
one assert() whose line number changed, so I'm pretty confident I
didn't break anything. ;-)
h_errno is not an extern int, just a macro providing an integer lvalue.
PR: doc/50573
Submitted by: Ronald F.Guilmette <rfg@monkeys.com>
Reviewed by: trhodes
MFC after: 3 days
following fix:
Retransmission timeouts should be based on which attempt
it is to the nameserver and not the nameserver itself.
Obtained from: ISC
MFC after: 3 days
Remove the const qualifier from ap argument for __v2printf, that induced
that breakage, and seems to be the real reason for bad code. ap is modified
inside the __v2printf body by va_arg macro.
Pointy hat to: kib
Approved by: pjd (mentor)
i386 with default optimization level (-O2), va_list pointer ap in the
__v2printf function is advanced before the use. That cause argument
shift and garbage instead last argument in printf-family when xprintf is
activated.
The nsswitch is easy victim of the bug.
Reviewed by: kan
Approved by: kan (mentor)
MFC after: 1 week
Issue __sflush() before possible setting O_APPEND mode or ftruncate(),
write to wrong place may occurse oserwise.
Use simplified _sseek() to the start, if no O_APPEND is set, instead
of _fseeko() (_sseek() to the end, if O_APPEND, occurse later, as for
file != NULL).
Don't check seek error return, as original fopen() and freopen() never
does.
file != NULL:
Add missing _sseek() to the end.
thread signal mask has been updated to avoid stack overflow during signal
bursts.
Don't block signal forever if no threads can currently handle signal.
Check for pending signal after direct invocation of signal handler.
UNIX signalling semantics require that processes in the same
session always be able to deliver SIGCONT to one another,
overriding the remaining protections.
Fix SIGCONT special case description similar to rev. 1.22 kill.2.
PR: docs/58710
Submitted by: Ryan Younce
MFC after: 2 weeks
restore it directly and skip chmod() during the post-extract fixup.
In particular, bsdtar -xm now completely skips the post-extract fixup
for directories, which produces a noticable speedup in that case.
With the first part of my previous Summer of Code work, we get:
-made libalias modular:
-support for 'particular' protocols (like ftp/irc/etcetc) is no more
hardcoded inside libalias, but it's available through external
modules loadable at runtime
-modules are available both in kernel (/boot/kernel/alias_*.ko) and
user land (/lib/libalias_*)
-protocols/applications modularized are: cuseeme, ftp, irc, nbt, pptp,
skinny and smedia
-added logging support for kernel side
-cleanup
After a buildworld, do a 'mergemaster -i' to install the file libalias.conf
in /etc or manually copy it.
During startup (and after every HUP signal) user land applications running
the new libalias will try to read a file in /etc called libalias.conf:
that file contains the list of modules to load.
User land applications affected by this commit are ppp and natd:
if libalias.conf is present in /etc you won't notice any difference.
The only kernel land bit affected by this commit is ng_nat:
if you are using ng_nat, and it doesn't correctly handle
ftp/irc/etcetc sessions anymore, remember to kldload
the correspondent module (i.e. kldload alias_ftp).
General information and details about the inner working are available
in the libalias man page under the section 'MODULAR ARCHITECTURE
(AND ipfw(4) SUPPORT)'.
NOTA BENE: this commit affects _ONLY_ libalias, ipfw in-kernel nat
support will be part of the next libalias-related commit.
Approved by: glebius
Reviewed by: glebius, ru
don't be greedy on the GNU "::" extension when arg separated by whitespace
and POSIX_CORRECTLY is set. From POSIX point of view this is unclear
situation, so minimal assumption looks right.
we can find another way to issue an #error, but using a preprocessed
assembler for that purpose and clobbering libc.a with an empty .o
just for the sake of #error reporting is way too much of a burden.
* Expose functions for setting the "skip file" dev/ino information
* Expose functions for setting/querying the block size on reads
* Correctly propagate errors out of archive_read_close/archive_write_close
* Update manpage with information about new functions
o avoid using a global register variable.
o redefine struct ia64_tp as a union. We don't have to get to the
fields themselves. We just need it to be of the right size with
the right alignment.
16-byte aligned. Consequently, struct tcb is a multiple of 16
bytes in size. We need to make sure there's no padding after
struct ppc32_tp. We do this by explicitly adding the necessary
padding in front of it.
include path will already point to the populated include tree. This
is left over from boot-strapping the build and install of libbsm
during the initial import and merge.
Obtained from: TrustedBSD Project
Pointed out by: ru
o The TLS pointer (r2) points 0x7000 after the *end* of the TCB.
o _rtld_allocate_tls() gets a pointer to the current TCB, not the
current TLS pointer.
o _rtld_free_tls() gets the size of the TCB structure.
into pthread structure to keep track of locked PTHREAD_PRIO_PROTECT mutex,
no real mutex code is changed, the mutex locking and unlocking code should
has same performance as before.
(size_t)(num * size) == 0
but both num and size are nonzero.
Reported by: Ilja van Sprundel
Approved by: jasone
Security: Integer overflow; calloc was allocating 1 byte in
response to a request for a multiple of 2^32 (or 2^64)
bytes instead of returning NULL.
The symptom is that syslog() fails to log anything but the "ident"
string if LOG_PERROR is specified to openlog(3) and the extensible
printf is in action.
For unclear, likely quaint historical reasons, syslog uses fwopen()
on a stack buffer, rather than using the more straightforward
and faster snprintf().
Along the way, fflush(3) is called, and since the callback writer
function returns zero instead of the length "written", __SERR
naturally gets set on the filedescriptor.
The extensible printf, in difference from the normal printf refuses
to output anything to an __SERR marked filedescriptor, and thus
the actual syslog message is supressed.
MFC: after 2 weeks
old resolver opened just one socket, BIND9's resolver may
open more than one sockets. And, BIND9's resolver doesn't
close the socket on timeout. So, we need this check.
Reported by: freebsd-cvs-src__at__oldach.net (Helge Oldach), bz
Hinted by: rwatson
integer. Presently, our implementation employs an approach that
converts the value to int64_t, then back to int, unfortunately,
this approach can be problematic when the the difference between
the two time_low is larger than 0x7fffffff, as the value is then
truncated to int.
To quote the test case from the original PR, the following is
true with the current implementation:
865e1a56-b9d9-11d9-ba27-0003476f2e88 < 062ac45c-b9d9-11d9-ba27-0003476f2e88
However, according to the DCE specification, the expected result
should be:
865e1a56-b9d9-11d9-ba27-0003476f2e88 > 062ac45c-b9d9-11d9-ba27-0003476f2e88
This commit adds a new intermediate variable which uses int64_t
to store the result of subtraction between the two time_low values,
which would not introduce different semantic of the MSB found in
time_low value.
PR: 83107
Submitted by: Steve Sears <sjs at acm dot org>
MFC After: 1 month
increases performance when extracting a single entry from a large
uncompressed archive, especially on slow devices such as USB hard
drives.
Requires a number of changes:
* New archive_read_open2() supports a 'skip' client function
* Old archive_read_open() is implemented as a wrapper now, to
continue supporting the old API/ABI.
* _read_open_fd and _read_open_file sprout new 'skip' functions.
* compression layer gets a new 'skip' operation.
* compression_none passes skip requests through to client.
* compression_{gzip,bzip2,compress} simply ignore skip requests.
Thanks to: Benjamin Lutz, who designed and implemented the whole thing.
I'm just committing it. ;-)
TODO: Need to update the documentation a little bit.
pax wasn't introduced until the 1993 (?) revision.
(I need to double-check when pax was introduced and
clarify some of the history here. In particular,
I should explain that the 'pax' standard now owns the
'ustar' format spec.)
runtime using BN_CTX_new(). This is done since in OpenSSL 0.9.7e we
can only allocate BN_CTX on the stack by including an internal OpenSSL
header file, and in OpenSSL 0.9.8 BN_CTX is entirely opaque, so having
it on the stack is not possible at all.
This is done as preparation for OpenSSL 0.9.8b import.
Tested on: amd64 i386 ia64
Tested with: src/tools/regression/lib/libmp
wait(), waitpid() and usleep(), they are internal versions and
should not be cancellation points.
2. Make wait3() as a cancellation point.
3. Move raise() and pause() into file thr_sig.c.
4. Add functions _sigsuspend, _sigwait, _sigtimedwait and _sigwaitinfo,
remove SIGCANCEL bit in wait-set for those functions, the signal is
used internally to implement thread cancellation.
in rev. 1.34. Mainly I missed the fact that the buffer is used for two
purposes:
1) storing a group line from the group file;
2) __gr_parse_entry() parses the buffer and tries to put the group
members to the remaining part of the buffer and can fail if there
is no enough room for them.
Re-arrange the buffer size checks to account the latter case.
Submitted by: Kirk R Webb
MFC after: 2 weeks
