Use 1000 * major + minor when calculating the version number that
gets set in the Ficl environment or lua loader property. This allows
for more room if the minor number needs to go above 9.
Add loader.version property to lua loader.
Reviewed by: imp
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39631
There's no need for an arch pointer to get segments. We can call the
routine directly since we don't need this code to be called from
different context where a pointer is needed.
Sponsored by: Netflix
Reviewed by: kevans, andrew
Differential Revision: https://reviews.freebsd.org/D38266
zfs lives in libsa. However, it depends on nvstore (and other things)
that are in common. Fix part of this layering violation by splitting
nvstore into a libsa piece (which is the base implementation) and
keeping a much smaller common piece (to implement the nvstore
command). This just leaves zfs' knowledge of device names that's
specific to common and its calling platform specific init code to
resolve. Add a nvstore.h file for these two parts to communicate private
things and move the public nvstore api from bootstrap.h to stand.h.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38043
Pull together the nearly identical copies of set_currdev in i386,
userboot and efi. Other boot loaders have variances that might be fine
to use the common routine, or not. Since they are harder to test for me,
and ofw and uboot do handle these setting differently, leave them be for
now.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38005
Since dev_cleanup() walks through all the devsw devices with dv_cleanup
rotuines, move it into libsa rather than having it in
'common'. Logically, it operates only on things that are in libsa, and
would never be different for different loaders: either people would call
it as is, or they'd do the loop themselves with 'special' things inline
between calls to cleanup (not that I think that will ever be needed
though).
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38004
Replace 4 identical copies of *_setcurrdev with gen_setcurrdev to avoid
having to create a 5th copy. uboot_setcurrdev is actually different and
needs to remain separate (even though it's quite similar).
Sponsored by: Netflix
Reviewed by: fuz@fuz.su, kevans
Differential Revision: https://reviews.freebsd.org/D38003
interp_has_builtin_cmd() will try to lookup the passed in command and
returns true if it was found, false otherwise.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36364
Set module_verbose to control the printing of information
about loaded modules and kernel:
0 MODULE_VERBOSE_SILENT None
1 MODULE_VERBOSE_SIZE Pathname and size
2 MODULE_VERBOSE_TWIDDLE as for 1 but also twiddle for progress
3 MODULE_VERBOSE_FULL extra detail
When the loader is verifying modules we already have a
running indication of progress and module_verbose=0 makes sense.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D34245
Store whether or not we found a vbefb module (eg, a tg supported kernel)
in the preloaded_file structure. This automatically resets on reload and
eliminates load_elf knowing about any gfx_* interface. Restrict this to
i386, which is the only place it's used. Update libi386 to check in the
preloaded_file struct. Eliminate this from the teken_gfx
structure. Rewrite the parsing code to be more inline. Check this from
the same place we check for a relocatable amd64 kernel.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33427
We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
On amd64, add a possibility to activate kernel with staging area in place.
Add 'copy_staging' command to control this. For now, by default the
old mode of copying kernel to 2M phys is retained. It is going to be
changed in several weeks.
On amd64, add some slop to the staging area to satisfy both requirements
of the kernel startup allocator, and to have space for minor staging data
increase after the final size is calculated. Add a new command
'staging_slop' to control its size.
Improve staging area resizing, in particular, reallocate it anew if
we cannot grow it neither down nor up.
Reviewed by: kevans, markj
Discussed with: emaste (the delivery plan)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
This adds tslog_init, which allocates a 2MB buffer for recording
timestamped events; and tslog_publish, which takes the buffer and
passes it to the kernel as a "preloaded module". These functions
will be used in a later commit.
Reviewed by: kevans
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
These are picked out by the amd64-gcc6 build; time() is declared in <time.h>
and delay() is declared in <bootstrap.h>. These are the correct places for
these in stand/, so remove the duplicate declarations and make sure the
delay() consumer in libefi that depended on the extra delay() declaration
includes <bootstrap.h>.
MFC after: 1 week
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
The switch to lualoader creates a problem with userboot: the host is
inclined to build userboot with Lua, but the host userboot's interpreter
must match what's available on the guest. For almost all FreeBSD guests in
the wild, Lua is not yet available and a Lua-based userboot will fail.
This revision updates userboot protocol to version 5, which adds a
swap_interpreter callback to request a different interpreter, and tries to
determine the proper interpreter to be used based on how the guest
/boot/loader is compiled. This is still a bit of a guess, but it's likely
the best possible guess we can make in order to get it right. The
interpreter is now embedded in the resulting executable, so we can open
/boot/loader on the guest and hunt that down to derive the interpreter it
was built with.
Using -l with bhyveload will not allow an intepreter swap, even if the
loader specified happens to be a userboot with the wrong interpreter. We'll
simply complain about the mismatch and bail out.
For legacy guests without the interpreter marker, we assume they're 4th.
For new guests with the interpreter marker, we'll read it and swap over
to the proper interpreter if it doesn't match what the userboot we're using
was compiled with.
Both flavors of userboot are installed by default, userboot_4th.so and
userboot_lua.so. This fixes the build WITHOUT_FORTH as a coincidence, which
was broken by userboot being forced to 4th.
Reviewed by: imp, jhb, araujo (earlier version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D16945
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
* Make autoboot() a static function in stand/common/boot.c, so it does
not shadow local variables in gptboot.c and zfsboot.c.
* Remove -Winline from the Makefiles for gptboot, gptzfsboot and
zfsboot, as gcc will always fail to inline some functions, and there
is nothing we can do about it.
* For gcc <= 4.2.1, silence -Wuninitialized for isoboot, as it produces
a false positive warning.
* Remove deprecated and unnecessary -mcpu=i386 flag from stand/defs.mk,
as there is already a -march=i386 flag further in the file.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15628
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
akin to what Pedro Souza and Wojciech Koszek did in the lua GSoC with
interp.h, interp_simple.c and changes to interp.c and interp_forth.c,
but completely redone from scratch.
This effectively restores the spirit of r326712 (my first attempt to
bring in Pedro's and Wojciech's work) updated for new requirements
that had silently broke their original work. This change also differs
by using fixed function names instead of function pointers to simply
things. Only one interpreter at a time may be compiled in.
Also of note: we take a mutable string, pass it in via a const char *
pointer into intrp_forth's interp_run(). We then cast away the const
to pass into ficlExec since ficl would require extensive changes to
properly const-poison. See Sections 6.5.2.5 and 6.7.3 of C11 standard
noting it's only UB if you modify a const object through a non-const
pointer, but not char [] -> const char * -> char * as here.
On POWER8 with current petitpoot, the loader.kboot might be
run as little-endian application. The FreeBSD kernel is
always big-endian, so the load_elf_* routines must be aware
of proper endianness of all fields.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D12422
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.
Submitted by: Netflix
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.
Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.
Sponsored by: Netflix
