Commit Graph

90 Commits

Author SHA1 Message Date
Wilko Bulte
1217303f75 add support for NetMos NM9805 1284 Printer port
Submitted by: Willy Offermans <W.K.Offermans@TUe.nl>

MFC after: 2 weeks
2005-02-09 18:38:28 +00:00
Marcel Moolenaar
2554d6b9b4 Revert rev. 1.5.
It should be safe to attach to all Z8530 controllers again. In fact,
the keyboard works on Ultra 2 machines.

MFC after: 5 days
2005-01-31 04:25:48 +00:00
Bruce M Simpson
3e19d3c0f0 Add PCI ID for Dell RAC IV/ERA Virtual UART (PowerEdge 1850).
Trim name of existing Dell RAC devices. Trim comments.

With help from:	dpk at dpk dot net
MFC after:	1 week
2005-01-27 01:17:32 +00:00
Bruce M Simpson
0502030614 Add device description for the Dell Remote Access Card (DRAC) III and IV
virtual COM port. This makes the use of the Dell OpenManage tools on FreeBSD
considerably easier, and is based on Chuck Cranor's original patch for 4.6.

Reviewed by:	imp
Tested by:	dpk at dpk dot net
MFC after:	1 week
2005-01-20 15:40:50 +00:00
Warner Losh
774363d3cf Revert part of last commit that was unintentional 2005-01-11 07:18:17 +00:00
Warner Losh
ac673f9a82 Use the standard FreeBSD license 2005-01-11 06:24:40 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Wilko Bulte
cc1d7d872e Add support for Chase/Perle PCI FAST-4 4 port serial cards which appear
to be the same as Boca Research Turbo Serial 654 (4 serial port).
While add the 8 port variants as well.

Submitted by: sten@blinkenlights.nl
PR: kern/75793
MFC after: 1 week
2005-01-05 20:06:04 +00:00
Marcel Moolenaar
982ea33b89 Apply a bandaid to avoid hangs on Ultra 2 machines. The second Z8530
connects to the keyboard and mouse and needs some special treatment.
Until this is fully understood, implemented and tested, simply avoid
probing the second Z8530. This is also what the zs(4) driver does.
2004-11-15 02:47:37 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Warner Losh
a4da0c4b6b Remove duplicate FreeBSD id 2004-07-01 17:23:49 +00:00
Warner Losh
87573bee79 While this file still needs __RMAN_RESOURCE_VISIBLE to get the size of
the struct resource for a malloc, it no longer needs it for the r_
elements of struct resource with this commit.
2004-07-01 17:23:11 +00:00
Warner Losh
b13117994e Remove extra RMAN_RESOURCE_VISISBLE 2004-06-30 21:37:55 +00:00
Warner Losh
23bb544b55 puc needs to peek into struct resource too. 2004-06-30 21:27:59 +00:00
Poul-Henning Kamp
38a674b384 This needs __RMAN_RESOURCE_VISIBLE 2004-06-30 21:24:19 +00:00
Poul-Henning Kamp
186f2b9e04 Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Roman Kurakin
b25d0ae0cb Add description of Cronyx Omega2-PCI (8x port serial adapter). 2004-05-17 12:57:30 +00:00
Maxim Sobolev
f6520c9c48 Add IC Book Labs Gunboat x2 and x4 series of serial adapters.
Hardware provided by:	IC Book Labs
MFC After:	2 weeks
2004-04-24 13:04:00 +00:00
Bruce Evans
8a148d55b7 Moved the function pointer in struct puc_device_description to the end
of the struct, so that a placeholder for it (or unportable C99
initializers) are not needed for entries that don't use it.  Use a C99
initializer for the 1 entry that uses it.  Removed 91 placeholders.
This also restores API compatibility with NetBSD and RELENG_4 for most
entries.
2004-04-18 14:37:27 +00:00
Bruce Evans
bd1516c8e6 Miscellaneous style fixes, including yet another attempt to get the
0x1393/0x1041 entry and its bad templates right.
2004-04-18 07:36:41 +00:00
Bruce Evans
361994141b Fixed some style bugs in rev.1.1 (only 2 entries were misformatted). 2004-04-18 07:06:45 +00:00
Bruce Evans
afe167a0e0 Fixed some style bugs (perfect tab lossage on every line) in rev.1.4. 2004-04-18 06:49:26 +00:00
Bruce Evans
3fd635c702 Fixed some style bugs (misformatting) in rev.1.9. 2004-04-18 06:42:27 +00:00
Bruce Evans
921e623763 Oops, fixed some more style bugs (tab lossage) in rev.1.28. Fixed the
same style bug in revs.1.20, 1.18, 1.15 and 1.12.
2004-04-18 06:36:12 +00:00
Bruce Evans
00dcaee469 Fixed some style bugs in rev.1.24. Almost every line was misformatted,
and Oxford was misspelled.
2004-04-18 05:52:35 +00:00
Bruce Evans
e096ea4428 Fixed some style bugs (formatting errors) in rev.1.25. 2004-04-18 05:46:37 +00:00
Bruce Evans
d4e132ea17 Fixed some style bugs (tab lossage) in rev.1.26.
Removed the requirement for a particular subvendor/subproduct in
rev.1.26 (VScom PCI-800L card).  While the BARs, etc., may depend on
the sub-ids, this is not known to be so, and I think it is better to
guess that they don't.  The decision to check sub-id checks in this
file is apparently random; for VScom cards they were checked in 3 of
8 cases.

Reviewed by:	timeout by committer (joerg) after 6 months
2004-04-18 05:30:02 +00:00
Bruce Evans
ba8fc6ca62 Fixed some style bugs in rev.1.28. Almost every line was misindented. 2004-04-18 04:48:53 +00:00
Bruce Evans
0efcc68bc8 Fixed a style bug (insertion sort error) in rev.1.29. This file should
be sorted in the same order as misc/pci_vendors (on vendor/device id),
and already partly is.
2004-04-18 04:44:28 +00:00
Bruce Evans
3f7fbb5497 Fixed some style bugs in previous commit. Almmost every line was
misformatted.
2004-04-18 04:31:58 +00:00
Colin Percival
a58deb4616 Add support for Exsys EX-41098 cards.
PR:		kern/65040
Submitted by:	Stefan Grundmann <sg-sendpr@waset.de>
Tested by:	buildkernel
"Just commit it" by: phk
2004-04-17 11:57:34 +00:00
Marcel Moolenaar
cc81fed63c Ever since rev 1.27 of puc.c, the port number that was exposed by puc(4)
and used by uart(4) for the channel conflicted with the port offset for
the Z8530. The Z8530 has the channels reversed (i.e. channel B is at
offset 0 and channel A is at offset 4). Assign the port offsets in the
right order so that uart(4) will properly attach to the channels.

Submitted by: Marius Strobl <marius@alchemy.franken.de>
2004-04-05 01:58:02 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
John Baldwin
890cefab5b Expand the mask for the Avlab Technology, PCI IO 2S entry to cover the
2S-650 and 2S-850 variants.

PR:		kern/45285
Submitted by:	Andrey Zakharchenko <avz AT jscc.ru>
MFC after:	1 week
2004-02-04 18:01:02 +00:00
John Baldwin
7cd06e089c Add support for an non-branded SUN1889-based 2 port PCI serial card.
PR:		kern/55159
Submitted by:	Yeasah Pell <yeasah@apocalypse.org>
MFC after:	1 week
2003-12-31 17:51:18 +00:00
David E. O'Brien
6ea7b5bcdf Add support for Moxa Technologies' Smartio CP-104UL/PCI 4S RS232 card.
Submitted by:	Guido Falsi <mad@madpilot.net>
2003-12-09 17:31:25 +00:00
Warner Losh
347934fa63 Sometimes cardbus attachments don't attach, so while we track down
this problem put these lines back in.  While they should be
unnecessary, they appear to be sometimes necessary.

Reviewed in concept: dfr
Approved by: re (scottl@)
2003-11-28 05:28:29 +00:00
Doug Rabson
0be389f3ca Remove explicit cardbus attachments from drivers where this is identical
to the pci attachment. Cardbus is a derived class of pci so all pci
drivers are automatically available for matching against cardbus devices.

Reviewed by: imp
2003-11-03 09:22:18 +00:00
Warner Losh
6a0e476222 const char ** needs to be passed, not char **. 2003-10-27 06:41:40 +00:00
Doug Ambrisko
43e42f3688 Add support for another multiple serial port card based on OX16PCI954 device
id 0x950a.

MFC:	after 4.9 release.
2003-10-24 22:34:56 +00:00
Marcel Moolenaar
153bbe3e6a Make the port number available to the sub-device with PUC_IVAR_PORT. 2003-09-26 04:44:55 +00:00
Joerg Wunsch
0ec6e98386 Add an entry for the VScom (Titan?) PCI-800L 8-port serial multiport
card.

Thanks to bde for his help in configuring the undocumented bars in
this driver...

MFC after:	1 month
2003-09-19 19:55:08 +00:00
Marcel Moolenaar
dc7d0dea12 Enhance puc(4) to support uart(4). This includes:
o  Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4),
o  Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530)
   to handle different hardware and determine resource sizes.
o  Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both
   are used by uart(4) to get sufficient information to talk to the HW.
o  Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O
   if I/O port space cannot be allocated, or vice versa.
o  Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching
   to sio(4) fails (due to not having the sio driver).
o  Put struct puc_device_description in struct puc_softc instead of
   having a pointer to a device description in the softc. This allows
   us to create device descriptions on the fly without having to use
   malloc() or otherwise have them staticly defined.
o  Move puc_find_description() from puc.c to puc_pci.c as it's specific
   to PCI.
o  Add EBUS and SBUS frontends for use on sparc64. Note that the P in
   puc stands for PCI, so we kinda mess things up here. It's too soon
   to worry about it though. We'll know what to do about it in time.

NOTE: This commit changes the behaviour of puc(4) to not quieten the
device probe and attach for child devices. The uart(4) driver provides
additional device description that is valuable to have.
2003-09-06 21:48:50 +00:00
John Baldwin
729d7ffbcf - Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long.
- Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds
  the header type.
- Replace several magic numbers with appropriate constants for the header
  type register and a couple of PCI_FUNCMAX.
- Merge to amd64 the fix to the i386 bridge code to skip devices with
  unknown header types.

Requested by:	imp (1, 2)
2003-08-28 21:22:25 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Doug Ambrisko
6cb38a02e0 Add in a missing device entry that I thought was already in there. This
is from the same PR.  Prompted by the reporter of the PR.

PR:		38372
2003-08-21 03:54:20 +00:00
Pierre Beyssac
4530e20aae Add support for the newer Moxa PCI 8-port, 16550-compatible based
CP-168U board. It initializes and attaches in the same way as the
older (but higher performance) C168H. The only difference is the
board ID, which is 0x1681.

PR:		kern/53548
Submitted by:	regnauld@catpipe.net
MFC after:	1 week
2003-08-14 14:15:16 +00:00
Bruce Evans
40f018905b Support the Titan VScom PCI-200HV2 2 port serial card.
MFC after:	3 days
2003-08-02 13:25:31 +00:00
Doug Ambrisko
a373227418 Add printer support to puc(4) driver.
-	Move isa/ppc* to sys/dev/ppc (repo-copy)
      -	Add an attachment method to ppc for puc
      -	In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms.  Testers
wanted.

PR:		38372 (in spirit done differently)
Verified by:	Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00