Commit Graph

48 Commits

Author SHA1 Message Date
Hartmut Brandt
bfbb5daa0f Use a size_t where a buffer length is meant. 2003-07-29 13:33:14 +00:00
David E. O'Brien
152385d122 Explicitly declare 'int' parameters. 2003-04-21 16:27:46 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Hartmut Brandt
dce4c82d8e When we have found a chunk of memory that is large enough and have computed
a correctly aligned address in this block we really want to check, that the
part of the chunk that starts at the aligned address is large enough with
regard to the original request. Comparing it to 0 makes no sense, because this
is always true except in the rare case, that the aligned address is just at
the end of the chunk.

Approved by:	jake (mentor)
2003-02-27 08:56:41 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
John Baldwin
672cc99ed3 - Change the ATM stack functions to use intptr_t instead of int for opaque
arguments.
- Fix a few other places that assumed that sizeof(int) == sizeof(void *).

Reviewed by:	mdodd
2002-11-08 18:27:30 +00:00
John Baldwin
f77f866d28 Adjust some casts to quiet warnings.
Reviewed by:	mdodd
2002-11-06 22:58:55 +00:00
Robert Drehmel
4bcea0f89c Cast the first argument to bzero() to `void *' after casting it to
`uintptr_t' to pass it as the type bzero() expects.
2002-10-16 11:15:35 +00:00
Matthew N. Dodd
c12ef98f27 Create/destroy memory zones on module load/unload, not on device
attach/detach.
2002-10-02 04:42:24 +00:00
Matthew N. Dodd
f72e17e233 Add a field to struct cmn_unit to hold a pointer to the driver's softc. 2002-10-01 22:04:31 +00:00
Andrew R. Reiter
9561b109ae - Remove DMA_* macros as only one, DMA_GET_ADDR, was used.
- Convert DMA_GET_ADDR() calls to vtophys() calls in order to finish
  removing the DMA_* macros.
2002-06-24 05:03:44 +00:00
Andrew R. Reiter
c3f9fb1a24 - Remove the definition for SCHED_ATM
- Change SCHED_ATM statements into schednetisr() calls.
2002-06-24 04:10:12 +00:00
Andrew R. Reiter
b6037a7953 - Turn the hea and hfa HARP storage pools into UMA zones and insert
the necesary uma_zcreate() and uma_zdestroy calls into module loading
  handler and the device attach handling.
- Change the related HARP netatm code to use UMA zone functions when
  dealing with the zones that were formerly the ATM interface (hea, hfa)
  storage pools.
- Have atm_physif_freenifs() now get passed an uma_zone_t so that we can
  properly free the allocated NIF's back to their zone.

This should be the last commit to remove any code that makes use of the
netatm storage pool api.  I will be removing the api code within the near
future.

Reviewed by:	mdodd
2002-06-14 16:59:38 +00:00
Alfred Perlstein
d6d246bc1c This actually compiles under lint now, by effectively #if 0'ing it
when compiling LINT, linking LINT was broke, so unbreak by removing
the preprocessor directives.
2002-06-11 21:22:32 +00:00
Matthew N. Dodd
14eaf06493 Recognize Adaptec ANA-5910/30/40[A] boards.
Read the MAC address from Adaptec boards correctly.

Bits borrowed from sys/pci/if_en_pci.c.
2002-06-07 05:23:01 +00:00
Matthew N. Dodd
33b04e2fcb Move some code around.
Minor whitespace changes.
2002-06-07 01:55:42 +00:00
Matthew N. Dodd
b20d4649f9 Quick and dirty convert to newbus. (Eventually 'eni.c' should go away.)
Module loads and unloads properly.

Thanks to Richard Hodges <rh@matriplex.com> for donating the hardware
to allow me to work on this driver.
2002-06-03 09:16:52 +00:00
Andrew R. Reiter
cfaf7ad37a - Remove KM_ macro calls and replace with the real function we're calling.
As a note, this driver needs the same updating as the hfa driver was
  just given; removing these macros since I will be nuking them from
  netatm.
2002-04-19 17:43:11 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Peter Wemm
e542f1d7b7 Fix warnings 2002-02-27 23:53:02 +00:00
Jeroen Ruigrok van der Werven
1a6e52d0e9 Fix typo: seperate -> separate.
Seperate does not exist in the english language.
2001-02-06 11:21:58 +00:00
Peter Wemm
b348bd9392 Minor tweaks to get these to stop breaking LINT. They still dont work
and emit warnings, but we need to get the test coverage elsewhere.
2001-01-17 01:08:50 +00:00
Poul-Henning Kamp
a3671bc8c8 Add back some now needed #include <sys/systm.h>
Fix various warnings while here anyway.
2000-12-07 22:19:06 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Poul-Henning Kamp
8879e52387 Add back some #include <sys/systm.h> which were needed when <sys/ktr.h>
doesn't mess us up.

Noted by:	Harti Brandt <brandt@fokus.gmd.de>
2000-10-30 20:37:01 +00:00
Poul-Henning Kamp
bb2e7ebb7c Remove 86 unneeded #includes 2000-10-27 21:32:10 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Poul-Henning Kamp
2d99f9a72c Remove even more nneeded #includes. 2000-10-14 15:57:44 +00:00
Poul-Henning Kamp
67b0d5b9ea Remove the #include kitchensink <netatm/kern_include.h> and add
the #includes to the respective source files.

Also un-nest includes in <dev/hfa/fore_include.h>

I have run src/tools/tools/kerninclude to remove 1239 clearly
unneeded #includes reducing the total from 3524 includes to 2285.
2000-10-12 08:14:20 +00:00
Poul-Henning Kamp
6cb2a0952f Do some cleanups of the HARP atm codes interface into the system:
Define the NETISR just like all the other NETISRs.

unifdef -Usun -D__FreeBSD__  we will probably never support sun4c
and if we do we can't use the solaris code anyway and  I doubt
anybody will be running Fore ATM cards in then in the first place.
2000-10-12 00:03:50 +00:00
Mike Spengler
96cdb64ea9 Remove un-needed #include's.
Pointed out by: phk
2000-01-17 20:49:59 +00:00
Eivind Eklund
4cb867eea6 Incorrect uses of NULL changed to 0 1999-12-21 08:24:35 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Mike Smith
fcb893a801 Implement a new generic mechanism for attaching handler functions to
events, in order to pave the way for removing a number of the ad-hoc
implementations currently in use.

Retire the at_shutdown family of functions and replace them with
new event handler lists.

Rework kern_shutdown.c to take greater advantage of the use of event
handlers.

Reviewed by:	green
1999-08-21 06:24:40 +00:00
Mike Spengler
9ce49f6de3 Allow configuration of up to 256 network interfaces per physical interface -
just like the docs say it should.
1999-05-10 23:02:29 +00:00
Mike Spengler
8abd11a431 Enable PCI bus master during attach in case the BIOS hasn't done it for us. 1999-05-10 22:53:45 +00:00
Peter Wemm
579f45fa60 Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00
Peter Wemm
96b3554e5c Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
Eivind Eklund
437250056e Shorten line.
Prodded by:	bde
1999-04-12 14:31:28 +00:00
Eivind Eklund
505ab9b86b Staticize. 1999-04-11 02:55:52 +00:00
Matthew Dillon
b4e36adf1c Fix warnings preparing for -Wall -Wcast-qual
Also disable one usb module in LINT due to fatal compilation errors,
    temporary.
1999-01-27 20:09:21 +00:00
Matthew Dillon
2cbe36f725 probe function changed from returning char * to const char *. 1998-12-14 06:37:37 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Poul-Henning Kamp
264b85f3ce Trivial stylish changes, mostly to silence gcc.
Reviewed by:	Mike Spengler <mks@networkcs.com>
Submitted by:	phk
1998-10-31 20:07:01 +00:00
Poul-Henning Kamp
baf8bbb7d3 Add a missing ++.
Noticed by:	gcc via phk
Submitted by:	Mike Spengler <mks@networkcs.com>
1998-10-18 11:58:57 +00:00
Poul-Henning Kamp
d80044954c Two patches from the HARP people:
Various Makefile related fixes.

-Wformat fixes.

Submitted by:	Mike Spengler <mks@networkcs.com>
1998-09-17 09:35:02 +00:00
Poul-Henning Kamp
1820df7a2d Add new files for HARP3
Host ATM Research Platform (HARP), Network Computing Services, Inc.
This software was developed with the support of the Defense Advanced
Research Projects Agency (DARPA).
1998-09-15 08:23:17 +00:00