Commit Graph

1335 Commits

Author SHA1 Message Date
Peter Wemm
365c5db0a7 Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
Bruce Evans
3aae7b16d2 Fixed the type of some ivar access functions. Ivars have type uintptr_t,
not u_long.  On i386's with 64-bit longs, returning u_longs indirectly
in (more than) the space reserved for uintptr_t's tended to corrupt the
previous frame pointer in the stack frame, so it was not easy to debug.
The type mismatches are hidden by the bogus cast in DEVMETHOD().
2000-04-30 10:01:56 +00:00
Peter Wemm
5a54cb4145 Add a missing MODULE_DEPEND() on miibus.. I was working from
KMODDEPS which this driver didn't have.
2000-04-29 15:25:56 +00:00
Peter Wemm
95a1645553 Depend on miibus.
Note that if_aue doesn't strictly depend on usb because it uses the
method interface for calls rather than using internal symbols, and
because it's a child driver of usb and therefore will not try and do
anything unless the parent usb code is loaded at some point.  if_aue does
strictly depend on miibus as it will fail to link if it is missing.
2000-04-29 13:41:57 +00:00
Julian Elischer
a4ec03cfa8 Two simple changes to the kernel internal API for netgraph modules,
to support future work in flow-control and 'packet reject/replace'
processing modes.

reviewed by: phk, archie
2000-04-28 17:09:00 +00:00
Poul-Henning Kamp
d4032b0b10 Ignore tulip chips on LanMedia WAN cards. 2000-04-25 21:45:45 +00:00
Bill Paul
27440dd237 Update the Tigon firmware to 12.3.21. This fixes a few bugs and adds support
for cards with 2MB of on-board SRAM.
2000-04-24 17:44:45 +00:00
Bill Paul
bd80fa2c7f Reoganize/update the SysKonnect driver:
- Break out the support for the XMAC II's PHY into an miibus driver.

- Reorganize the probe/attach stuff using newbus. Each XMAC is now
  attached to the parent GEnesis controller using newbus. This is
  necessary since each XMAC must also have an attached miibus, and
  the miibus read/write register routines need to be able to get
  at the softc struct for each XMAC, not the one for the parent
  controller. This allows me to get rid of the grotty code I added
  for selecting the unit numbers for the ifnet interfaces: the unit
  numbers are now derived from the newbus-assigned unit numbers,
  which should track with the ifnet interface numbers. I think.
  At the very least, there should never be any collisions.

- Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special
  thanks to SysKonnect for loaning me two adapters for testing.
2000-04-22 02:16:41 +00:00
Warner Losh
748fdadaad Add TI-1211 chipset from datasheet info 2000-04-20 03:16:49 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Poul-Henning Kamp
ed6aff7387 Remove unneeded <sys/buf.h> includes.
Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.
2000-04-18 15:15:39 +00:00
Yoshihiro Takahashi
f3e2cba02f Set the value of rid variable for bus_alloc_resource(dev, SYS_RES_IOPORT,...)
to PCI_BASE_ADDR0 (== 0x10).

Tested by:	Brian Somers <brian@Awfulhak.org>
2000-04-12 11:21:55 +00:00
Semen Ustimenko
0f9ee76b22 Driver is now using miibus, and newbus.
PR:		kern/17601
2000-04-12 06:51:43 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Yoshihiro Takahashi
249253e7a0 Newbusify amd driver.
Some error messages are added by Brian Somers <brian@Awfulhak.org>.
2000-04-07 11:36:11 +00:00
Mitsuru IWASAKI
2058e7f3e0 Fix typo in description of Cirrus Logic PD6832 PCI-CardBus Bridge.
This don't hurt anything.
	PCI/CardBus Bridge -> PCI-CardBus Bridge

Submitted by:	Takeshi Shibagaki <sibagaki@lsi.melco.co.jp>
Obtained from:	bsd-nomads ML in Japan
2000-03-30 18:47:00 +00:00
Bill Paul
7cfa339426 Two fixes for the RealTek:
- Only call m_pullup() when necessary.

- Check return value from rl_encap() in rl_start() to avoid panic when
  we run out of mbufs. (Fixes PR kern/17582)

PR:		kern/17582
2000-03-29 20:06:15 +00:00
Chris Piazza
7e1e216acf Add NVidia GeForce 2 and Quadro 2
Ids and names were taken from nv4_disp.inf in the latest windows drivers.
2000-03-29 06:49:25 +00:00
David Greenman
e9bf2fa7b3 Added support for cards and on-motherboard NICs that use an SEEPROM
address size that is different than the standard 6bits. This fixes
support for the Compaq NC3121 card, certain newer Intel Pro/100+
cards, and should also fix integrated NICs on SuperMicro and Compaq
motherboards.
The auto-sizing algorithm was taken from NetBSD (thanks!), which I
think got it from Linux originally.
Thanks also to Andrew Sparrow <spadger@best.com> and Joe Moore
<jomor@ahpcns.com> for supplying me with unworking Compaq and Intel
cards to develop and test the fixes with.
2000-03-28 04:41:42 +00:00
Warner Losh
d0d3b8345b Ahhrggg. Put the test for the compat shims AFTER the file that includes
them.

Pointed out by: bde
2000-03-27 20:24:02 +00:00
Poul-Henning Kamp
b9d308bed2 Allow reuse of hooks.
Remove debugging printfs.
Now compatible with ports/net/mpd-netgraph
2000-03-27 20:05:04 +00:00
Warner Losh
2b2ca8019f This file is obsolete, having long since been copied to sys/dev/adw/adw_pci.c
Pointed out by: gibbs
2000-03-27 19:57:40 +00:00
Jonathan Lemon
db4f9cc703 Add support for offloading IP/TCP/UDP checksums to NIC hardware which
supports them.
2000-03-27 19:14:27 +00:00
Warner Losh
76fbc068b8 Per conversations in -current, add #error to these drivers when you don't
have the right compatibility shims enabled.  ISA drivers to follow later.
2000-03-27 18:32:45 +00:00
Warner Losh
6ea2fbe9be More fully initialize cardbus bridges. We now call the new generic
cardbus bridge init routine for all cardbuses.  This routine attempts
to compensate for BIOSes that do not setup the cardbus bridge into
legacy mode.  Since this is becoming more common, and cardbus pci
cards have appeared on the market, this makes sense.

Do some TI113x specific initialization.  This came in as part of the
patch.  Report TI1[1234]XX specific config registers protected by
bootverbose.

Minor code cleanup while I'm here.  I've also removed the unused code
present in the original patches, and cleaned it up slightly in places
as well.

The original patches supported more than one card, but these patches
support just one.  We should likely revisit this in the future.

This makes the Compaq card that Walnut Creek CD purchased for me work
in my bouncer box.

This is a MFC candidate.  However, I'd like to get some airtime on
these patches on as many laptops as possible before doing the MFC.  It
does change things somewhat.  In theory, apart from the minor TI
tweaks, this shouldn't change anything if the bridge is in legacy mode
already.

Submitted by: sanpei@sanpei.org (MIHIRA Yoshiro)
2000-03-25 20:29:55 +00:00
Warner Losh
190701a53a Two new chips found in Steve Passe's Protoge' laptop:
Lucent 56Flex DVS LTMOTEM (winmodem and unsupported)
	Cinemaster C 3.0 DVD Decoder
2000-03-25 17:01:59 +00:00
Bill Fumerola
a68c41beea Add Mach64-LB graphics accelerator
Submitted by:	Brandon Martus <bmartus@chc-chimes.com> (unwittingly)
Obtained from:	NetBSD (syssrc/sys/dev/pci/pcidevs)
2000-03-24 19:31:02 +00:00
Poul-Henning Kamp
91266b96c4 Isolate the Timecounter internals in their own two files.
Make the public interface more systematically named.

Remove the alternate method, it doesn't do any good, only ruins performance.

Add counters to profile the usage of the 8 access functions.

Apply the beer-ware to my code.

The weird +/- counts are caused by two repocopies behind the scenes:
	kern/kern_clock.c -> kern/kern_tc.c
	sys/time.h -> sys/timetc.h
(thanks peter!)
2000-03-20 14:09:06 +00:00
Peter Wemm
0ae2f9bf04 A fairly simple newbusification of if_de 2000-03-20 09:18:46 +00:00
Peter Wemm
d213a95368 Unused definitions. 2000-03-20 08:21:52 +00:00
Peter Wemm
56dac036b6 Bandaid for src/sys/modules which broke world 2000-03-20 01:22:27 +00:00
Peter Wemm
80060e8897 Connect the ISA and PCI compatability shims to an option. In this case
it's options COMPAT_OLDISA and COMPAT_OLDPCI.  This is meant to be a
fairly strong incentive to update the older drivers to newbus, but doesn't
(quite) leave anybody hanging with no hardware support.  I was talking with
a few folks and I was encouraged to simply break or disable the shims but
that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
Nick Hibma
e5399702e8 Print the PCI resources even if they are disabled. This shows more clearly
when the BIOS is forgetful about initialising the USB controllers.
2000-03-18 19:18:36 +00:00
Bill Paul
827a61b63d Update Tigon firmware yet again, this time to version 12.3.20. 2000-03-18 01:30:36 +00:00
Matt Jacob
17d75f8ecb Alpha 8200 port: Until we fix things better, determine which alpha CPU
platform we're running on so we know how many bits to reserve at the top
end for the 'hose' value. It turns out that there's *just* enough room
to support all possible hoses on TurboLaser.
Reviewed by:	gallatin@freebsd.org, dfr@free3bsd.org
2000-03-15 23:50:31 +00:00
Nick Hibma
d0ba6675ce Add an ID for the SiS 5571.
Remove the unnecessary use of parent.
2000-03-15 22:26:17 +00:00
Peter Wemm
931fe729ca Remove left over pci_ide* after wd removal. 2000-03-15 21:58:27 +00:00
Poul-Henning Kamp
5111e26e96 Updates for new FALC chips and other nits.
(And try to make it first post-freeze commit :-)
2000-03-13 09:13:36 +00:00
Chris Piazza
4951dddb33 Recognize newer NVidia graphics cards. (GeForce and Quadro families)
Approved by:	jkh
2000-03-12 01:24:15 +00:00
Mike Smith
510a809e64 Teach the 'dc' driver how to pick up settings left over by the
SRM on alpha systems.  This is an expedient if not entirely
elegant solution to the problem.

Submitted by:	gallatin
Approved by:	jkh
2000-03-11 05:20:56 +00:00
Robert Watson
c8cf61e182 Introduce ethernet bridge support for if_dc
Approved by:	jkh
2000-03-09 19:28:19 +00:00
Poul-Henning Kamp
1285d5557c Fix a initialization bug.
Report xmit queue length.
Remove old magic and clean up some printfs.
2000-03-01 21:04:54 +00:00
Bill Fumerola
2394baefd8 'driver support' -> 'driver supports' 2000-02-29 10:02:29 +00:00
Matt Jacob
2e56bc770d Clean up defines for correct 12160/1080 exclusion. Final 4.0.
approved: JKH
2000-02-29 05:48:46 +00:00
Bruce Evans
71c458de9d Fixed configuration of fast interrupts for the pci cy driver. They were
an early newbus casualty.  The fix in rev.1.28 didn't work because the
most important part of it used a wrong macro name.

Approved by:	jkh
2000-02-28 08:12:24 +00:00
Poul-Henning Kamp
90a822243f Implement queue-limiting based on bandwidth.
Approved by:	jkh
2000-02-26 18:28:24 +00:00
Bill Fumerola
bebfe1cadb o No need to print the vendor/device ID for things that matched succesfully.
o ``<device name>'' versus ``device name'' for things that fall under nomatch.

Reviewed by:	dfr (in principle)
Approved by:	Baron von Hubbard
2000-02-22 21:44:39 +00:00
Bill Fumerola
a91df2ff09 Add the ESS Maestro and the ATI Mobility-1 to the generic chip match and
the vga match (respectivly, though they aren't much different anymore..)

These can be found on newer Dell laptops.

Approved by: Sir Hubbard
2000-02-21 21:46:19 +00:00
Nick Hibma
5e78bf3190 Move the warning on wrong IRQ values to the right place, before any
resource allocation is attempted.

It will present the user with a message that he has to switch on USB
support in his BIOS.
2000-02-20 14:22:44 +00:00
Doug Rabson
6874d62958 Remove the vga-pci driver. It serves no purpose and it hides the hardware
from useful drivers such as the 3D DRI drivers I will be porting for
hardware accelerated OpenGL. The hardware will still be reported during
boot using the nomatch system.

Approved by: jkh
2000-02-19 09:44:06 +00:00