This ensures the interface is initialized by the interface driver
before it can be used by the rest of the system.
Reviewed by: jhb, karels, gnn
MFC after: 3 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8905
- iflib - add checksum in place support (mmacy)
- iflib - initialize IP for TSO (going to be needed for e1000) (mmacy)
- iflib - move isc_txrx from shared context to softc context (mmacy)
- iflib - Normalize checks in TXQ drainage. (shurd)
- iflib - Fix queue capping checks (mmacy)
- iflib - Fix invalid assert, em can need 2 sentinels (mmacy)
- iflib - let the driver determine what capabilities are set and what
tx csum flags are used (mmacy)
- add INVARIANTS debugging hooks to gtaskqueue enqueue (mmacy)
- update bnxt(4) to support the changes to iflib (shurd)
Some other various, sundry updates. Slightly more verbose changelog:
Submitted by: mmacy@nextbsd.org
Reviewed by: shurd
mFC after:
Sponsored by: LimeLight Networks and Dell EMC Isilon
If you run "ifconfig lagg0 destroy" and "ifconfig lagg0" at the same time a
page fault may result. The first process will destroy ifp->if_lagg in
lagg_clone_destroy (called by if_clone_destroy). Then the second process
will observe that ifp->if_lagg is NULL at the top of lagg_port_ioctl and
goto fallback: where it will promptly dereference ifp->if_lagg anyway.
The solution is to repeat the NULL check for ifp->if_lagg
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8512
This is a work in progress and some of this stuff may change;
but hopefully I'm laying down enough stuff and space in fields
to allow it to grow without another major recompile.
We'll see!
* Add a net80211 PHY type for VHT 2G and VHT 5G.
Note - yes, VHT is supposed to be for 5GHZ, however some vendors
(*cough* most of them) support some subset of VHT rate support
in 2GHz. No - not 80MHz wide channels, but at least some MCS8-9
support, maybe some beamforming, and maybe some longer A-MPDU
aggregates. I don't want to even think about MU-MIMO on 2GHz.
* Add an ifmedia placeholder type for VHT rates.
* Add channel flags for VHT, VHT20/40U/40D/80/80+80/160
* Add channel macros for the above
* Add ieee80211_channel fields for the VHT information and flags,
along with some padding (so this struct definitely grows.)
* Add a phy type flag for VHT - 'v'
* Bump the number of channels to a much higher amount - until we get
something like the linux mac80211 chanctx abstraction (where the
stack provides a current channel configuration via callbacks,
versus the driver ever checking ic->ic_curchan or similar) we'll
have to populate VHT+HT combinations.
Eg, there'll likely be a full set of duplicate VHT20/40 channels to match
HT channels. There will also be a full set of duplicate VHT80 channels -
note that for VHT80, its assumed you're doing VHT40 as a base, so we
don't need a duplicate of VHT80 + 20MHz only primary channels, only
a duplicate of all the VHT40 combinations.
I don't want to think about VHT80+80 or VHT160 for now - and I won't,
as the current device I'm doing 11ac bringup on (QCA9880) only does
VHT80.
I'll likely revisit the channel configuration and scanning related
stuff after I get VHT20/40 up.
* Add vht flags and the basic MCS rate setup to ieee80211com, ieee80211vap
and ieee80211_node in preparation for 11ac configuration.
There is zero code that uses this right now.
* Whilst here, add some more placeholders in case I need to extend
out things by some uint32_t flag sized fields. Hopefully I won't!
What I haven't yet done:
* any of the code that uses this
* any of the beamforming related fields
* any of the MU-MIMO fields required for STA/AP operation
* any of the IE fields in beacon frame / probe request/response handling
and the calculations required for shifting beacon contents around
when the TIM grows/shrinks
This will require a full rebuild of net80211 related programs -
ifconfig, hostapd, wpa_supplicant.
Since the previous algorithm, based on bit shifting, does not scale
with large replay windows, the algorithm used here is based on
RFC 6479: IPsec Anti-Replay Algorithm without Bit Shifting.
The replay window will be fast to be updated, but will cost as many bits
in RAM as its size.
The previous implementation did not provide a lock on the replay window,
which may lead to replay issues.
Reviewed by: ae
Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8468
- reset gen on down
- initialize admin task statically
- drain mp_ring on down
- don't drop context lock on stop
- reset error stats on down
- fix typo in min_latency sysctl
- return ENOBUFS from if_transmit if the driver isn't running or the link is down
Submitted by: mmacy@nextbsd.org
Reviewed by: shurd
MFC after: 2 days
Sponsored by: Isilon and Limelight Networks
Differential Revision: https://reviews.freebsd.org/D8558
Calling into an ifnet implementation with the if_addr_lock already
held can cause a LOR and potentially a deadlock, as ifnet
implementations typically can take the if_addr_lock after their
own locks during configuration. Refactor a sysctl handler that
was violating this to read if_counter data in a temporary buffer
before the if_addr_lock is taken, and then copying the data
in its final location later, when the if_addr_lock is held.
PR: 194109
Reported by: Jean-Sebastien Pedron
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8498
Reviewed by: sbruno
- use PCI_VENDOR and PCI_DEVICE ids from a publicly allocated range
(thanks to RedHat)
- export memory pool information through PCI registers
- improve mechanism for configuring passthrough on different hypervisors
Code is from Vincenzo Maffione as a follow up to his GSOC work.
Currently the network change is simulated by link status changes.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8295
These two ALU instructions first appeared on Linux. Then, libpcap adopted
and made them available since 1.6.2. Now more platforms including NetBSD
have them in kernel. So do we.
--이 줄 이하는 자동으로 제거됩니다--
The hashtype on an outgoing mbuf reflects the correct hash on the
transmit side of the connection. If this hash persists on loopback,
the receiving RSS/PCBGROUP code will use it to look up the pcbgroup
for the transmit side, which will often not match the pcbgroup for the
receive side of the connection. This leads to TCP connections
hanging, and dropping the SYN/ACK packet. This is essentially
the same as having a hardware network card generate mbufs with an
incorrect RSS hash.
There are a number of places which can set the hash on transmit,
so the simplest fix is to simply clear the hash at loopback time.
Clearing the hash allows a new, correct hash to be calculated in
software on the receive side.
Reviewed by: jtl
Discussed with: adrian
Sponsored by: Netflix
fix build on 32 bit platforms
simplify logic in netmap_virt.h
The commands (in net/netmap.h) to configure communication with the
hypervisor may be revised soon.
At the moment they are unused so this will not be a change of API.
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
So that everyone in this task have consistent view of link state.
Reviewed by: ae
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8214
The _correct_ way to identify the supported checksum offloading and
TSO parameters is to query OID_TCP_OFFLOAD_HARDWARE_CAPABILITIES.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8088
Since if_addrlist is used only for ipfilter(4), add a macro if_addrlist
in ip_compat.h.
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D8059
While here, prefer if_addrhead (FreeBSD) to if_addrlist (BSD compat) naming
for the interface address list in sctp_bsd_addr.c
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D8051
Fragmented UDP and ICMP packets were corrupted if a firewall with reassembling
feature (like pf'scrub) is enabled on the bridge. This patch fixes corrupted
packet problem and the panic (triggered easly with low RAM) as explain in PR
185633.
bridge_pfil and bridge_fragment relationship:
bridge_pfil() receive (IN direction) packets and sent it to the firewall The
firewall can be configured for reassembling fragmented packet (like pf'scrubing)
in one mbuf chain when bridge_pfil() need to send this reassembled packet to the
outgoing interface, it needs to re-fragment it by using bridge_fragment()
bridge_fragment() had to split this mbuf (using ip_fragment) first then
had to M_PREPEND each packet in the mbuf chain for adding Ethernet
header.
But M_PREPEND can sometime create a new mbuf on the begining of the mbuf chain,
then the "main" pointer of this mbuf chain should be updated and this case is
tottaly forgotten. The original bridge_fragment code (Revision 158140,
2006 April 29) came from OpenBSD, and the call to bridge_enqueue was
embedded. But on FreeBSD, bridge_enqueue() is done after bridge_fragment(),
then the original OpenBSD code can't work as-it of FreeBSD.
PR: 185633
Submitted by: Olivier Cochard-Labbé
Differential Revision: https://reviews.freebsd.org/D7780
They are defined by NDIS spec, so the NDIS prefix.
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7717
Actually all OIDs defined in net/rndis.h are standard NDIS OIDs.
While I'm here, use the verbose macro name as in NDIS spec.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7679
And use new RNDIS set to configure NDIS offloading parameters.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7641
