This method has been aligned with the way how the Rx queue size is being
updated - so it's now done synchronously instead of resetting the
device.
Moreover, the input parameter is now being validated if it's a power of
2. Without this, it can cause kernel panic.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This patch reworks how the Rx queue size is being reconfigured and how
the information from the device is being processed.
Reconfiguration of the queues and reset of the device in order to make
the changes alive isn't the best approach. It can be done synchronously
and it will let to pass information if the reconfiguration was
successful to the user. It now is done in the ena_update_queue_size()
function.
To avoid reallocation of the ring buffer, statistic counters and the
reinitialization of the mutexes when only new size has to be assigned,
the io queues initialization function has been split into 2 stages:
basic, which is just copying appropriate fields and the advanced, which
allocates and inits more advanced structures for the IO rings.
Moreover, now the max allowed Rx and Tx ring size is being kept
statically in the adapter and the size of the variables holding those
values has been changed to uint32_t everywhere.
Information about IO queues size is now being logged in the up routine
instead of the attach.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Tx drops statistics are fetched from HW every ena_keepalive_wd() call
and are observable using one of the commands:
* sysctl dev.ena.0.hw_stats.tx_drops
* netstat -I ena0 -d
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
* Removed adaptive interrupt moderation (not suported on FreeBSD).
* Use ena_com_free_q_entries instead of ena_com_free_desc.
* Don't use ENA_MEM_FREE outside of the ena_com.
* Don't use barriers before calling doorbells as it's already done in
the HAL.
* Add function that generates random RSS key, common for all driver's
interfaces.
* Change admin stats sysctls to U64.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Sometimes, especially when there is not much memory in the system left,
allocating mbuf jumbo clusters (like 9KB or 16KB) can take a lot of time
and it is not guaranteed that it'll succeed. In that situation, the
fallback will work, but if the refill needs to take a place for a lot of
descriptors at once, the time spent in m_getjcl looking for memory can
cause system unresponsiveness due to high priority of the Rx task. This
can also lead to driver reset, because Tx cleanup routine is being
blocked and timer service could detect that Tx packets aren't cleaned
up. The reset routine can further create another unresponsiveness - Rx
rings are being refilled there, so m_getjcl will again burn the CPU.
This was causing NVMe driver timeouts and resets, because network driver
is having higher priority.
Instead of 16KB jumbo clusters for the Rx buffers, 9KB clusters are
enough - ENA MTU is being set to 9K anyway, so it's very unlikely that
more space than 9KB will be needed.
However, 9KB jumbo clusters can still cause issues, so by default the
page size mbuf cluster will be used for the Rx descriptors. This can have a
small (~2%) impact on the throughput of the device, so to restore
original behavior, one must change sysctl "hw.ena.enable_9k_mbufs" to
"1" in "/boot/loader.conf" file.
As a part of this patch (important fix), the version of the driver
was updated to v2.1.2.
Submitted by: cperciva
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: Ido Segev <idose@amazon.com>
Reviewed by: Guy Tzalik <gtzalik@amazon.com>
MFC after: 3 days
PR: 225791, 234838, 235856, 236989, 243531
Differential Revision: https://reviews.freebsd.org/D24546
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
ENAv2 introduces many new features, bug fixes and improvements.
Main new features are LLQ (Low Latency Queues) and independent queues
reconfiguration using sysctl commands.
The year in copyright notice was updated to 2019.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA can have multiple states turned on/off, it is more convenient
to store them in single bitfield instead of multiple boolean variables.
The bitset FreeBSD API was used for the bitfield implementation, as it
provides flexible structure together with API which also supports atomic
bitfield operations.
For better readability basic macros from API were wrapped into custom
ENA_FLAG_* macros, which are filling up common parameters for all calls.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
LLQ (Low Latency Queue) is the feature, that allows pushing header
directly to the device through PCI before even DMA is triggered.
It reduces latency, because device can start preparing packet before
payload is sent through DMA.
To speed up sending data through PCI, the Write Combining is enabled,
which allows hardware to buffer data before sending them on the PCI - it
allows to reduce number of PCI IO operations.
ENAv2 is using special descriptor for the negotiation of the LLQ.
Currently, only the default configuration is supported.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Handle IO interrupts using filter routine. That way, the main cleanup
task could be moved to the separate thread using taskqueue.
The deferred Rx cleanup task was removed, and now the cleanup task is
begin called instead. That way, the Rx lock could be removed.
In addition, Queue management (wake up and stop TX ring) was added, so
the TX cleanup task can be performed mostly lockless.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The driver now supports per adapter tuning of buffer ring size and HW Rx
ring size.
It can be achieved using sysctl node dev.ena.X.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Using only 1 descriptor on RX could be an issue, if system would be low
on resources and could not provide driver with large chunks of
contiguous memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12871
Few counters were imported from the Linux driver and never used,
because of differences between the Linux and FreeBSD APIs.
Queue stops and resumes are no longer supported by the driver and
counters were incremented indicating false events.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12862
* Change all conditional checks in "if" statement to boolean expressions
* Initialize variables with too complex values outside the declaration
* Fix indentations
* Move code associated with sysctls to ena_sysctl.c file
* For consistency, remove unnecesary "return" from void functions
* Use if_getdrvflags() function instead of accesing variable directly
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12860
In case when Rx ring is full and driver will fail to allocate Rx mbufs,
the ring could be stalled.
Keep alive is checking every second for Rx ring state, and if it is full
for two cycles, then trigger rx_cleanup routine in another thread.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12856
The RX out of order completion feature, allows to complete RX
descriptors out of order, by keeping trace of all free descriptors in
the separate array.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12855
Do not read all statistics from the device, instead count them in the
driver except from RX drops - they are received directly from the NIC
in the AENQ descriptor.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12852
The newest ena-com HAL supports LLQv2 and introduces
API changes. In order not to break the driver compilation
it was updated/fixed in a following way:
* Change version of the driver to 0.8.0
* Provide reset cause when triggering reset of the device
* Reset device after attach fails
* In the reset task free management irq after calling ena_down. Admin
queue can still be used before ena_down is called, or when it is
being handled
* Do not reset device if ena_reset_task fails
* Move call of the ena_com_dev_reset to the ena_down() routine - it
should be called only if interface was up
* Use different function for checking empty space on the sq ring
(ena-com API change)
* Fix typo on ENA_TX_CLEANUP_THRESHOLD
* Change checking for EPERM with EOPNOTSUPP - change in the ena-com API
* Minor style fixes
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Amazon.com, Inc.
Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12143
Collapse should be more effective than defragmentation.
Added missing declaration of ena_check_and_collapse_mbuf().
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
When mbuf chain is too long and device cannot handle that number
of segments in DMA transaction, mbuf chain will be defragmented.
Initially, driver was dropping all mbuf chains that were exceeding
supported number of segments.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10923
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
