Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
o move it from subr_bus.c to netisr.c where it more properly belongs
o add NET_PICKUP_GIANT and NET_DROP_GIANT macros that will be used to
grab Giant as needed when MPSAFE operation is enabled
Supported by: FreeBSD Foundation
classes and if a method is not found in a given class, its base classes
are searched (in the order they were declared). This search is recursive,
i.e. a method may be define in a base class of a base class.
* Change the kobj method lookup algorithm to one which is SMP-safe. This
relies only on the constraint that an observer of a sequence of writes
of pointer-sized values will see exactly one of those values, not a
mixture of two or more values. This assumption holds for all processors
which FreeBSD supports.
* Add locking to kobj class initialisation.
* Add a simpler form of 'inheritance' for devclasses. Each devclass can
have a parent devclass. Searches for drivers continue up the chain of
devclasses until either a matching driver is found or a devclass is
reached which has no parent. This can allow, for instance, pci drivers
to match cardbus devices (assuming that cardbus declares pci as its
parent devclass).
* Increment __FreeBSD_version.
This preserves the driver API entirely except for one minor feature used
by the ISA compatibility shims. A workaround for ISA compatibility will
be committed separately. The kobj and newbus ABI has changed - all modules
must be recompiled.
accesses softc after it is freed. Use a different malloc type for
softc than the rest of the bus code to make it more clear when these
things happen that it is the driver that's at fault, not the bus code.
Suggested by: sam and/or phk (I think)
about interrupt trigger mode and interrupt polarity. This allows ACPI
for example to pass interrupt resource information up the hierarchy.
The default implementation of the method therefore is to pass the
request to the parent.
Reviewed by: jhb, njl
and/or INTR_FAST. This belongs elsehwere and perhaps under bootverbose;
I'm committing it for now as it's uesful to know which drivers have
been converted and which have not.
the poll bits when there's actually something in the queue.
Otherwise, select always returned '2' when there were no items to be
read, and '3' when there were. This would preclude being able to read
in a threaded (libc_r) program, as well as checking to see if there
were pending events or not.
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
1) Record all device events when devctl is enabled, rather than just when
devd has devctl open. This is necessary to prevent races between when
a device arrives, and when devd starts.
2) Add hw.bus.devctl_disable to disable devctl, this can also be set as a
tunable.
3) Fix async support. Reset nonblocking and async_td in open. remove
async flags.
4) Free all memory when devctl is disabled.
Approved by: re (blanket)
Ignoring a NULL dev in device_set_ivars() sounds wrong, KASSERT it to
non-NULL instead.
Do the same for device_get_ivars() for reasons of symmetry, though
it probably would have yielded a panic anyway, this gives more precise
diagnostics.
Absentmindedly nodded OK to by: jhb
configuration device hierarchy. Device arrival, departure and not
matched are presently reported. This will be the basis for devd, which
I still need to polish a little more before I commit it. If you don't
use /dev/devctl, it will be a noop.
o Allow the bus_debug variable to be set via the bus.debug tunable.
o Return pnpinfo and location info via the devinfo interface to userland.
devinfo(8) needs to be updated to print it.
Don't use snprintf where strlcpy() will do the job.
Also, a NUL is '\0' not 0 in our style (C doesn't care), so spell it like.
Remove useless {} and () in the general area of this change.
device_t the same throughout kernel.
This is a very fine point of C which fortunatly does not make any
difference in normal circumstances but which due to the pervasiveness
of device_t in the kernel can make a lint barf a lot.
functions. We add pnpinfo, locationinfo, devflags (the newbus flags
on the device), flags (the flags that device_get_flags returns) and
state to the list of things we return.
pnpinfo and locationinfo are place holders at the moment that will be
filled in by the device's parent (optionally). Userland programs will
likely use this information from time to time and take appropriate
actions.
Improvements to devinfo to follow.
and a generic resource_list_print_type() function to print all resouces
of a certain type in a resource list.
Use ulmin()/ulmax() instead of min()/max() in two places to handle
u_longs correctly.
number) instead of allocating next free unit for them. If someone needs
fixed place, he must specify it correctly. "Allocating next" is especially bad
because leads to double device detection and to "repeat make_dev panic" as
result. This can happens if the same devices present somewhere on PCI bus,
hints and ACPI. Making them present in one place only not always
possible, "sc" f.e. can't be removed from hints, it results to no console at
all.
2) In make_device(), detect when devclass_add_device() fails, free dev and
return. I.e. add missing error checking. This part needed to finish fix in 1),
but must be done this way in anycase, with old variant too.
support. Trying to fix the merged set where dynamic overrode
static was getting more and more complicated by the day.
This should fix the duplicate atkbd, psm, fd* etc in GENERIC. (which
paniced the alpha, but not the i386)
- Replace some very poorly thought out API hacks that should have been
fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
inconvenient temporary ioconf table from config(). We already had a
fallback to using strings before malloc/vm was running anyway.
o Use 8 space hard tabs
o Eliminate trailing white space (while I'm here, just in a couple of places)
o wrap mostly at 80 columns (printf literal strings being the notable
exception)
o use return (foo) consistantly
o use 0 vs NULL more consistantly
o use queue(3) xxx_FOREACH macros where appropriate (some places used it
before, others didn't).
o use BSD line continuation parameters
Pendants will likely notice minor style(9) violations, but for the
most part the file now looks much much closer to style(9) and is
mostly self-consistant.
Approved in principle by: dfr
Reviewed by: md5 (no changes to the .o)
Alter consumers of this method to conform to the new convention.
Minor cosmetic adjustments to bus.h.
This isn't of concern as this interface isn't in use yet.
macros which provide the same functionality and are a bit more
efficient, convert use of CIRCLEQ's in resource manager to TAILQ's.
Approved by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
device tree and resource manager contents. This is the kernel side of
the upcoming libdevinfo, which will expose this information to userspace
applications in a trivial fashion.
Remove the now-obsolete DEVICE_SYSCTLS code.
implementation.
Add bus_generic_rl_{get,set,delete,release,alloc}_resource() functions
which provide generic operations for devices using resource list style
resource management.
This should simplify a number of bus drivers. Further commits to follow.
then treat it as such. This isn't perfect, but should do for things
like GENERIC. When in fallback mode, they will be used if there are NO
other hints.
interfaces. The original resource_find() returned a pointer to an internal
resource table entry. resource_find_hard() dereferences the actual
passed in value (oops!) - effectively trashing random memory due to
the pointer being passed in with a random initial value.
Submitted by: bde
Use strtoul(), not strtol() in the hints decoder so that
'flags 0xa0ffa0ff' is not truncated to 0x7fffffff.
Use a stack buffer instead of a static 100 byte bss buffer.
Use \0 for the NUL character.
Remove some ``excessive'' parens.
dynamic hints. This allows the resource_XXX_value() calls to work
before malloc() has started. This gets the serial console working as well
as a few other things.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
required (rounded up a little) instead of twice the previous amount (or
a fixed amount for the first allocation).
The bug caused memory corruption when a new unit number for a devclass
was more than about twice the previous maximum one (or more than 3 for
the first one), so it corrupted memory (which happened to be the atkbdc
port resource list) in the reporter's configuration with sio unit
numbers { 0, 25, 1, 2, ... }.
Reviewed by: dfr
Reported by: Leonid Lukiyanets <stalwar78@hotmail.com>
buzy, only search upwards for a free slot to use..
This broke unit numbering on ATA systems where PCI attached controllers
come before the mainboard ones...
Reviewed by: dfr
is used to control whether the debug messages are output at runtime.
It defaults to on so that if you define BUS_DEBUG in your kernel
then you get all the debugging info when you boot.
It's very useful for disabling all the debugging info when you're
developing a loadable device driver and you're doing lots of loads
and unloads but don't always want to see all the debugging info.
bus/driver/kobj system. I am not 100% sure that this is the correct fix,
but it is harmless and does seem to solve the problem. At worst, it could
cause a tiny memory leak at unload time - this is better than a free(NULL)
and subsequent panic. I'm waiting for comments from Doug about this.
This may yet be backed out and fixed differently.
The change itself is to increment the reference count on drivers in one
case where it appears to have been missed. When everything is unloaded,
kobj_class_free() was being called twice in some cases, and panicing the
second time.
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
takes about 40ns for a method dispatch on a 300Mhz PII which is only
10ns slower than a direct function call on the same hardware.
This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
release for inclusion into the release, but bde talked me out of
committing the module that needs this until after the release. It is
after the release now. :-)
This avoids the unit number from going up indefinitely when
diconnecting and connecting 2 devices alternately.
Noticed by: nsayer (quite a while ago)
And stop calling DEVICE_NOMATCH at probe repeatedly. This stops the
message on the PCI VGA board from being printed when loading a PCI driver.
This unspams the boot messages, concentrating on the drivers that have
actually been probed.
This basically resurrects revision 1.106 from old /sys/i386/isa/isa.c.
Reviewed by: jkh, dfr
device_add_child_ordered(). 'ivars' may now be set using the
device_set_ivars() function.
This makes it easier for us to change how arbitrary data structures are
associated with a device_t. Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.
Despite my best efforts I've probably forgotten something so let me know
if this breaks anything. I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.
Reviewed by: peter, dfr
