Use AUXARGS_ENTRY_PTR to export these pointers. This is a followup to
r359987 and r359988.
Reviewed by: jhb
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24446
This simplifies discovery of these values, potentially with reducing the
number of syscalls we need to make at runtime. Longer term, we wish to
convert the startup process to pass an auxargs pointer to _start() and
use that rather than walking off the end of envv. This is cleaner,
more C-friendly, and for systems with strong bounds (e.g. CHERI)
necessary.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
There's no point in pre-checking that we can access the user's rmtp
pointer before we do it in copyout().
While here, improve style(9) compliance.
Reviewed by: imp
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24409
Copy the CP, PTRIN, etc macros from freebsd32.h into a sys/abi_compat.h
and replace existing definitation with includes where required. This
eliminates duplicate code and allows Linux and FreeBSD compatability
headers to be included in the same files.
Input from: cem, jhb
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24275
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
close_range(min, max, flags) allows for a range of descriptors to be
closed. The Python folk have indicated that they would much prefer this
interface to closefrom(2), as the case may be that they/someone have special
fds dup'd to higher in the range and they can't necessarily closefrom(min)
because they don't want to hit the upper range, but relocating them to lower
isn't necessarily feasible.
sys_closefrom has been rewritten to use kern_close_range() using ~0U to
indicate closing to the end of the range. This was chosen rather than
requiring callers of kern_close_range() to hold FILEDESC_SLOCK across the
call to kern_close_range for simplicity.
The flags argument of close_range(2) is currently unused, so any flags set
is currently EINVAL. It was added to the interface in Linux so that future
flags could be added for, e.g., "halt on first error" and things of this
nature.
This patch is based on a syscall of the same design that is expected to be
merged into Linux.
Reviewed by: kib, markj, vangyzen (all slightly earlier revisions)
Differential Revision: https://reviews.freebsd.org/D21627
realpath(3) is used a lot e.g., by clang and is a major source of getcwd
and fstatat calls. This can be done more efficiently in the kernel.
This works by performing a regular lookup while saving the name and found
parent directory. If the terminal vnode is a directory we can resolve it using
usual means. Otherwise we can use the name saved by lookup and resolve the
parent.
See the review for sample syscall counts.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23574
A new syscall sigfastblock(2) is added which registers a uint32_t
variable as containing the count of blocks for signal delivery. Its
content is read by kernel on each syscall entry and on AST processing,
non-zero count of blocks is interpreted same as the signal mask
blocking all signals.
The biggest downside of the feature that I see is that memory
corruption that affects the registered fast sigblock location, would
cause quite strange application misbehavior. For instance, the process
would be immune to ^C (but killable by SIGKILL).
With consumers (rtld and libthr added), benchmarks do not show a
slow-down of the syscalls in micro-measurements, and macro benchmarks
like buildworld do not demonstrate a difference. Part of the reason is
that buildworld time is dominated by compiler, and clang already links
to libthr. On the other hand, small utilities typically used by shell
scripts have the total number of syscalls cut by half.
The syscall is not exported from the stable libc version namespace on
purpose. It is intended to be used only by our C runtime
implementation internals.
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
r355473 vastly improved the readability and cleanliness of these Makefiles.
Every single one of them follows the same pattern and duplicates the exact
same logic.
Now that we have GENERATED/SRCS, split SRCS up into the two parameters we'll
use for ${MAKESYSCALLS} rather than assuming a specific ordering of SRCS and
include a common sysent.mk to handle the rest. This makes it less tedious to
make sweeping changes.
Some default values are provided for GENERATED/SYSENT_*; almost all of these
just use a 'syscalls.master' and 'syscalls.conf' in cwd, and they all use
effectively the same filenames with an arbitrary prefix. Most ABIs will be
able to get away with just setting GENERATED_PREFIX and including
^/sys/conf/sysent.mk, while others only need light additions. kern/Makefile
is the notable exception, as it doesn't take a SYSENT_CONF and the generated
files are spread out between ^/sys/kern and ^/sys/sys, but it otherwise fits
the pattern enough to use the common version.
Reviewed by: brooks, imp
Nice!: emaste
Differential Revision: https://reviews.freebsd.org/D23197
When either makesyscalls.lua or syscalls.master changes, all of the
${GENERATED} targets are now out-of-date. With make jobs > 1, this means we
will run the makesyscalls script in parallel for the same ABI, generating
the same set of output files.
Prior to r356603 , there is a large window for interlacing output for some
of the generated files that we were generating in-place rather than staging
in a temp dir. After that, we still should't need to run the script more
than once per-ABI as the first invocation should update all of them. Add
.ORDER to do so cleanly.
Reviewed by: brooks
Discussed with: sjg
Differential Revision: https://reviews.freebsd.org/D23099
Partially revert r354741 and r354754 and go back to allocating a
fixed-size chunk of stack space for the auxiliary vector. Keep
sv_copyout_auxargs but change it to accept the address at the end of
the environment vector as an input stack address and no longer
allocate room on the stack. It is now called at the end of
copyout_strings after the argv and environment vectors have been
copied out.
This should fix a regression in r354754 that broke the stack alignment
for newer Linux amd64 binaries (and probably broke Linux arm64 as
well).
Reviewed by: kib
Tested on: amd64 (native, linux64 (only linux-base-c7), and i386)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22695
Use the power of variable to avoid spelling out source and generated
files too many times. The previous Makefiles were hard to read, hard to
edit, and badly formatted.
Reviewed by: kevans, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22714
- Use ustringp for the location of the argv and environment strings
and allow destp to travel further down the stack for the stackgap
and auxv regions.
- Update the Linux copyout_strings variants to move destp down the
stack as was done for the native ABIs in r263349.
- Stop allocating a space for a stack gap in the Linux ABIs. This
used to hold translated system call arguments, but hasn't been used
since r159992.
Reviewed by: kib
Tested on: md64 (amd64, i386, linux64), i386 (i386, linux)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22501
The lua-based makesyscalls produces slightly different output than its
makesyscalls.sh predecessor, all whitespace differences more closely
matching the source syscalls.master.
flua is bootstrapped as part of the build for those on older
versions/revisions that don't yet have flua installed. Once upgraded past
r354833, "make sysent" will again naturally work as expected.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21894
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
Change the FreeBSD ELF ABIs to use this new hook to copyout ELF auxv
instead of doing it in the sv_fixup hook. In particular, this new
hook allows the stack space to be allocated at the same time the auxv
values are copied out to userland. This allows us to avoid wasting
space for unused auxv entries as well as not having to recalculate
where the auxv vector is by walking back up over the argv and
environment vectors.
Reviewed by: brooks, emaste
Tested on: amd64 (amd64 and i386 binaries), i386, mips, mips64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22355
Pointer arguments should be of the form "<type> *..." and not "<type>* ...".
No functional change.
Reviewed by: kevans
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22373
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
shm_open2 allows a little more flexibility than the original shm_open.
shm_open2 doesn't enforce CLOEXEC on its callers, and it has a separate
shmflag argument that can be expanded later. Currently the only shmflag is
to allow file sealing on the returned fd.
shm_open and memfd_create will both be implemented in libc to use this new
syscall.
__FreeBSD_version is bumped to indicate the presence.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21393
It allows a process to request that stack gap was not applied to its
stacks, retroactively. Also it is possible to control the gaps in the
process after exec.
PR: 239894
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21352
Previously userspace would issue one syscall to resolve the sysctl and then
another one to actually use it. Do it all in one trip.
Fallback is provided in case newer libc happens to be running on an older
kernel.
Submitted by: Pawel Biernacki
Reported by: kib, brooks
Differential Revision: https://reviews.freebsd.org/D17282
This effectively makes the stack base on the csu _start entry
randomized.
The gap is enabled if ASLR is for the ABI is enabled, and then
kern.elf{64,32}.aslr.stack_gap specify the max percentage of the
initial stack size that can be wasted for gap. Setting it to zero
disables the gap, and max is capped at 50%.
Only amd64 for now.
Reviewed by: cem, markj
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21081
feature bit.
In particular, allocate the bit to opt-out the image from implicit
PROTMAX enablement. Provide procctl(2) verbs to set and query
implicit PROTMAX handling. The knobs mimic the same per-image flag
and per-process controls for ASLR.
Reviewed by: emaste, markj (previous version)
Discussed with: brooks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D20795
syscalls.conf is included using "." which per the Open Group:
If file does not contain a <slash>, the shell shall use the search
path specified by PATH to find the directory containing file.
POSIX shells don't fall back to the current working directory.
Submitted by: Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20476
r176215 corrected readlink(2)'s return type and the type of the last
argument. readlink(2) was introduced in r177788 after being developed
as part of Google Summer of Code 2007; it appears to have inherited the
wrong return type.
Man pages and header files were already ssize_t; update syscalls.master
to match.
PR: 197915
Submitted by: Henning Petersen <henning.petersen@t-online.de>
MFC after: 2 weeks
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
Each control message region must be aligned on a 4-byte boundary on 32-bit
architectures. The 32-bit compat shim for recvmsg() gets the actual layout
right, but doesn't pad the payload length when computing msg_controllen for
the output message header. If a control message contains an unaligned
payload, such as the 1-byte TTL field in the example attached to PR 236737,
this can produce control message payload boundaries that extend beyond
the boundary reported by msg_controllen.
PR: 236737
Reported by: Yuval Pavel Zholkover <paulzhol@gmail.com>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19768
