Commit Graph

64 Commits

Author SHA1 Message Date
Michael Tuexen
fd60718d17 Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order
sysctl's, since they where only there to interop with non-conformant
implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
Michael Tuexen
d88a626a1d Enable SACK Immediately per default.
This has been tested for a long time and implements covered by RFC 7053.

MFC after: 1 week
2016-05-12 15:48:08 +00:00
Randall Stewart
9d18771f69 A couple of minor changes that I missed that Michael had done, most noted
in these is the change to non-strict ordering for incoming data (this will
make pkt-drill test 14 fail but its expected).
2016-04-07 09:34:41 +00:00
Randall Stewart
44249214d3 This is work done by Michael Tuexen and myself at the IETF. This
adds the new I-Data (Interleaved Data) message. This allows a user
to be able to have complete freedom from Head Of Line blocking that
was previously there due to the in-ability to send multiple large
messages without the TSN's being in sequence. The code as been
tested with Michaels various packet drill scripts as well as
inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
Brad Davis
e5fe11011a Remove redundant 'man page'
Reviewed by:	allanjude
2015-09-15 21:16:45 +00:00
Allan Jude
32d321fa4a missed file that should have been included in r287528
PR:		184110
Submitted by:	Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Approved by:	wblock (mentor)
2015-09-07 02:00:05 +00:00
Michael Tuexen
2e2d67945a Use 5 times RTO.Max as the default for the shutdown guard timer
as required by RFC 4960. The sysctl variable can be used to
overwrite this.

Discussed with:	rrs
MFC after:	1 week
2015-08-29 17:26:29 +00:00
Michael Tuexen
f47f328dc5 Fix the handling of sysctl variables when used with VIMAGE.
While there do some cleanup of the code.

MFC after: 1 week
2014-09-06 19:12:14 +00:00
Michael Tuexen
97a0ca5b3e Change SCTP sysctl from auth_disable to auth_enable. This is
consistent with other similar sysctl variable used in SCTP.
2014-08-12 13:13:11 +00:00
Michael Tuexen
c79bec9c75 Add support for the SCTP_AUTH_SUPPORTED and SCTP_ASCONF_SUPPORTED
socket options. Add also a sysctl to control the support of ASCONF.

MFC after: 1 week
2014-08-12 11:30:16 +00:00
Michael Tuexen
317e00ef86 Add support for the SCTP_RECONFIG_SUPPORTED and the corresponding
sysctl controlling the negotiation of the RE-CONFIG extension.

MFC after: 3 days
2014-08-04 20:07:35 +00:00
Michael Tuexen
cb9b8e6f7d Add support for the SCTP_PKTDROP_SUPPORTED socket option and
the corresponding sysctl variable.
The default is off, since the specification is not an RFC yet.

MFC after: 1 week
2014-08-03 18:12:55 +00:00
Michael Tuexen
caea98793f Add SCTP socket option SCTP_NRSACK_SUPPORTED to control the
NRSACK extension. The default will still be off, since it
it not an RFC (yet).
Changing the sysctl name will be in a separate commit.

MFC after: 1 week
2014-08-03 14:10:10 +00:00
Michael Tuexen
dd973b0e15 Add support for the SCTP_PR_SUPPORTED socket option as specified in
http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies
Add also a sysctl controlling the default of the end-points.

MFC after: 1 week
2014-08-02 21:36:40 +00:00
Michael Tuexen
47aac6fa4b Remove the asconf_auth_nochk sysctl. This was off by default and only
existed to be able to test with non-compliant peers a long time ago.
2014-08-01 20:49:27 +00:00
Michael Tuexen
fe96e2852e Use SCTP_OVER_UDP_TUNNELING_PORT more consistently.
MFC after: 3 days
2014-03-29 20:21:36 +00:00
Michael Tuexen
ff1ffd7499 * Provide information in error causes in ASCII instead of
proprietary binary format.
* Add support for a diagnostic information error cause.
  The code is sysctlable and the default is 0, which
  means it is not sent.

This is joint work with rrs@.

MFC after: 1 week
2014-03-16 12:32:16 +00:00
Michael Tuexen
ee1ccd9258 Fix a bug were only 2048 streams where usable even though more than
2048 streams were negotiated on the wire. While there, remove the
hard coded limit of 2048 streams.

MFC after: 3 days
2013-07-05 10:08:49 +00:00
Michael Tuexen
39803b8c58 Whitespace cleanup.
MFC after: 3 days
2012-06-25 17:15:09 +00:00
Michael Tuexen
8d9638ab33 Get rid of SCTP specific code to avoid CRC32C computations on loopback.
Just just offloading.
MFC after: 3 days
2012-05-26 09:16:33 +00:00
Michael Tuexen
807aad636f Use consistent text at the begining of the files.
MFC after: 3 days
2012-05-23 11:26:28 +00:00
Michael Tuexen
635b6ff793 Use a default for max_burst of 4 and l2var of 2.
This was discussed with rrs@.

MFC after: 3 days
2012-05-17 18:12:24 +00:00
Michael Tuexen
c58e60be43 Add an SCTP sysctl "blackhole", similar to the one for TCP.
If set to 1, no ABORT is sent back in response to an incoming
INIT. If set to 2, no ABORT is sent back in response to
an out of the blue packet. If set to 0 (the default), ABORTs
are sent.
Discussed with rrs@.

MFC after: 1 month.
2012-01-08 09:56:24 +00:00
Michael Tuexen
ab6174d587 Retire the SCTP sysctl "strict_init". We always perform the validation
and there is no reason to make is configuarable.
Discussed with rrs@.
2012-01-07 14:04:00 +00:00
Michael Tuexen
7215cc1b74 Fix unused parameter warnings.
While there, fix some whitespace issues.

MFC after: 3 months.
2011-12-17 19:21:40 +00:00
Michael Tuexen
c9c5805975 Add support for the SCTP_REMOTE_UDP_ENCAPS_PORT socket option.
Retire the the now unused sctp_udp_tunneling_for_client_enable
sysctl variable.

MFC after: 3 months.
2011-11-20 15:00:45 +00:00
Michael Tuexen
ca85e9482a The result of a joint work between rrs@ and myself at the IETF:
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.

Approved by: re@
MFC after: 2 months.
2011-08-03 20:21:00 +00:00
Michael Tuexen
c3d72c80d3 Implement Resource Pooling V2 and an MPTCP like congestion
control.
Based on a patch received from Martin Becke.

MFC after: 2 weeks.
2011-05-04 21:27:05 +00:00
Randall Stewart
f79aab1866 Tunes and fixes the new DC-CC to seem to hit the
right mix.  Still may need some tweaks but it
appears to almost not give away too much to an
RFC2581 flow, but can really minimize the amount of
buffers used in the net.

MFC after:	3 months
2011-03-08 11:58:25 +00:00
Randall Stewart
48b6c64938 Adds a new Congestion Control that helps reduce
the RTT that a flow will build up in buffers in
transit. It is a slight modification to RFC2581
but is more friendly i.e. less aggressive.

MFC after:	3 months
2011-03-01 00:37:46 +00:00
Randall Stewart
299108c5a2 Improvements to CC modules:
1) Add four new points that allow you to get more information
   to cc algo's
2) Fix the case where user changes module on a existing TCB, in
   such a case, the initialization module needs to be called on all nets.
3) Move htcp_cc structure to a union that other modules can use.
4) Add 5th point for get/set socket options for cc_module specific options

MFC after:	2 months
2011-02-26 15:23:46 +00:00
Randall Stewart
5d40cf5d23 1) Typo correction in comments and one spacing change.
2) Mass update to all copyrights.
MFC after:	3 Months
2011-02-05 12:12:51 +00:00
Rebecca Cran
492fddb2c4 Fix typo (Tuneable -> Tunable). 2011-02-04 12:03:48 +00:00
Randall Stewart
899288ae4b 1) Allow a chunk to track the cwnd it was at when sent.
2) Add separate max-bursts for retransmit and hb. These
   are set to sysctlable values but not settable via the
   socket api. This makes sure we don't blast out HB's or
   fast-retransmits.
3) Determine on the first data transmission on a net if
   its local-lan (by being under or over a RTT). This
   can later be used to think about different algorithms
   based on locallan vs big-i (experimental)
4) The cwnd should NOT be allowed to grow when an ECNEcho
   is seen (TCP has this same bug). We fix this in SCTP
   so an ECNe being seen prevents an advance of cwnd.
5) CWR's should not be sent multiple times to the
   same network, instead just updating the TSN being
   transmitted if needed.

MFC after:	1 Month
2011-02-02 11:13:23 +00:00
Randall Stewart
493d8e5a83 More ECN fixes:
1) We now remove ECN-Nonce since it will no longer continue as a I-D
2) Eliminate last_tsn_echo, this tied us to an assoc not the net
   and thus we were not doing m-homing on the ECN-Echo senders side right.
3) Increment the count going out even if the TSN in lower in the pending
   ECN-Echo, this way the receiver knows exactly how many packets were
   marked even with network re-ordering
4) Fix so we DO NOT stop doing delayed sack if a ECN Echo is in queue
MFC after:	1 month
2011-01-31 11:50:11 +00:00
Michael Tuexen
90fed1d88e Change infrastructure for SCTP_MAX_BURST to allow compliance
with the latest socket API ID. Especially it can be disabled.

Full compliance needs changing the structure used in the
socket option. Since this breaks the API, it will be a
seperate commit which will not be MFCed to stable/8.

MFC after: 3 months.
2011-01-26 19:49:03 +00:00
Michael Tuexen
f7a77f6fd3 Add stream scheduling support.
This work is based on a patch received from Robin Seggelmann.

MFC after: 3 months.
2011-01-23 19:36:28 +00:00
Michael Tuexen
060bd88290 Provide a possibility to configure the inital congestion window to the
value defined in RFC 4960.

MFC after: 3 months.
2010-12-22 19:04:14 +00:00
Michael Tuexen
7c99d56fdf Improve plausibility check in sctp_handle_sack().
Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP).

MFC after: 3 months.
2010-12-22 17:59:38 +00:00
Michael Tuexen
231b700b17 Allow the initial congestion window to be configure
to one MTU. Improve the description.

MFC after: 2 weeks.
2010-09-19 11:57:21 +00:00
Michael Tuexen
dcfc062535 Make the initial congestion window configurable via sysctl.
MFC after: 2 weeks.
2010-09-17 18:53:07 +00:00
Michael Tuexen
25a2a18706 * Implement initial version of send buffer splitting.
* Make send/recv buffer splitting switchable via sysctl.
* While there: Fix some comments.
2010-09-17 16:20:29 +00:00
Michael Tuexen
9c7635e18b Fix the the SCTP_WITH_NO_CSUM option when used in combination with
interface supporting CRC offload. While at it, make use of the
feature that the loopback interface provides CRC offloading.

MFC after: 4 weeks
2010-08-29 18:50:30 +00:00
Michael Tuexen
bf3d517756 Fix a bug where wrong initialization value
in used for an SCTP specific sysctl variable.

Approved by: re, rrs(mentor).
MFC after: 2 weeks.
2009-07-28 15:07:41 +00:00
Randall Stewart
a16ccdcead Adds missing sysctl to manage the vtag_time_wait time. This will
even allow disabling time-wait all together if you set the value
to 0 (not advisable actually). The default remains the same
i.e. 60 seconds.
2009-05-30 11:14:41 +00:00
Randall Stewart
8933fa13b6 Many bug fixes (from the IETF hack-fest):
- PR-SCTP had major issues when skipping through a multi-part message.
  o Did not look at socket buffer.
  o Did not properly handle the reassmebly queue.
  o The MARKED segments could interfere and un-skip a chunk causing
    a problem with the proper FWD-TSN.
  o No FR of FWD-TSN's was being done.
- NR-Sack code was basically disabled. It needed fixes that
  never got into the real code.
- CMT code had issues when the two paths were NOT the same b/w. We
  found a few small bugs, but also the critcal one here was not
  dividing the rwnd amongst the paths.

Obtained from:	Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
Randall Stewart
830d754d52 Code from the hack-session known as the IETF (and a
bit of debugging afterwards):
- Fix protection code for notification generation.
- Decouple associd from vtag
- Allow vtags to have less strigent requirements in non-uniqueness.
   o don't pre-hash them when you issue one in a cookie.
   o Allow duplicates and use addresses and ports to
     discriminate amongst the duplicates during lookup.
- Add support for the NAT draft draft-ietf-behave-sctpnat-00, this
  is still experimental and needs more extensive testing with the
  Jason Butt ipfw changes.
- Support for the SENDER_DRY event to get DTLS in OpenSSL working
  with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon).
- Update the support of SCTP-AUTH by Peter Lei.
- Use macros for refcounting.
- Fix MTU for UDP encapsulation.
- Fix reporting back of unsent data.
- Update assoc send counter handling to be consistent with endpoint sent counter.
- Fix a bug in PR-SCTP.
- Fix so we only send another FWD-TSN when a SACK arrives IF and only
  if the adv-peer-ack point progressed. However we still make sure
  a timer is running if we do have an adv_peer_ack point.
- Fix PR-SCTP bug where chunks were retransmitted if they are sent
  unreliable but not abandoned yet.

With the help of:	Michael Teuxen and Peter Lei :-)
MFC after:	 4 weeks
2008-12-06 13:19:54 +00:00
Randall Stewart
df6e0cc37d - Make strict-sacks be the default.
- Change it so that without INVARIANTs there are
  no panics in SCTP.
- sctp_timer changes so that we have a recovery mechanism
  when the sent list is out of order.
2008-08-28 09:44:07 +00:00
Randall Stewart
fc14de76f4 1) Adds the rest of the VIMAGE change macros
2) Adds some __UserSpace__ on some of the common defines that
   the user space code needs
3) Fixes a bug when we send up data to a user that failed. We
   need to a) trim off the data chunk headers, if present, and
   b) make sure the frag bit is communicated properly for the
   msgs coming off the stream queues... i.e. we see if some
   of the msg has been taken.

Obtained from:	jeli contributed the VIMAGE changes on this pass Thanks Julain!
2008-07-09 16:45:30 +00:00
Randall Stewart
b3f1ea41fd - Macro-izes the packed declaration in all headers.
- Vimage prep - these are major restructures to move
  all global variables to be accessed via a macro or two.
  The variables all go into a single structure.
- Asconf address addition tweaks (add_or_del Interfaces)
- Fix rwnd calcualtion to be more conservative.
- Support SACK_IMMEDIATE flag to skip delayed sack
  by demand of peer.
- Comment updates in the sack mapping calculations
- Invarients panic added.
- Pre-support for UDP tunneling (we can do this on
  MAC but will need added support from UDP to
  get a "pipe" of UDP packets in.
- clear trace buffer sysctl added when local tracing on.

Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00