things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
required for options DEVICE_POLLING.
De-fragment the NETISR_ constant space and lower NETISR_MAXPROT from
32 to 16 -- when sizing queue arrays using this compile-time constant,
significant amounts of memory are saved.
Warn on the console when tunable values for netisr are automatically
adjusted during boot due to exceeding limits, invalid values, or as a
result of DEVICE_POLLING.
threads:
- Support up to one netisr thread per CPU, each processings its own
workstream, or set of per-protocol queues. Threads may be bound
to specific CPUs, or allowed to migrate, based on a global policy.
In the future it would be desirable to support topology-centric
policies, such as "one netisr per package".
- Allow each protocol to advertise an ordering policy, which can
currently be one of:
NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
an implicit or explicit source (such as an interface or socket).
NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
as well as allowing protocols to provide a flow generation function
for mbufs without flow identifers (m2flow). Falls back on
NETISR_POLICY_SOURCE if now flow ID is available.
NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
each packet handled by netisr (m2cpuid).
- Provide utility functions for querying the number of workstreams
being used, as well as a mapping function from workstream to CPU ID,
which protocols may use in work placement decisions.
- Add explicit interfaces to get and set per-protocol queue limits, and
get and clear drop counters, which query data or apply changes across
all workstreams.
- Add a more extensible netisr registration interface, in which
protocols declare 'struct netisr_handler' structures for each
registered NETISR_ type. These include name, handler function,
optional mbuf to flow ID function, optional mbuf to CPU ID function,
queue limit, and ordering policy. Padding is present to allow these
to be expanded in the future. If no queue limit is declared, then
a default is used.
- Queue limits are now per-workstream, and raised from the previous
IFQ_MAXLEN default of 50 to 256.
- All protocols are updated to use the new registration interface, and
with the exception of netnatm, default queue limits. Most protocols
register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
NETISR_POLICY_FLOW, and will therefore take advantage of driver-
generated flow IDs if present.
- Formalize a non-packet based interface between interface polling and
the netisr, rather than having polling pretend to be two protocols.
Provide two explicit hooks in the netisr worker for start and end
events for runs: netisr_poll() and netisr_pollmore(), as well as a
function, netisr_sched_poll(), to allow the polling code to schedule
netisr execution. DEVICE_POLLING still embeds single-netisr
assumptions in its implementation, so for now if it is compiled into
the kernel, a single and un-bound netisr thread is enforced
regardless of tunable configuration.
In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.
Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.
An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking. It will be enabled once further rmlock
optimization has taken place. However, in practice, netisrs are
rarely registered or unregistered at runtime.
A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.
This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.
Bump __FreeBSD_version.
Reviewed by: bz
direct dispatch policy for specific protocols (NETISR_USB). We leave
the additional 'flags' argument to netisr_register() for the time being,
even though it is no longer required.
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred). Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.
Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired. This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.
It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.
Reviewed by: bz
MFC after: 1 month
X-MFC note: We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
but the rest can go back.
recursive entering of the socket code from the routing code:
- Modify rt_dispatch() to bundle up the sockaddr family, if any,
associated with a pending mbuf to dispatch to routing sockets, in
an m_tag on the mbuf.
- Allocate NETISR_ROUTE for use by routing sockets.
- Introduce rtsintrq, an ifqueue to be used by the netisr, and
introduce rts_input(), a function to unbundle the tagged sockaddr
and inject the mbuf and address into raw_input(), which previously
occurred in rt_dispatch().
- Introduce rts_init() to initialize rtsintrq, its mutex, and
register the netisr. Perform this at the same point in system
initialization as setup of the domains.
This change introduces asynchrony between the generation of a
pending routing socket message and delivery to sockets for use
by userspace. It avoids socket->routing->rtsock->socket use and
helps to avoid lock order reversals between the routing code and
socket code (in particular, raw socket control blocks), as route
locks are held over calls to rt_dispatch().
Reviewed by: "George V.Neville-Neil" <gnn@neville-neil.com>
Conceptual head nod by: sam
whether or not the isr needs to hold Giant when running; Giant-less
operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive
Supported by: FreeBSD Foundation
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.
Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
Non-SMP, i386-only, no polling in the idle loop at the moment.
To use this code you must compile a kernel with
options DEVICE_POLLING
and at runtime enable polling with
sysctl kern.polling.enable=1
The percentage of CPU reserved to userland can be set with
sysctl kern.polling.user_frac=NN (default is 50)
while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.
Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at
http://info.iet.unipi.it/~luigi/polling/
and also supports polling in the idle loop.
NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.
NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.
Quick description of files touched by this commit:
sys/conf/files.i386
new file kern/kern_poll.c
sys/conf/options.i386
new option
sys/i386/i386/trap.c
poll in trap (disabled by default)
sys/kern/kern_clock.c
initialization and hardclock hooks.
sys/kern/kern_intr.c
minor swi_net changes
sys/kern/kern_poll.c
the bulk of the code.
sys/net/if.h
new flag
sys/net/if_var.h
declaration for functions used in device drivers.
sys/net/netisr.h
NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
device driver modifications
spending, which was unused now that all software interrupts have
their own thread. Make the legacy schednetisr use an atomic op
for setting bits in the netisr mask.
Reviewed by: jhb
type of software interrupt. Roughly, what used to be a bit in spending
now maps to a swi thread. Each thread can have multiple handlers, just
like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
software interrupt thread to run, so spending, NSWI, and the shandlers
array are no longer needed. We can now have an arbitrary number of
software interrupt threads. When you register a software interrupt
thread via sinthand_add(), you get back a struct intrhand that you pass
to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
more intuitive. Also, prefix all the members of struct intrhand with
'ih_'.
- Make swi_net() a MI function since there is now no point in it being
MD.
Submitted by: cp
Define the NETISR just like all the other NETISRs.
unifdef -Usun -D__FreeBSD__ we will probably never support sun4c
and if we do we can't use the solaris code anyway and I doubt
anybody will be running Fore ATM cards in then in the first place.
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.
There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)
The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.
The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.
Also removed some uneeded includes from if_aue.c and if_kue.c
Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Kernel Appletalk protocol support
both CAP and netatalk can make use of this..
still needs some owrk but it seemd the right tiime to commit it
so other can experiment.
Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
there may even be LKMs.) Also, change the internal name of `unixdomain'
to `localdomain' since AF_LOCAL is now the preferred name of this family.
Declare netisr correctly and in the right place.
