running" panics.
Previously, recursion through the "include" feature was prevented by
marking each ruleset as "running" when applied. This doesn't work for
the case where two DEVFS instances try to apply the same ruleset at
the same time.
Instead introduce the sysctl vfs.devfs.rule_depth (default == 1) which
limits how many levels of "include" we will traverse.
Be aware that traversal of "include" is recursive and kernel stack
size is limited.
MFC: after 3 days
that with the NIC set of registers rather than the ASIC registers. I
believe this was a harmless oversight, since we set ED_P0_CR to the
same value 5ms later, but just to be safe...
it is destroyed in GEOM, in addition to being removed from /dev.
Before this patch, if you applied a new MBR which deleted a slice,
the deleted slice would not be in /dev, but it would still appear
in kern.geom.conftxt and kern.geom.confxml, which would confused
the diskPartitionEditor in sysinstall.
Submitted by: pjd
Tested by: pjd, rodrigc
MFC after: 1 week
risky because the "current time" is supposed to be fed to the card during
initialization, and the current time is supposed to be put into each command
that is sent to the card. Hopefully either the card doesn't actually care
about the timestamps, or it doesn't care about the absolute values so long
and the relative values are consistent. Not an MFC candidate until more
thorough testing can be done.
While I'm here add KASSERT(9) to notify failure of SYSUNINIT handler.
Reported by: Ben Kaduk < minimarmot AT gmail DOT com >
Tested by: Ben Kaduk < minimarmot AT gmail DOT com >
o Attach AX88x90's MII bus to system, and require its presence.
o Reorg the mii code a little, and move more of it into pccard attachment.
o Eliminate ed_pccard_{read,write}_attrmem in favor of a more appropriate
function in the pccard layer.
o Update comments to reflect knowledge gained.
o Update how re recognize a NE-2000 ROM. I found a couple of different
datasheets that define the structure of the PROM data, so the code's
old heuristics have been removed, and comments updated to reflect the
structure.
o Eliminate work around for EC2T. It is no longer needed, and was wrong
headed since the EC2T has a Winbound 82C926C in it, not a AX88x90.
o Add copyright to if_ed_pccard.c, since I believe I've re-written more than
3/4 of it.
# With these changes, all of my 20-odd ed based cards work, except for the
# NetGear FA-410, and I'm pretty sure that's a MII/PHY problem.
attach to. These cards are combo cards (in that they have a modem
inside of them), but not true MFC cards. Full support of these cards
will have to wait until we can pick the config to use and for the PFC
support that I have brewing.
fifo_kqfilter() VOP implementations, since they in theory are used
only on open file descriptors, in which case the ioctls are via
fifo_ioctl_f() and kqueue requests are via fifo_kqfilter_f().
Generate warnings if they are entered for now. These printf()
calls should become panic() calls.
Annotate and re-implement fifo_ioctl_f(): don't arbitrarily
forward ioctls to the socket layer, only forward the ones we
explicitly support for fifos. In the case of FIONREAD, don't
forward the request to the write socket on a read-write fifo, or
the read result is overwritten. Annotate a nasty case for the
undefined POSIX O_RDWR on fifos, in which failure of the second
ioctl will result in the socket pair being in an inconsistent
state.
Assert copyright as I find myself rewriting non-trivial parts of
fifofs.
MFC after: 3 days
be held when entering a kqueue filter for fifos via a socket buffer
event: as such, assert the lock unconditionally rather than acquiring
it conditionall.
MFC after: 3 days
1) fifo_kqfilter() is not actually ever used, it likely should be GC'd.
2) fifo_kqfilter_f() doesn't implement EVFILT_VNODE, so detecting events
on the underlying vnode for a fifo no longer works (it did in 4.x).
Likely, fifo_kqfilter_f() should forward the request to the VFS using
fp->f_vnode, which would work once fifo_kqfilter() was detached from
the vnode operation vector (removing the fifo override).
Discussed with: phk
used when a read filter is requested on a write-only fifo descriptor, or
a write filter is requested on a read-only fifo descriptor. This
permits the filters to be registered, but never raises the event, which
causes kqueue behavior for fifos to more closely match similar semantics
for poll and select, which permit testing for the condition even though
the condition will never be raised, and is consistent with POSIX's notion
that a fifo has identical semantics to a one-way IPC channel created
using pipe() on most operating systems.
The fifo regression test suite can now run to completion on HEAD without
errors.
MFC after: 3 days
- Remove an assertion in sound.c, it's not needed (and causes a panic now).
From the conversation via mail between glebius and Ariff:
---snip---
> Well, but which mutex protects now? Do we own anything else
> in pcm_chnalloc()? I see some queue(4) macros in pcm_chnalloc(),
> they should be protected, shouldn't they?
Queue insertion/removal occur during
1) driver loading (which is pretty much single thread /
sequential) or unloading (mutex protected, bail out if there is
any channel with refcount > 0 or busy).
2) vchan_create()/destroy(), (which is *sigh* quite complicated), but
somehow protected by 'master'/parent channel mutex. Other
thread cannot add/remove vchan (or even continue traversing
that queue) unless it can acquire parent channel mutex.
---snip---
Fix the locking in dsp.c to prevent a LOR (AFAIK not on the LOR page).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested with: INVARIANTS[1] and DIAGNOSTICS[2]
Tested by: netchild [1,2], David Reid <david@jetnet.co.uk> [1]
'buffers' pending NMIs from multiple interrupting PMCs and delivers
them serially.
Reported by: Olivier Crameri <olivier.crameri@epfl.ch>
MFC after: 3 days
according to POSIX, not to mention the fact that it doesn't make sense
(and hence isn't really implemented). This causes the fifo_misc
regression test to succeed.
file descriptor. Otherwise, the read end of a fifo might return that it
is writable (which it isn't).
Only poll the fifo for write events if the fifo attached to a writable
file descriptor. Otherwise, the write end of a fifo might return that
it is readable (which it isn't).
In the event that a file is FREAD|FWRITE (which is allowed by POSIX, but
has undefined behavior), we poll for both.
MFC after: 3 days
to poll the write socket for, the fifo polling code proceeded to poll
for the complete set of events. Use 'levents' instead of 'events' as
the argument to poll, and only poll the write socket if there is
interest in write events.
MFC after: 3 days
while sleeping to allocate fifo state: due to using the vnode lock to
serialize access to a fifo during open, it shouldn't happen (tm).
MFC after: 3 days
In case this causes trouble for some other chipsets add a comment how to
proceed. If we don't get bugreports, this should be removed after a while
(some releases?).
PR: 56617 [1], 29465, 39260, 40574, 68225
Submitted by: Matthew E. Gove <mgove@comcast.net> [1]
believe that there are PC98 systems with an OPTi chip.
I don't know enough about this special PC architecture to be sure about
this, so let's find out by letting people with such a system complain in
case this commit breaks the sound system for them. It's easy to revert
then.
PR: 45673
Submitted by: Watanabe Kazuhiro <CQG00620@nifty.ne.jp>
same as today: do no power management. 1 means be conservative about
what you power down (any device class that has caused problems gets
added here). 2 means be agressive about what gets powered down (any
device class that's fundamental to the system is here). 3 means power
them all down, reguardless. The default is 1.
The effect in the default system is to add mass storage devices to the
list that we don't power down. From all the pciconf -l lists that
I've seen for the aac and amr issue, the bad device has been a mass
storage device class.
This is an attempt at a compromise between the very small number of
systems that have extreme issues with powerdown, and the very large
number of systems that gain real benefits from powerdown (I get about
20% more battery life when I attach a minimal set of drivers on my
Sony). Hopefully it will strike the proper balance.
MFC After: 3 days (before next beta)
is aligned with the sectorsize value returned by GEOM, before
doing a bread() of the superblock.
This eliminates a panic when trying the following on an empty CD-ROM drive:
mount_ext2fs /dev/acd0 /mnt
Reviewed by: phk
pmap_bootstrap by using the sync;isync big hammer to make sure
all prior operations have completed.
Reported by: Nathan Whitehorn <nathan at uchicago edu>
MFC after: 2 days
* New definition CHN_F_HAS_VCHAN.
- channel.c
* Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead
of relying on SLIST_EMPTY(&channel->children) == true for better
clarification and future possible usages of children (like
'slave' channel).
* Various fixes, including blocksize / format bps allignment,
better 24bit seeking (mplayer, others).
* Improve format chain building, it's now possible to record something
to a format non-native to the soundcard through various feeder format
converters or to higher sampling rate. This also gains another feature,
like doing vchan mixing on non s16le soundcard such as sb8.
- sound.c
* Increase robustness within various function that handle vchan
creation / termination (these function need a total rewrite, but
that would cause other major rewrite within various places too!).
As far as its robustness can be guaranteed, leave it as is.
* Optimize channel ordering, prefer *real* hardware playback
channels over virtual channels. cat /dev/sndstat should look
better.
* Increase sndstat verbosity to include bufsoft/bufhard allocation.
- vchan.c
* Fix LOR 119.
- http://sources.zabbadoz.net/freebsd/lor.html#119
* Reorder / increase robustness of vchan_create() / destroy().
Enforce destroy_dev() during destroy operation, fix possible
panic / dangling character device.
- http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html
* Tolerate a little bit more during mixing process, this should help
non s16le soundcards.
Note: Recoring in a non-native rate/format may result in overruns. A friendly
application is wavrec from audio/wavplay. The problem is under
investigation.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
From the PR:
---snip---
The vibra16X supports full duplex. I traced the Windows driver, and what is
does is that it programs one DMA channel 8-bit, and the other 16-bit. There
might be some kind of auto detection logic here, because it always uses 8-bit
for playback, even if I play 16-bit sound ...
---snip---
PR: 80977
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
locks were not aquired because the user buffers were not wired, thus it was
possible that that SYSCTL_OUT could sleep, causing a number of different
problems such as lock ordering issues and dead locks.
-Wire user supplied buffer to ensure SYSCTL_OUT will not sleep.
-Pickup ifnet locks to protect the list.
-Where applicable pickup address locks.
-Pickup radix node head locks.
-Remove splnet stubs
-Remove various comments about locking here, because they are no
longer needed.
It is the hope that these changes will make sysctl_rtsock MP safe.
MFC after: 3 weeks