Commit Graph

20 Commits

Author SHA1 Message Date
Warner Losh
e54b5dd9ff Make the name parameter const char *. 2001-08-11 05:16:00 +00:00
Daniel Eischen
437df4859a To be consistent, use the __weak_reference macro from <sys/cdefs.h>
instead of #pragma weak to create weak definitions.

Suggested by:	bde
2001-04-10 04:19:21 +00:00
Daniel Eischen
e5106342c6 Add weak definitions for wrapped system calls. In general:
_foo - wrapped system call
	foo - weak definition to _foo

and for cancellation points:

	_foo - wrapped system call
	__foo - enter cancellation point, call _foo(), leave
	        cancellation point
	foo - weak definition to __foo

Change use of global _thread_run to call a function to get the
currently running thread.

Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation.  This allows an application
to provide its own pthread functions.

Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex.  Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.

Approved by:	-arch
2001-01-24 13:03:38 +00:00
Daniel Eischen
b5a8a15c2f Don't needlessly poll file descriptors when there are no
file descriptors needing to be polled (Doh!).  Reported
by Dan Nelson <dnelson@emsphone.com>.

Don't install and start the scheduling timer until the
first thread is created.  This prevents the overhead of
having a periodic scheduling signal in a single threaded
program.  Reported by Dan Nelson <dnelson@emsphone.com>.

Allow builtin longjmps out of application installed
signal handlers without the need perform any post-handler
cleanup:

  o Change signal handling to save the threads interrupted
    context on the stack.  The threads current context is
    now always stored in the same place (in the pthread).
    If and when a signal handler returns, the interrupted
    context is copied back to the storage area in the pthread.

  o Before calling invoking a signal handler for a thread,
    back the thread out of any internal waiting queues
    (mutex, CV, join, etc) to which it belongs.

Rework uthread_info.c a bit to make it easier to change
the format of a thread dump.

Use an alternal signal stack for the thread library's
signal handler.  This allows us to fiddle with the main
threads stack without fear of it being in use.

Reviewed by:	jasone
2000-11-09 05:08:26 +00:00
Daniel Eischen
fbeb36e4bf Implement zero system call thread switching. Performance of
thread switches should be on par with that under scheduler
activations.

  o Timing is achieved through the use of a fixed interval
    timer (ITIMER_PROF) to count scheduling ticks instead
    of retrieving the time-of-day upon every thread switch
    and calculating elapsed real time.

  o Polling for I/O readiness is performed once for each
    scheduling tick instead of every thread switch.

  o The non-signal saving/restoring versions of setjmp/longjmp
    are used to save and restore thread contexts.  This may
    allow the removal of _THREAD_SAFE macros from setjmp()
    and longjmp() - needs more investigation.

Change signal handling so that signals are handled in the
context of the thread that is receiving the signal.  When
signals are dispatched to a thread, a special signal handling
frame is created on top of the target threads stack.  The
frame contains the threads saved state information and a new
context in which the thread can run.  The applications signal
handler is invoked through a wrapper routine that knows how
to restore the threads saved state and unwind to previous
frames.

Fix interruption of threads due to signals.  Some states
were being improperly interrupted while other states were
not being interrupted.  This should fix several PRs.

Signal handlers, which are invoked as a result of a process
signal (not by pthread_kill()), are now called with the
code (or siginfo_t if SA_SIGINFO was set in sa_flags) and
sigcontext_t as received from the process signal handler.

Modify the search for a thread to which a signal is delivered.
The search algorithm is now:

  o First thread found in sigwait() with signal in wait mask.
  o First thread found sigsuspend()'d on the signal.
  o Current thread if signal is unmasked.
  o First thread found with signal unmasked.

Collapse machine dependent support into macros defined in
pthread_private.h.  These should probably eventually be moved
into separate MD files.

Change the range of settable priorities to be compliant with
POSIX (0-31).  The threads library uses higher priorities
internally for real-time threads (not yet implemented) and
threads executing signal handlers.  Real-time threads and
threads running signal handlers add 64 and 32, respectively,
to a threads base priority.

Some other small changes and cleanups.

PR:		17757 18559 21943
Reviewed by:	jasone
2000-10-13 22:12:32 +00:00
Jason Evans
ccb3a748f4 Fix a memory leak. pthread_set_name_np() allocates space for a name, but
was not deallocating space for the previous name, if any.

PR:	misc/18504
2000-05-16 22:08:14 +00:00
Marcel Moolenaar
3cf3c5d9dd sigset_t change (part 5 of 5)
-----------------------------

Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c

The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.

There are version bumps for the following libraries:
  libdialog
  libreadline
  libc
  libc_r
  libedit
  libftpio
  libss

These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.

NOTE: libncurses already had an version bump and has not been
      given one now.

NOTE: doscmd is a real casualty and has been disconnected for
      the moment. Reconnection will eventually happen after
      doscmd has been fixed. I'm aware that being the last one
      to touch it, I'm automaticly promoted to being maintainer.
      According to good taste this means that I will receive a
      badge which either will be glued or mechanically stapled,
      drilled or otherwise violently forced onto me :-)

NOTE: pcvt/vttest cannot be compiled with -traditional. The
      change cause sys/types to be included along the way which
      contains the const and volatile modifiers. I don't consider
      this a solution, but more a workaround.
1999-09-29 15:18:46 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Daniel Eischen
fa7c4d5575 Add RCS IDs to those files without them.
Fix copyrights (s/REGENTS/AUTHOR).

Suggested by:	tg
Approved by:	jb
1999-08-05 12:15:30 +00:00
John Birrell
02292f131a In the words of the author:
o The polling mechanism for I/O readiness was changed from
    select() to poll().  In additon, a wrapped version of poll()
    is now provided.

  o The wrapped select routine now converts each fd_set to a
    poll array so that the thread scheduler doesn't have to
    perform a bitwise search for selected fds each time file
    descriptors are polled for I/O readiness.

  o The thread scheduler was modified to use a new queue (_workq)
    for threads that need work.  Threads waiting for I/O readiness
    and spinblocks are added to the work queue in addition to the
    waiting queue.  This reduces the time spent forming/searching
    the array of file descriptors being polled.

  o The waiting queue (_waitingq) is now maintained in order of
    thread wakeup time.  This allows the thread scheduler to
    find the nearest wakeup time by looking at the first thread
    in the queue instead of searching the entire queue.

  o Removed file descriptor locking for select/poll routines.  An
    application should not rely on the threads library for providing
    this locking; if necessary, the application should use mutexes
    to protect selecting/polling of file descriptors.

  o Retrieve and use the kernel clock rate/resolution at startup
    instead of hardcoding the clock resolution to 10 msec (tested
    with kernel running at 1000 HZ).

  o All queues have been changed to use queue.h macros.  These
    include the queues of all threads, dead threads, and threads
    waiting for file descriptor locks.

  o Added reinitialization of the GC mutex and condition variable
    after a fork.  Also prevented reallocation of the ready queue
    after a fork.

  o Prevented the wrapped close routine from closing the thread
    kernel pipes.

  o Initialized file descriptor table for stdio entries at thread
    init.

  o Provided additional flags to indicate to what queues threads
    belong.

  o Moved TAILQ initialization for statically allocated mutex and
    condition variables to after the spinlock.

  o Added dispatching of signals to pthread_kill.  Removing the
    dispatching of signals from thread activation broke sigsuspend
    when pthread_kill was used to send a signal to a thread.

  o Temporarily set the state of a thread to PS_SUSPENDED when it
    is first created and placed in the list of threads so that it
    will not be accidentally scheduled before becoming a member
    of one of the scheduling queues.

  o Change the signal handler to queue signals to the thread kernel
    pipe if the scheduling queues are protected.  When scheduling
    queues are unprotected, signals are then dequeued and handled.

  o Ensured that all installed signal handlers block the scheduling
    signal and that the scheduling signal handler blocks all
    other signals.  This ensures that the signal handler is only
    interruptible for and by non-scheduling signals.  An atomic
    lock is used to decide which instance of the signal handler
    will handle pending signals.

  o Removed _lock_thread_list and _unlock_thread_list as they are
    no longer used to protect the thread list.

  o Added missing RCS IDs to modified files.

  o Added checks for appropriate queue membership and activity when
    adding, removing, and searching the scheduling queues.  These
    checks add very little overhead and are enabled when compiled
    with _PTHREADS_INVARIANTS defined.  Suggested and implemented
    by Tor Egge with some modification by me.

  o Close a race condition in uthread_close.  (Tor Egge)

  o Protect the scheduling queues while modifying them in
    pthread_cond_signal and _thread_fd_unlock.  (Tor Egge)

  o Ensure that when a thread gets a mutex, the mutex is on that
    threads list of owned mutexes.  (Tor Egge)

  o Set the kernel-in-scheduler flag in _thread_kern_sched_state
    and _thread_kern_sched_state_unlock to prevent a scheduling
    signal from calling the scheduler again.  (Tor Egge)

  o Don't use TAILQ_FOREACH macro while searching the waiting
    queue for threads in a sigwait state, because a change of
    state destroys the TAILQ link.  It is actually safe to do
    so, though, because once a sigwaiting thread is found, the
    loop ends and the function returns.  (Tor Egge)

  o When dispatching signals to threads, make the thread inherit
    the signal deferral flag of the currently running thread.
    (Tor Egge)

Submitted by: Daniel Eischen <eischen@vigrid.com> and
              Tor Egge <Tor.Egge@fast.no>
1999-06-20 08:28:48 +00:00
John Birrell
58a7cc5d1b [ The author's description... ]
o Runnable threads are now maintained in priority queues.  The
    implementation requires two things:

      1.) The priority queues must be protected during insertion
          and removal of threads.  Since the kernel scheduler
          must modify the priority queues, a spinlock for
          protection cannot be used.   The functions
          _thread_kern_sched_defer() and _thread_kern_sched_undefer()
          were added to {un}defer kernel scheduler activation.

      2.) A thread (active) priority change can be performed only
          when the thread is removed from the priority queue.  The
          implementation uses a threads active priority when
          inserting it into the queue.

    A by-product is that thread switches are much faster.  A
    separate queue is used for waiting and/or blocked threads,
    and it is searched at most 2 times in the kernel scheduler
    when there are active threads.  It should be possible to
    reduce this to once by combining polling of threads waiting
    on I/O with the loop that looks for timed out threads and
    the minimum timeout value.

  o Functions to defer kernel scheduler activation were added.  These
    are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
    and may be called recursively.  These routines do not block the
    scheduling signal, but latch its occurrence.  The signal handler
    will not call the kernel scheduler when the running thread has
    deferred scheduling, but it will be called when running thread
    undefers scheduling.

  o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING.  All the
    POSIX routines required by this should now be implemented.
    One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
    to be defined by including pthread.h.  These defines are currently
    in sched.h.  I modified pthread.h to include sched.h but don't
    know if this is the proper thing to do.

  o Added support for priority protection and inheritence mutexes.
    This allows definition of _POSIX_THREAD_PRIO_PROTECT and
    _POSIX_THREAD_PRIO_INHERIT.

  o Added additional error checks required by POSIX for mutexes and
    condition variables.

  o Provided a wrapper for sigpending which is marked as a hidden
    syscall.

  o Added a non-portable function as a debugging aid to allow an
    application to monitor thread context switches.  An application
    can install a routine that gets called everytime a thread
    (explicitly created by the application) gets context switched.
    The routine gets passed the pthread IDs of the threads that are
    being switched in and out.

Submitted by: Dan Eischen <eischen@vigrid.com>

Changes by me:

  o Added a PS_SPINBLOCK state to deal with the priority inversion
    problem most often (I think) seen by threads calling malloc/free/realloc.

  o Dispatch signals to the running thread directly rather than at a
    context switch to avoid the situation where the switch never occurs.
1999-03-23 05:07:56 +00:00
Warner Losh
d0c4729014 Fix a minor security problem in libc_r.
Submitted by: Alexandre Snarskii <snar@paranoia.ru>
Approved by: John Birrell
Reminded me that I'd been sitting on this too long: snar@paranoia.ru
1999-01-11 00:02:37 +00:00
John Birrell
05f3e91279 Use snprintf instead of sprintf to avoid long source file paths from
launching an application into space when someone tries to debug it.

The dead thread list now has it's own link pointer, so use that when
reporting the grateful dead.
1998-09-30 06:29:54 +00:00
Bruce Evans
bcc58f6898 Fixed a printf format error. Didn't fix assumption that sigset_t is
integral.
1998-06-30 18:00:11 +00:00
John Birrell
ddc8afd422 Implement compile time debug support instead of tracking file name and
line number every time a file descriptor is locked.

This looks like a big change but it isn't. It should reduce the size
of libc_r and make it run slightly faster.
1998-06-09 23:21:05 +00:00
John Birrell
4a027d50c7 Change signal model to match POSIX (i.e. one set of signal handlers
for the process, not a separate set for each thread). By default, the
process now only has signal handlers installed for SIGVTALRM, SIGINFO
and SIGCHLD. The thread kernel signal handler is installed for other
signals on demand. This means that SIG_IGN and SIG_DFL processing is now
left to the kernel, not the thread kernel.

Change the signal dispatch to no longer use a signal thread, and
call the signal handler using the stack of the thread that has the
signal pending.

Change the atomic lock method to use test-and-set asm code with
a yield if blocked. This introduces separate locks for each type
of object instead of blocking signals to prevent a context
switch. It was this blocking of signals that caused the performance
degradation the people have noted.

This is a *big* change!
1998-04-29 09:59:34 +00:00
John Birrell
af139b98d4 Allow a thread dump to report the thread's sigmask when in the
PS_SIGWAIT state.
1998-04-17 09:39:37 +00:00
John Birrell
d60f0fa60d Change the FILE locking to be by FILE, not by the underlying fd as
it was. Add a FILE_WAIT state and queue threads waiting for a FILE
lock. Start using the sys/queue.h macros instead of the way that MIT
pthreads did it.

Add a thread name to the private thread structure and a non-POSIX
function to set this. This helps (me at least) when sending a SIGINFO
to a threaded process to get a /tmp/uthread.dump to see what the
<expletive deleted> threads are doing this time. It is nice to be
able to recognise (yes, I spell that with an 's' too) which threads
are which.
1998-04-11 07:47:22 +00:00
Julian Elischer
c840cec7c5 Submitted by: John Birrell
uthreads update from the author.
1997-02-05 23:26:09 +00:00
Julian Elischer
012dfd00b3 Reviewed by: julian
Submitted by:	 john birrel

One version of the pthreads library
another will follow with differnt actions under some cases..
not QUITE complete
1996-01-22 00:23:58 +00:00