Commit Graph

164 Commits

Author SHA1 Message Date
Maxime Henrion
e542f156cc Other minor style nits I missed in ep_if_start() in my previous
commit.
2003-06-26 17:02:52 +00:00
Maxime Henrion
52eec71b80 Make if_ep_start() look a bit more like other if_start() functions,
by calling the first mbuf in the chain m0 and fixing a few nearby
style bugs, mostly s/0/NULL/.
2003-06-26 14:28:35 +00:00
Maxime Henrion
c7d24cc1a2 Fix a race condition that was introduced since pccbb interrupts are
flag'ed INTR_MPSAFE.  In ep_if_start(), use the IF_DEQUEUE macro to
grab the next mbuf to send, and use IF_PREPEND if the card is busy
and we actually can't handle it right now.

The old code was first getting the mbuf by taking it from the queue
without using the macros, thus without locking, and without removing
it from the queue either.  It was later assuming that IF_DEQUEUE would
give him this same mbuf.

Tested by:	mich
2003-06-26 13:27:44 +00:00
Warner Losh
f5746231ff Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
Matthew N. Dodd
d938c3689d Revert 1.21; this was local code that should not have been
committed.
2003-03-30 08:13:47 +00:00
Matthew N. Dodd
672fc9ebf6 - Free interrupt handler in ep_free().
- Move ep_pccard_detach() to if_ep.c and rename to ep_detach()
- Specify detach methods for all bus frontends.
2003-03-29 22:27:41 +00:00
Matthew N. Dodd
18e03d5e08 Checksum the configuration EEPROM. 2003-03-29 21:57:32 +00:00
Matthew N. Dodd
bb25efadc4 - Return error status instead of value in get_e().
- Modify ep_get_macaddr() to return an error status.
- Reverse the return value logic of eeprom_rdy().
2003-03-29 21:44:46 +00:00
Matthew N. Dodd
b26809608c Register dependency on the elink module. 2003-03-29 13:45:17 +00:00
Marcel Moolenaar
1583e8d08e Fix compilation on non-i386 machines. Inconsistent conditional
compilation yielded definitions that we're used.
2003-02-23 03:39:22 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Matthew N. Dodd
8ae37ad0ba Bandaid the bits that use the elink_foo() functions which are
i386 only at this point.
2003-02-13 23:01:59 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Takanori Watanabe
6e8f09ca61 Fix build breakage on my pccard related commit. 2002-05-31 01:08:49 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
3fe83829bf Two fixes from Jonathan Hanna:
1) We shouldn't continue when we get a RX complete because we ack it
	   and the TX complete.
	2) Fix a couple of spl leaks
(why splbio is needed in ISR, I cannot understand).

MFC after: 3 days
2002-02-12 05:32:58 +00:00
Warner Losh
bca07edc83 More devices. Obtained from NetBSD. 2001-11-15 07:57:38 +00:00
Warner Losh
9de4df498c Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
Warner Losh
269b3a8211 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
Warner Losh
64c30c9cb5 Commit part of the patch that I have for card eject problems with the
ep driver.  The rest of the patch will wait until I can put the time
into it to get it righter than the kludge it is.

This protects us against card eject problems at all times,e xecpt when
we're in the epintr ISR.
2001-06-05 22:29:16 +00:00
Warner Losh
828e38343a Use PCCARD_CIS_xxx #defines for the table of oem ids. These usually
translate to all NULLs (as for all the ones in this commit).
2001-01-21 08:15:37 +00:00
Peter Wemm
ce1c1e5def Add the 3COM ID's that I could find in the pccarddevs file that seemed
to match the pccard.conf file.  There are more ID's that need adding, but
these seem to be the common ones.

This was committed on an ep0 interface under NEWCARD:
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x300-0x30f irq 9 function 0 config 1 on pccard1
ep0: Ethernet address 00:10:4b:df:48:57

Reviewed by: imp
2001-01-07 21:24:41 +00:00
Yoshihiro Takahashi
8297c2fc98 Fixed to support 3Com 3C569B for PC-98.
Submitted by:	"Hirokazu WATANABE" <gwna@geocities.co.jp>
2000-12-09 04:25:07 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Warner Losh
07dad7e607 Remove 7 unnecessary includes frmo phk's script 2000-09-20 19:31:37 +00:00
Warner Losh
2276cee521 Implement indirection in the pccard probe/attach. This should make it
possible to have different probe/attach semantics between the two
systems and yet still use the same driver for both.

Compatibility methods for OLDCARD drivers.  We use these routines to make
it possible to call the OLDCARD driver's probe routine in the context that
it expects.  For OLDCARD these are implemented as pass throughs to the
device_{probe,attach} routines.  For NEWCARD they are implemented such
such that probe becomes strictly a matching routine and attach does both
the old probe and old attach.

compat devices should use the following:

	/* Device interface */
	DEVMETHOD(device_probe),	pccard_compat_probe),
	DEVMETHOD(device_attach),	pccard_compat_attach),
	/* Card interface */
	DEVMETHOD(card_compat_match,	foo_match),	/* newly written */
	DEVMETHOD(card_compat_probe,	foo_probe),	/* old probe */
	DEVMETHOD(card_compat_attach,	foo_attach),	/* old attach */

This will allow a single driver binary image to be used for both
OLDCARD and NEWCARD.

Drivers wishing to not retain OLDCARD compatibility needn't do this.

ep driver minorly updated.

sn driver updated more than minorly.  Add module dependencies to allow
module to load.  Also change name to if_sn.  Add some debugging code.
attempt to fix the cannot allocate memory problem I'd been seeing.
Minor formatting nits.
2000-09-19 04:39:20 +00:00
Warner Losh
4bae64510b Add ID for 3C1. It is a etherlink iii in a CompactFlash form factor.
It doesn't seem to work, but at least is identified correctly.  Minor
tree housekeeping on my part.
2000-09-13 03:57:37 +00:00
Matthew N. Dodd
5ce6286805 Properly detect ISA cards in EISA mode and skip them in the ISA identify
routine so that they will be picked up by the EISA front end.

PR:		i386/2598
2000-07-18 06:37:08 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Archie Cobbs
2e2de7f23f Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Warner Losh
3f994c78d5 Remove unloaded printf. We do this now in the newbus layer. 2000-04-17 04:39:38 +00:00
Matthew N. Dodd
c9c222f749 Fix a problem that caused TCP fragments to be lost (among other things.) 2000-03-24 23:31:42 +00:00
Matthew N. Dodd
958795f321 Copy how everyone else is doing packet transmission. (NetBSD mostly)
I've been running this for a month or so and have had no problems with it
and if I recall it was my last speed tweak.  Holler if this breaks anything.
2000-03-13 11:59:21 +00:00
Matthew N. Dodd
6629a1f812 Follow the docs a bit more in epstop() with respect to delays.
Trivial formatting.
2000-03-13 11:55:09 +00:00
Matthew N. Dodd
4a18218d69 Get rid of table lookup in favor of just subtracting. Everyone else
does it like this and I see no point in being different.
2000-03-13 11:51:44 +00:00
Matthew N. Dodd
d718250d48 Call epstop() in ep_attach(). While this shouldn't be necessary we'll
do it just in case.  (Actually, with PCMCIA cards we can get in a state
where it may be required.)
2000-03-13 11:48:03 +00:00
Matthew N. Dodd
0e8fe3f0e9 Fix a bug in the last commit. >> 4 instead of >> 8. *bap*
Fix a long-standing bug where I used a 'break;' instead of a 'continue;';
you had to have multiple ISA boards in non-PnP mode with an 'unknown' board
with a lower MAC address to find this one.  Since I have 4 3c5x9 boards
in my test box I was somewhat confused when this happened. :)

Make the messages printed by ep_isa_identify() a little more consistent;
we'll only see them in verbose boot mode but it makes me feel better if
they look nice.
2000-01-23 08:46:21 +00:00
Matthew N. Dodd
adc098b163 Add the ID for the 3c509-TPC.
Also, while I'm here, add a mechanism to catch unknown board IDs that
are likely to be 3c509s and allow them to be attached.

PR:		kern/16304
Submitted by:	Kelly Yancey <kbyanc@posi.net>
2000-01-23 08:23:38 +00:00
Matthew N. Dodd
f0b421372f Fix driver to restore function on 3c574 adapters. The panic on
ifconfig and bogus ethernet address (4b:57:4b:57:4b:57) has been
hacked around.  I'll revisit this when I have a clue whats going on.

Reviewed by:	obrien
2000-01-15 05:21:43 +00:00
Peter Wemm
c5191a983c Pre 4.0 tidy up.
Collect together the components of several drivers and export eisa from
the i386-only area (It's not, it's on some alphas too).  The code hasn't
been updated to work on the Alpha yet, but that can come later.

Repository copies were done a while ago.
Moving these now keeps them in consistant place across the 4.x series
as the newbusification progresses.

Submitted by:   mdodd
2000-01-14 07:14:17 +00:00
Matthew N. Dodd
2b00168c1f Remove a stray splx(s) call. This fixes the compiler warning.
Submitted by:	gibbs
2000-01-12 17:51:01 +00:00
Matthew N. Dodd
c7c26de958 Speedup if_start routine a little. TX threshold logic needs some more
kicking but these changes get me around 1000 KB/sec.
2000-01-12 06:42:49 +00:00
Matthew N. Dodd
2ff4e76374 Fix the performance problems I caused by setting ifq_maxlen to 8.
Use IFQ_MAXLEN instead.  This seemed like a good idea at the time since
most 3c509s have all of 2k for their TX fifo.  My intention was to revisit
ifq_maxlen and auto-scale it or something.

ttcp-t: 16777216 bytes in 21.53 real seconds = 761.07 KB/sec +++
ttcp-t: 2771 I/O calls, msec/call = 7.96, calls/sec = 128.72
ttcp-t: 0.0user 2.9sys 0:21real 13% 20i+280d 222maxrss 0+2pf 717+0csw

ttcp-r: 16777216 bytes in 14.11 real seconds = 1161.48 KB/sec +++
ttcp-r: 2050 I/O calls, msec/call = 7.05, calls/sec = 145.33
ttcp-r: 0.0user 1.4sys 0:14real 10% 87i+1198d 196maxrss 0+1pf 1949+186csw

I've got some tweaks that move the TX speed up to the RX speed but I've
got to groom them from the mess I've made of my source tree.

Yelled at by:	wpaul
2000-01-12 05:27:08 +00:00
Warner Losh
e9cb811b17 Commit kernel part of patches to get the 3Com OfficeConnect 3CXSH572BT
working on -current.

Submitted by: Eric D. Futch <efutch@nyct.net>
Approved by: mdodd
2000-01-10 02:32:43 +00:00
Warner Losh
5aa701b662 kill debug printf that says detach 1999-12-10 07:24:39 +00:00
Matthew N. Dodd
a4e3d8de0c Add defines for additional EEPROM locations and register definitions. 1999-12-06 09:29:34 +00:00
Matthew N. Dodd
d6eb71ddd5 Whitespace cleanups. 1999-12-06 09:16:13 +00:00