the orphaned descendants. Base of the API is modelled after the same
feature from the DragonFlyBSD.
Requested by: bapt
Reviewed by: jilles (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
Mave the grant table code into the dev/xen folder in preparation for turning
it into a device using the newbus interface. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
When running as a Xen PVH Dom0 we need to add custom buses that override
some of the functionality present in the ACPI PCI Bus and the PCI Bus. We
currently override the ACPI PCI Bus, but not the PCI Bus, so add a new
override for the PCI Bus and share the generic functions between them.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
conf/files.amd64:
- Add the new files.
x86/xen/xen_pci_bus.c:
- Generic file that contains the PCI overrides so they can be used by the
several PCI specific buses.
xen/xen_pci.h:
- Prototypes for the generic overried functions.
dev/xen/pci/xen_pci.c:
- Xen specific override for the PCI bus.
dev/xen/pci/xen_acpi_pci.c:
- Xen specific override for the ACPI PCI bus.
to automatically set the armv6 option when MACHINE_ARCH is armv6. That
allows replacing ever-growing lists of cpu names as options to compile
a given file with the using either "optional armv6" or "optional !armv6".
partitions. Several utilities still use this interface and require
additional information since gpart was activated than before. This
allows fsck of a UFS partition without having to specify it is UFS,
per historic behavior.
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
problems than it solves. SYSDIR is already defined almost always and
can be used instead. Working around the one case where it isn't is
much easier than working around the fact that @ may not exist in 18
other places.
Differential Revision: https://reviews.freebsd.org/D1100
875. This intersects with the agp_i810.c, which supports all Intels
from i810 to Core i5/7. Both agp_intel.c and agp_i810.c are compiled
into kernel when device agp is specified in config, and agp_i810
attach seems to be selected by chance due to linking order.
Strip support for 810 and later from agp_intel.c. Since 440-class
chipsets do not support any long-mode capable CPUs, remove agp_intel.c
from amd64 kernel file list. Note that agp_intel.c is not compiled
into agp.ko on amd64 already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
Multipass device attachment was tested on many arm platforms by users and
only success was reported on the arm@ mailing list. This is just the
long-delayed followup of making it the default.
Multipass attachment is necessary when using vendor-supplied FDT data,
because our devices may need to be attached in a different order than they
are described in the FDT data.
This device is only attached to priviledged domains, and allows the
toolstack to interact with Xen. The two functions of the privcmd
interface is to allow the execution of hypercalls from user-space, and
the mapping of foreign domain memory.
Sponsored by: Citrix Systems R&D
i386/include/xen/hypercall.h:
amd64/include/xen/hypercall.h:
- Introduce a function to make generic hypercalls into Xen.
xen/interface/xen.h:
xen/interface/memory.h:
- Import the new hypercall XENMEM_add_to_physmap_range used by
auto-translated guests to map memory from foreign domains.
dev/xen/privcmd/privcmd.c:
- This device has the following functions:
- Allow user-space applications to make hypercalls into Xen.
- Allow user-space applications to map memory from foreign domains,
this is accomplished using the newly introduced hypercall
(XENMEM_add_to_physmap_range).
xen/privcmd.h:
- Public ioctl interface for the privcmd device.
x86/xen/hvm.c:
- Remove declaration of hypercall_page, now it's declared in
hypercall.h.
conf/files:
- Add the privcmd device to the build process.
The user-space event channel device is used by applications to receive
and send event channel interrupts. This device is based on the Linux
evtchn device.
Sponsored by: Citrix Systems R&D
xen/evtchn/evtchn_dev.c:
- Remove the old event channel device, which was already disabled in
the build system.
dev/xen/evtchn/evtchn_dev.c:
- Import a new event channel device based on the one present in
Linux.
- This device allows the following operations:
- Bind VIRQ event channels (ioctl).
- Bind regular event channels (ioctl).
- Create and bind new event channels (ioctl).
- Unbind event channels (ioctl).
- Send notifications to event channels (ioctl).
- Reset the device shared memory ring (ioctl).
- Unmask event channels (write).
- Receive event channel upcalls (read).
- The new code is MP safe, and can be used concurrently.
conf/files:
- Add the new device to the build system.
vxlan creates a virtual LAN by encapsulating the inner Ethernet frame in
a UDP packet. This implementation is based on RFC7348.
Currently, the IPv6 support is not fully compliant with the specification:
we should be able to receive UPDv6 packets with a zero checksum, but we
need to support RFC6935 first. Patches for this should come soon.
Encapsulation protocols such as vxlan emphasize the need for the FreeBSD
network stack to support batching, GRO, and GSO. Each frame has to make
two trips through the network stack, and each frame will be at most MTU
sized. Performance suffers accordingly.
Some latest generation NICs have begun to support vxlan HW offloads that
we should also take advantage of. VIMAGE support should also be added soon.
Differential Revision: https://reviews.freebsd.org/D384
Reviewed by: gnn
Relnotes: yes
vestige of a time when we needed to do that, but it is all handled by
beforedepend now. When we depend on the symlink, bmake will cause the
file to be rebuilt always.
With this change, dtrace.ko doesn't rebuild every time through a
KERNFAST run.
Sponsored by: Netfix
For compatibility, 'device windtunnel' is still supported, but one should use
'device adm1030' instead, and this has been updated in GENERIC and NOTES.
The powerpc support was the only supported architecture not prepending the elf format name
with "-freebsd" in base this change makes it consistent with other architectures.
On newer version of binutils the powerpc format is also prepended with "-freebsd".
Also modify the kernel ldscripts in that regards.
As a result it is now possible cross build the kernel on powerpc using newer binutils
Differential Revision: https://reviews.freebsd.org/D926
Differential Revision: https://reviews.freebsd.org/D928
syscalls themselves are tightly coupled with the network stack and
therefore should not be in the generic socket code.
The following four syscalls have been marked as NOSTD so they can be
dynamically registered in sctp_syscalls_init() function:
sys_sctp_peeloff
sys_sctp_generic_sendmsg
sys_sctp_generic_sendmsg_iov
sys_sctp_generic_recvmsg
The syscalls are also set up to be dynamically registered when COMPAT32
option is configured.
As a side effect of moving the SCTP syscalls, getsock_cap needs to be
made available outside of the uipc_syscalls.c source file. A proper
prototype has been added to the sys/socketvar.h header file.
API tests from the SCTP reference implementation have been run to ensure
compatibility. (http://code.google.com/p/sctp-refimpl/source/checkout)
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: tuexen, rrs
Obtained from: Juniper Networks, Inc.
interrupts and report the largest value seen as sysctl
debug.max_kstack_used. Useful to estimate how close the kernel stack
size is to overflow.
In collaboration with: Larry Baird <lab@gta.com>
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
