Commit Graph

316 Commits

Author SHA1 Message Date
Adrian Chadd
b2bdc62a95 Refactor / restructure the RSS code into generic, IPv4 and IPv6 specific
bits.

The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.

* net/rss_config.[ch] takes care of the generic bits for doing
  configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
  that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.

This should have no functional impact on anyone currently using
the RSS support.

Differential Revision:	D1383
Reviewed by:	gnn, jfv (intel driver bits)
2015-01-18 18:06:40 +00:00
Andrey V. Elsukov
44eb8bbe7b Do not count security policy violation twice.
ipsec*_in_reject() do this by their own.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 19:20:13 +00:00
Craig Rodrigues
a8da5dd658 MFp4: @181627
Allow UMA allocated memory to be freed when VNET jails are torn down.

Differential Revision: D1201
Submitted by: bz
Reviewed by: rwatson, gnn
2014-12-06 02:59:59 +00:00
Hans Petter Selasky
c25290420e Start process of removing the use of the deprecated "M_FLOWID" flag
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.

This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.

"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.

Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.

MFC after:	1 month
Sponsored by:	Mellanox Technologies
2014-12-01 11:45:24 +00:00
Gleb Smirnoff
6df8a71067 Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed.
Sponsored by:	Nginx, Inc.
2014-11-07 09:39:05 +00:00
Bryan Venteicher
81d3ec1763 Add context pointer and source address to the UDP tunnel callback
These are needed for the forthcoming vxlan implementation. The context
pointer means we do not have to use a spare pointer field in the inpcb,
and the source address is required to populate vxlan's forwarding table.

While I highly doubt there is an out of tree consumer of the UDP
tunneling callback, this change may be a difficult to eventually MFC.

Phabricator:	https://reviews.freebsd.org/D383
Reviewed by:	gnn
2014-10-10 06:08:59 +00:00
Bryan Venteicher
a0a9e1b57c Add missing UDP multicast receive dtrace probes
Phabricator:	https://reviews.freebsd.org/D924
Reviewed by:	rpaulo markj
MFC after:	1 month
2014-10-09 22:36:21 +00:00
Bryan Venteicher
c19f98eb74 Check for mbuf copy failure when there are multiple multicast sockets
This partitular case is the only path where the mbuf could be NULL.
udp_append() checked for a NULL mbuf only after invoking the tunneling
callback. Our only in tree tunneling callback - SCTP - assumed a non
NULL mbuf, and it is a bit odd to make the callbacks responsible for
checking this condition.

This also reduces the differences between the IPv4 and IPv6 code.

MFC after:	1 month
2014-10-09 05:17:47 +00:00
Michael Tuexen
83e95fb30b The default for UDPLITE_RECV_CSCOV is zero. RFC 3828 recommend
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.

Reviewed by: kevlo
MFC after: 3 days
2014-10-01 05:43:29 +00:00
Michael Tuexen
c6d81a3445 UDPLite requires a checksum. Therefore, discard a received packet if
the checksum is 0.

MFC after: 3 days
2014-09-30 20:29:58 +00:00
Michael Tuexen
0f4a03663b If the checksum coverage field in the UDPLITE header is the length
of the complete UDPLITE packet, the packet has full checksum coverage.
SO fix the condition.

Reviewed by: kevlo
MFC after: 3 days
2014-09-30 18:17:28 +00:00
Michael Tuexen
03f90784bf Checksum coverage values larger than 65535 for UDPLite are invalid.
Check for this when the user calls setsockopt using UDPLITE_{SEND,RECV}CSCOV.

Reviewed by: kevlo
MFC after: 3 days
2014-09-28 17:22:45 +00:00
Adrian Chadd
8ad1a83b48 Calculate the RSS hash for outbound UDPv4 frames.
Differential Revision:	https://reviews.freebsd.org/D527
Reviewed by:	grehan
2014-09-09 04:19:36 +00:00
Adrian Chadd
9d3ddf4384 Add support for receiving and setting flowtype, flowid and RSS bucket
information as part of recvmsg().

This is primarily used for debugging/verification of the various
processing paths in the IP, PCB and driver layers.

Unfortunately the current implementation of the control message path
results in a ~10% or so drop in UDP frame throughput when it's used.

Differential Revision:	https://reviews.freebsd.org/D527
Reviewed by:	grehan
2014-09-09 01:45:39 +00:00
Kevin Lo
8f5a8818f5 Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have
only one protocol switch structure that is shared between ipv4 and ipv6.

Phabric:	D476
Reviewed by:	jhb
2014-08-08 01:57:15 +00:00
Michael Tuexen
a485f139c3 Disable TX checksum offload for UDP-Lite completely. It wasn't used for
partial checksum coverage, but even for full checksum coverage it doesn't
work.
This was discussed with Kevin Lo (kevlo@).
2014-05-12 09:46:48 +00:00
Michael Tuexen
6c19260269 Whitespace change. 2014-05-10 08:48:04 +00:00
Michael Tuexen
d58c15339b Fix a logic bug which prevented the sending of UDP packet with 0 checksum.
This bug was introduced in r264212 and should be X-MFCed with that
revision, if UDP-Lite support if MFCed.
2014-05-09 14:15:48 +00:00
Kevin Lo
cfac59ecb1 Remove a bogus re-assignment. 2014-04-08 01:54:50 +00:00
Kevin Lo
d1b18731d9 Minor style cleanups. 2014-04-07 01:55:53 +00:00
Kevin Lo
e06e816f67 Add support for UDP-Lite protocol (RFC 3828) to IPv4 and IPv6 stacks.
Tested with vlc and a test suite [1].

[1] http://www.erg.abdn.ac.uk/~gerrit/udp-lite/files/udplite_linux.tar.gz

Reviewed by:	jhb, glebius, adrian
2014-04-07 01:53:03 +00:00
Attilio Rao
54366c0bd7 - For kernel compiled only with KDTRACE_HOOKS and not any lock debugging
option, unbreak the lock tracing release semantic by embedding
  calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
  version of the releasing functions for mutex, rwlock and sxlock.
  Failing to do so skips the lockstat_probe_func invokation for
  unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
  kernel compiled without lock debugging options, potentially every
  consumer must be compiled including opt_kdtrace.h.
  Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
  dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
  is linked there and it is only used as a compile-time stub [0].

[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested.  As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while.  Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].

Sponsored by:	EMC / Isilon storage division
Discussed with:	rstone
[0] Reported by:	rstone
[1] Discussed with:	philip
2013-11-25 07:38:45 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Mark Johnston
1ad19fb657 The second last argument of udp:::receive is supposed to contain the
connection state, not the IP header.

X-MFC with:	r254889
2013-08-26 00:28:57 +00:00
Mark Johnston
57f6086735 Implement the ip, tcp, and udp DTrace providers. The probe definitions use
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.

Tested by:	gnn, hiren
MFC after:	1 month
2013-08-25 21:54:41 +00:00
Andrey V. Elsukov
6794f46021 Remove the large part of struct ipsecstat. Only few fields of this
structure is used, but they already have equal fields in the struct
newipsecstat, that was introduced with FAST_IPSEC and then was merged
together with old ipsecstat structure.

This fixes kernel stack overflow on some architectures after migration
ipsecstat to PCPU counters.

Reported by:	Taku YAMAMOTO, Maciej Milewski
2013-07-23 14:14:24 +00:00
Andrey V. Elsukov
5b7cb97c2b Migrate structs arpstat, icmpstat, mrtstat, pimstat and udpstat to PCPU
counters.
2013-07-09 09:50:15 +00:00
Andrey V. Elsukov
6659296cb0 Use IPSECSTAT_INC() and IPSEC6STAT_INC() macros for ipsec statistics
accounting.

MFC after:	2 weeks
2013-06-20 09:55:53 +00:00
Pawel Jakub Dawidek
6acd596efb More warnings for zones that depend on the kern.ipc.maxsockets limit.
Obtained from:	WHEEL Systems
2012-12-08 12:51:06 +00:00
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
Andrey V. Elsukov
ffdbf9da3b Remove the recently added sysctl variable net.pfil.forward.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.

Suggested by:	andre
2012-11-02 01:20:55 +00:00
Andrey V. Elsukov
c1de64a495 Remove the IPFIREWALL_FORWARD kernel option and make possible to turn
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.

Sponsored by:	Yandex LLC
Discussed with:	net@
MFC after:	2 weeks
2012-10-25 09:39:14 +00:00
Gleb Smirnoff
8ad458a471 Do not reduce ip_len by size of IP header in the ip_input()
before passing a packet to protocol input routines.
  For several protocols this mean that now protocol needs to
do subtraction itself, and for another half this means that
we do not need to add header length back to the packet.

  Make ip_stripoptions() to adjust ip_len, since now we enter
this function with a packet header whose ip_len does represent
length of entire packet, not payload only.
2012-10-23 08:33:13 +00:00
Gleb Smirnoff
8f134647ca Switch the entire IPv4 stack to keep the IP packet header
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.

  After this change a packet processed by the stack isn't
modified at all[2] except for TTL.

  After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.

[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.

[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.

Reviewed by:	luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by:	ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
Gleb Smirnoff
105bd2113b In ip_stripoptions():
- Remove unused argument and incorrect comment.
  - Fixup ip_len after stripping.
2012-10-12 09:24:24 +00:00
Michael Tuexen
f584d74b4d Add a cmsg of type IP_TOS for UDP/IPv4 sockets to specify the TOS byte.
MFC after: 3 days
2012-06-12 14:56:08 +00:00
Bjoern A. Zeeb
0cfdff24d2 MFp4 bz_ipv6_fast:
Properly protect the inp read access when handling the control code.
  In the past this was expensive but given the rlock it's not so much
  anymore.

  Spotted while:	optimizing udp6
  Discussed with:	rwatson (a few months ago)

  Sponsored by:	The FreeBSD Foundation
  Sponsored by:	iXsystems

Reviewed by:	gnn (as part of the whole)
MFC After:	3 days
2012-05-25 09:24:45 +00:00
Bjoern A. Zeeb
40b676bea6 Export the udp_cksum sysctl for upcoming SCTP work. Rather than always,
SCTP will only do IPv4 UDP checksum calculation as defined by the host
policy.  When tunneling SCTP always calculates the inner checksum already
so not doing the outer UDP can save cycles.

While here virtualize the variable.

Requested by:	tuexen
MFC after:	2 weeks
2012-03-27 15:14:29 +00:00
Bjoern A. Zeeb
8a006adb24 Add support for IPv6 to ipfw fwd:
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.

Obtained from:	David Dolson at Sandvine Incorporated
		(original version for ipfw fwd IPv6 support)
Sponsored by:	Sandvine Incorporated
PR:		bin/117214
MFC after:	4 weeks
Approved by:	re (kib)
2011-08-20 17:05:11 +00:00
Robert Watson
52cd27cb58 Implement a CPU-affine TCP and UDP connection lookup data structure,
struct inpcbgroup.  pcbgroups, or "connection groups", supplement the
existing inpcbinfo connection hash table, which when pcbgroups are
enabled, might now be thought of more usefully as a per-protocol
4-tuple reservation table.

Connections are assigned to connection groups base on a hash of their
4-tuple; wildcard sockets require special handling, and are members
of all connection groups.  During a connection lookup, a
per-connection group lock is employed rather than the global pcbinfo
lock.  By aligning connection groups with input path processing,
connection groups take on an effective CPU affinity, especially when
aligned with RSS work placement (see a forthcoming commit for
details).  This eliminates cache line migration associated with
global, protocol-layer data structures in steady state TCP and UDP
processing (with the exception of protocol-layer statistics; further
commit to follow).

Elements of this approach were inspired by Willman, Rixner, and Cox's
2006 USENIX paper, "An Evaluation of Network Stack Parallelization
Strategies in Modern Operating Systems".  However, there are also
significant differences: we maintain the inpcb lock, rather than using
the connection group lock for per-connection state.

Likewise, the focus of this implementation is alignment with NIC
packet distribution strategies such as RSS, rather than pure software
strategies.  Despite that focus, software distribution is supported
through the parallel netisr implementation, and works well in
configurations where the number of hardware threads is greater than
the number of NIC input queues, such as in the RMI XLR threaded MIPS
architecture.

Another important difference is the continued maintenance of existing
hash tables as "reservation tables" -- these are useful both to
distinguish the resource allocation aspect of protocol name management
and the more common-case lookup aspect.  In configurations where
connection tables are aligned with hardware hashes, it is desirable to
use the traditional lookup tables for loopback or encapsulated traffic
rather than take the expense of hardware hashes that are hard to
implement efficiently in software (such as RSS Toeplitz).

Connection group support is enabled by compiling "options PCBGROUP"
into your kernel configuration; for the time being, this is an
experimental feature, and hence is not enabled by default.

Subject to the limited MFCability of change dependencies in inpcb,
and its change to the inpcbinfo init function signature, this change
in principle could be merged to FreeBSD 8.x.

Reviewed by:    bz
Sponsored by:   Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00
Robert Watson
d3c1f00350 Add _mbuf() variants of various inpcb-related interfaces, including lookup,
hash install, etc.  For now, these are arguments are unused, but as we add
RSS support, we will want to use hashes extracted from mbufs, rather than
manually calculated hashes of header fields, due to the expensive of the
software version of Toeplitz (and similar hashes).

Add notes that it would be nice to be able to pass mbufs into lookup
routines in pf(4), optimising firewall lookup in the same way, but the
code structure there doesn't facilitate that currently.

(In principle there is no reason this couldn't be MFCed -- the change
extends rather than modifies the KBI.  However, it won't be useful without
other previous possibly less MFCable changes.)

Reviewed by:    bz
Sponsored by:   Juniper Networks, Inc.
2011-06-04 16:33:06 +00:00
Robert Watson
fa046d8774 Decompose the current single inpcbinfo lock into two locks:
- The existing ipi_lock continues to protect the global inpcb list and
  inpcb counter.  This lock is now relegated to a small number of
  allocation and free operations, and occasional operations that walk
  all connections (including, awkwardly, certain UDP multicast receive
  operations -- something to revisit).

- A new ipi_hash_lock protects the two inpcbinfo hash tables for
  looking up connections and bound sockets, manipulated using new
  INP_HASH_*() macros.  This lock, combined with inpcb locks, protects
  the 4-tuple address space.

Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb
connection locks, so may be acquired while manipulating a connection on
which a lock is already held, avoiding the need to acquire the inpcbinfo
lock preemptively when a binding change might later be required.  As a
result, however, lookup operations necessarily go through a reference
acquire while holding the lookup lock, later acquiring an inpcb lock --
if required.

A new function in_pcblookup() looks up connections, and accepts flags
indicating how to return the inpcb.  Due to lock order changes, callers
no longer need acquire locks before performing a lookup: the lookup
routine will acquire the ipi_hash_lock as needed.  In the future, it will
also be able to use alternative lookup and locking strategies
transparently to callers, such as pcbgroup lookup.  New lookup flags are,
supplementing the existing INPLOOKUP_WILDCARD flag:

  INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb
  INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb

Callers must pass exactly one of these flags (for the time being).

Some notes:

- All protocols are updated to work within the new regime; especially,
  TCP, UDPv4, and UDPv6.  pcbinfo ipi_lock acquisitions are largely
  eliminated, and global hash lock hold times are dramatically reduced
  compared to previous locking.
- The TCP syncache still relies on the pcbinfo lock, something that we
  may want to revisit.
- Support for reverting to the FreeBSD 7.x locking strategy in TCP input
  is no longer available -- hash lookup locks are now held only very
  briefly during inpcb lookup, rather than for potentially extended
  periods.  However, the pcbinfo ipi_lock will still be acquired if a
  connection state might change such that a connection is added or
  removed.
- Raw IP sockets continue to use the pcbinfo ipi_lock for protection,
  due to maintaining their own hash tables.
- The interface in6_pcblookup_hash_locked() is maintained, which allows
  callers to acquire hash locks and perform one or more lookups atomically
  with 4-tuple allocation: this is required only for TCPv6, as there is no
  in6_pcbconnect_setup(), which there should be.
- UDPv6 locking remains significantly more conservative than UDPv4
  locking, which relates to source address selection.  This needs
  attention, as it likely significantly reduces parallelism in this code
  for multithreaded socket use (such as in BIND).
- In the UDPv4 and UDPv6 multicast cases, we need to revisit locking
  somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which
  is no longer sufficient.  A second check once the inpcb lock is held
  should do the trick, keeping the general case from requiring the inpcb
  lock for every inpcb visited.
- This work reminds us that we need to revisit locking of the v4/v6 flags,
  which may be accessed lock-free both before and after this change.
- Right now, a single lock name is used for the pcbhash lock -- this is
  undesirable, and probably another argument is required to take care of
  this (or a char array name field in the pcbinfo?).

This is not an MFC candidate for 8.x due to its impact on lookup and
locking semantics.  It's possible some of these issues could be worked
around with compatibility wrappers, if necessary.

Reviewed by:    bz
Sponsored by:   Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
Bjoern A. Zeeb
79288c112c Make the UDP code compile without INET. Expose udp_usrreq.c to IPv6 only
as well compiling out most functions adding or extending #ifdef INET
coverage.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	4 days
2011-04-30 11:17:00 +00:00
Edward Tomasz Napierala
79bb84fb15 Refactor udp_input(), moving calls to u_tun_func() into udp_append().
Obtained from: Wheel Systems Sp. z o.o.
Reviewed by:	bz@
2011-04-14 10:40:57 +00:00
Daniel Eischen
9d22191d17 Oops, revert an accidental local change that got added in
my last commit (r218627).  No damage was done in the last
commit, just some duplicated code was added (which is now
removed).
2011-02-13 04:44:06 +00:00
Daniel Eischen
f7e6ce6d7a Allow the SO_SETFIB socket option to select the default (0)
routing table.

Reviewed by:	julian
2011-02-13 00:14:13 +00:00
Randall Stewart
c3f9cbb0e1 Fix style 9 nit that snuck in when I
grabbed the wrong patch ;-0 (thanks Daniel)

MFC after:	1 week
2011-01-19 20:57:08 +00:00
Randall Stewart
a38b1c8c5e Fix a bug where Multicast packets sent from a
udp endpoint may end up echoing back to the sender
even with OUT joining the multi-cast group.

Reviewed by:	gnn, bms, bz?
Obtained from:	deischen (with help from)
2011-01-19 19:07:16 +00:00
Matthew D Fleming
79c3d51b86 Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need
to rely on the format string.  For SYSCTL_PROC instances that I
noticed a discrepancy between the CTLTYPE and the format specifier,
fix the CTLTYPE.
2011-01-18 21:14:13 +00:00
Dimitry Andric
3e288e6238 After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00