before changing the divisor bits in the register. We were writing a zero
to the register, which clears the enable, but also cleared the divisor bits
at the same time. That's a violation of the sdhci spec, which says the
divisor can only be changed when the clock is disabled. This has worked
okay on most hardware for years, but the TI OMAP controller would misbehave
after changing the divisor improperly.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>
Ensure that first_func is set to 0 on every iteration of the PCI slot
enumeration loop after the first. There is a continue statement that would
cause first_func to stay at 1 any PCI device where slot 0 has no functions
until we find a slot that does have a function. This would cause us to
not enumerate the first PCI function on the device.
Credit to markj@ for spotting the bug.
X-MFC-With: r264011
While I'm here, remove aue_eeprom_getword() as its only usage is to
read station address and make it more readable. This change is
inspired by NetBSD.
With this change, aue(4) should work on big endian architectures.
PR: 188177
default wMaxPacketSize (64 or 512 bytes). This actually helps older FTDI
devices (which were USB 1/full speed) more than the new H-series high
speed, but even for the new chips it helps cut the number of interrupts
when doing very high speed (3-12mbaud).
This avoids extra locking in icl_pdu_queue(); the upper layer needs to call
it while holding its own lock anyway, to avoid sending PDUs out of order.
Sponsored by: The FreeBSD Foundation
PCIe Alternate RID Interpretation (ARI) is an optional feature that
allows devices to have up to 256 different functions. It is
implemented by always setting the PCI slot number to 0 and
re-purposing the 5 bits used to encode the slot number to instead
contain the function number. Combined with the original 3 bits
allocated for the function number, this allows for 256 functions.
This is enabled by default, but it's expected to be a no-op on currently
supported hardware. It's a prerequisite for supporting PCI SR-IOV, and
I want the ARI support to go in early to help shake out any bugs in it.
ARI can be disabled by setting the tunable hw.pci.enable_ari=0.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
Recent FDTI chips have the ability to operate at up to 12mbps. The newer
chips with faster clocks have the same usb vendor/product IDs as the older
chips; the bcdDevice field must be used to detect the newer versions. This
change includes a new function to do that instead of using just the IDs from
the vendor/product table.
The code to choose the baud clock divisor is completely rewritten. In
addition to supporting the new higher clock rates, the rewrite fixes a
longstanding bug in the old code which put the high bits of the fractional
part of the divisor into the wrong place in the wIndex field. That bug
was mostly harmless -- it accidentally didn't affect standard baud rates
and would only show up when using relatively fast non-standard rates.
My PCI RID changes somehow got intermixed with my PCI ARI patch when I
committed it. I may have accidentally applied a patch to a non-clean
working tree. Revert everything while I figure out what went wrong.
Pointy hat to: rstone
out 32 is not enough to support a full sized TSO packet.
While I'm here fix a long standing bug introduced in r169632 in
bce(4) where it didn't include L2 header length of TSO packet in
the maximum DMA segment size calculation.
In collaboration with: rmacklem
MFC after: 2 weeks
o Move vd_bitbltchr vga's driver method to vd_maskbitbltchr.
o Implement new vd_bitbltchr method for vga driver. (It do single write for 8
pixels, have to be a bit faster).
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
vt(9) crash on resume fixed, but Xorg still have damaged screen on resume (at
least with i915kms), so better to switch to VT0 before suspend and back on
resume.
Sponsored by: The FreeBSD Foundation
Statically allocated terminal window have not initialized callout handler, so we
have to initialize it even for existing window if it is console window.
Reported by: gjb and many
Tested by: gjb
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
Previous implementation limits put queue size only (when Tx lock can't
be acquired), but get queue may grow unboundedly which results in mbuf
pools exhaustion and latency growth.
Submitted by: Andrew Rybchenko <Andrew.Rybchenko at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
These are needed to diagnose TX hangs that I and hiren are seeing.
Without it, the only way we'll see debugging is by having ATH_DEBUG_SW_TX
enabled and that is going to be very, very spammy.
ATH_DEBUG_RESET is fine; it's only going to be done during stuck beacon
situations in AP mode.
Whilst I'm here, and now that it's behind debugging, let's just disable
the "print only one" conditional. I'll eventually make it more tunable.
Tested:
* AR9220, hostap mode.
create character devices. The deadlock can happen if an application is
issuing IOCTLs which require USB refcounting, at the same time the USB
device is detaching.
There is already a counter in place in the USB device structure to
detect this situation, but it was not always checked ahead of invoking
functions that might destroy character devices, like detach, set
configuration, set alternate interface or detach active kernel driver.
Reported by: Daniel O'Connor <doconnor@gsoft.com.au>
MFC after: 1 week
device is asleep.
This doesn't avoid logging errors for things that are actually OK to
access whilst the chip is asleep (eg, the RTC registers (0x7000->0x70ff
on the AR5416 and later.)
But, this is a pretty good indicator if things are accessed incorrectly.
Tested:
* AR5416, STA
This way the state changes from sleep->awake before the registers are poked
and from awake->sleep after the registers are poked.
This way spurious warnings aren't printed by my (to be committed)
debugging code.
Tested:
* AR5416, STA
Yes, this means that sc_invalid is slightly racy, but there are other
issues here which need fixing.
This fixes a source of eventual LORs - ath_init() grabs ATH_LOCK to do
work and releases it before it calls ieee80211_start_all().
ieee80211_start_all() will grab the net80211 comlock to iterate over
the VAPs.
TODO:
* .. I should just migrate the ieee80211_start_all() work to a
deferred task so it can be done later; it doesn't have to be
immediately done.
Tested:
* AR5416, STA mode
then threads can sleep on the pip condition.
Avoid to deadlock such threads by correctly awakening the sleeping ones
after the pip is finished.
swapoff side of the bug can likely result in shutdown deadlocks.
Sponsored by: EMC / Isilon Storage Division
Reported by: pho, pluknet
Tested by: pho
- More flexible cluster size selection, including the ability to fall
back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
mbuf chain for any kind of freelist. This replaces two variants: one
for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster. It was limited to 4K clusters
only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes. The driver's
man page will be updated separately.
MFC after: 5 weeks
