The "files" staging name is not the same as "bsd.files.mk" but seems to just be
a group of extra files that are not the essential includes or libraries, which
include .
Sponsored by: EMC / Isilon Storage Division
This is because the previous version was very obscure about the fact
that despite having Clang "on by default" for architectures such as powerpc, it
does not actually build due to the GCC it uses not having C++11 support.
Using an external compiler that supports C++11 does allow this to work.
This whole block should be rethought more given "on by default" is not
really default without extra work which could actually be surprising for
why Clang is showing up when using a newer GCC.
Sponsored by: EMC / Isilon Storage Division
'buildconfig' is connected to 'all', but 'installconfig' is only called
manually. There is not much need to conditionalize this file right
now due to how it is hooked up and its impact on various build phases.
Sponsored by: EMC / Isilon Storage Division
- Rather than allow 'make clean*' to ignore dependencies, make a static
list of targets in STANDALONE_SUBDIR_TARGETS that are known to be safe.
This allows a user to override them if needed and avoids adding this feature
to user-defined targets that are in ${SUBDIR_TARGETS}. [1]
- This now also allows to force SUBDIR_PARALLEL when calling these
targets, since no dependencies are needed.
Reported by: ian [1]
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
X-MFC-With: r289778
properly recursed.
The .for loop was defining a ${__dir} variable that was being set at a
different evaluation time than the target itself, so every 'cd ${__dir}'
became the last value that was in ${__dir}. This resulted in 'make obj'
not properly being ran in the tree that would leave .depend files
scattered around when 'make all' was ran in rescue/.
To fix this, define a CRUNCH_SRCDIR_* for every prog if it does not
already have one and then use that variable in every relevant place.
This allows simplifying some logic as well.
Reported by: emaste
X-MFC-With: r289734
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
This partially reverts r284685. An attempt was made in r285295 to fix this
but was not enough. There were still $${} vars in the code that should have
been using the ${_page} and ${_sect} vars, but the bigger problem was that
.for cannot be used on .ALLSRC as it is not defined when the .for is evaluated.
Using ${MAN} here in a .for loop doesn't work either as the paths are not
expanded right for lib/libc/ subdirs despite having a .PATH set for all
of them.
Add some comments around long .else and .endif as well.
Sponsored by: EMC / Isilon Storage Division
This covers 'clean', 'cleandepend', 'cleandir', 'obj', 'objlink' and
'build-tools'.
This uses the same method as bsd.subdir.mk.
MFC after: 2 weeks
X-MFC-With: r289731
Sponsored by: EMC / Isilon Storage Division
- Remove handling of 'make -P' since that is for fmake only.
- Add '+' where appropriate for sub-make calls.
- Pass MK_TESTS=no to all of the sub-makes to prevent recursing into test
directories for targets such as 'obj', 'clean', 'depend', etc.
Sponsored by: EMC / Isilon Storage Division
This reverts r266473 as the need for it, working around .MAKE and '+'
issues, is no longer needed after r289460. This avoids extra log
output in -j builds of '-- _sub.TARGET --' that are redundant with the
'-- TARGET --' and '-- TARGET_subdir_DIR --' entries already showing.
r266473 also made a subtle change in the ordering of _SUBDIR handling. Before
the change, SUBDIRS were recursed into after building the TARGET due to the
.USE of _SUBDIR *appending* the commands onto the TARGET. After the change
though the indirection caused TARGET to depend on _sub.TARGET which had the
_SUBDIR handling in it. This TARGET would run after recursing. However, the
SUBDIR_PARALLEL handling from r263778 has this ordering as well. Since
this has so far not been a problem, for now make this behavior for
non-SUBDIR_PARALLEL use of _SUBDIR explicit by using .USEBEFORE.
Further research may change this back to .USE as well as the
SUBDIR_PARALLEL handling and bsd.progs.mk recursing.
Sponsored by: EMC / Isilon Storage Division
The SUBDIR_PARALLEL feature uses a .for dir in ${SUBDIR} loop. The old code
here for recursing was setting SUBDIR= as a make *argument*. The SUBDIR=
replacement was not actually handled until after the .for loop was unrolled.
This could be seen with a '.info ${SUBDIR} ${dir}' inside of the loop which
showed an empty ${SUBDIR} and a set ${dir}. Setting NO_SUBIDR= before calling
${MAKE} as an *environment* variable handles the case fine and is a more
proper mechanism for disabling subdir handling.
This could be seen with 'make -C tests/sys/kern -j15 SUBDIR_PARALLEL=yes'.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
variables are already set. This should cover odd cases such as the
COMPILER_TYPE override in lib/csu/powerpc64.
X-MFC-With: r289659
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
lookups.
This uses a special variable name based on a hash of ${CC}, ${PATH}, and
${MACHINE} to ensure that a cached value is not used if any of these
values changes to use a new compiler.
Before this there were 34,620 fork/exec from bsd.compiler.mk during a buildworld.
After this there are 608. More improvement is needed to cache a value from
the top-level before descending into subdirs in the various build phases.
Reviewed by: brooks (earlier version)
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3898
when -fstack-protector-strong is not available, like it was implicitly before
r288669
As noted by antoine@, devel/gcc (which is 4.8.5) lacks -fstack-protector-strong
support, whereas 4.8.4i (devel/gcc48) has the support.
Until a version is available which has -fstack-protector-strong support, be
conservative and only enable support with 4.9+.
Reviewed by: pfg
X-MFC with: r288669, r289465
Differential Revision: https://reviews.freebsd.org/D3924
This includes clang 3.5.0+, gcc 4.2.1, gcc 4.8.4+
This allows me to do subdirectory makes again after setting
MAKESYSPATH on 10.2-RELEASE as it comes with clang 3.4.1.
As a sidenote: this isn't technically correct for all vintages
of gcc 4.2.1, but will be correct when gcc is rebuilt/reinstalled
after r286074, so this version check should be good enough.
X-MFC with: r288669
Differential Revision: https://reviews.freebsd.org/D3924
Reviewed by: emaste, pfg
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
Before this, if a file was installed to DESTDIR/some/dir and that directory
was missing due to not having ran 'make distrib-dirs' yet, the file would
be installed as 'some/dir'. For something like bsd.incs.mk with INCLUDEDIR
being a sub-directory of /usr/include, this could result in all of the headers
being installed to a file rather than getting a directory of them.
Now it will error that the file/directory does not exist rather than hide
the issue.
Another option being discussed is to implement GNU's install -D flag which
would auto create any missing directories.
This is a mitigation of the problem. The proper order to the build is to
run 'make distrib-dirs' first, but that can be forgotten if building from
a sub-directory after updating the source code to the latest revision.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The 'config' target isn't really needed right now so just remove it to avoid
any clashes with config(8) building. It's also likely misspelled and should
be 'configs' if we decide to add it back. This was just a convenience
target recently added.
Sponsored by: EMC / Isilon Storage Division
For example in lib/atf/libatf-c++/tests/detail it is now possible to
run 'make application_test'. This was intended to worked for PROGS,
but lacked support for PROGS_CXX.
Also fix redefining the main PROG target to recurse. This isn't needed
since the main process is setting PROG/PROG_CXX to handle it directly
via bsd.prog.mk.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Some example where this is a problem:
lib/atf/libatf-c++/tests/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c++/tests/detail/Makefile:SRCS.${_T}= ${_T}.cpp test_helpers.cpp
lib/atf/libatf-c/tests/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/atf/libatf-c/tests/detail/Makefile:SRCS.${_T}= ${_T}.c test_helpers.c
lib/libpam/libpam/tests/Makefile:SRCS.${test} = ${test}.c ${COMMONSRC}
A similar change may be needed for FILES, SCRIPTS, or INCS, but for now stay
with just SRCS.
Reported by: rodrigc
MFC after: 3 weeks
X-MFC-With: r288218
Sponsored by: EMC / Isilon Storage Division
more typical ALL_SUBDIR_TARGETS entries and target hooks in bsd.incs.mk,
bsd.files.mk and bsd.confs.mk.
This allows the targets to be NOPs if unneeded and still work with the
shortcut 'make includes' to build and then install in a parallel-safe manner.
Sort and re-indent the ALL_SUBDIR_TARGETS with the new entries.
Sponsored by: EMC / Isilon Storage Division
Also improve documentation.
The SUBDIR_TARGETS variable should really be named LOCAL_SUBDIR_TARGETS, but
renaming it may be a surprise for downstream vendors who use this variable.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Before this, the target was unknown. Now it will recurse on subdirs and run
the target in the current directory. It is required to recurse as there
may be subdirs that have objs in their directory or in the object directory,
so it is not enough to just delete the objdir of the subdir parent.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
When run from bin/ls/tests, for example, the value of TESTSDIR would be
${TESTSBASE}/${RELDIR:H} -> /usr/tests/bin/ls/tests/.. ->
/usr/tests/bin/ls
Document the new behavior in bsd.README.
While here, also document TESTSBASE
Relnotes: yes
Differential Revision: D1022
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- projects/bmake and subsequent commits provide SRCTOP; there's no need to
manually specify it now.
- Compute a sane default for OBJTOP based on .OBJDIR and RELDIR. Manually
specifying this is probably no longer needed, but it persists just in case
(supporting commits will need to be made to move it out of some of the meta
.mk files).
- Compute a sane default for TESTSRC. Error out if the path cannot be found.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
