ARP requests only on the network where this IP address belong, to.
Before this change we did replied on all interfaces. This could
lead to an IP address conflict with host we are doing ARP proxy
for.
PR: kern/75634
Reviewed by: andre
incoming ARP packet and route request adding/removing
ARP entries. The root of the problem is that
struct llinfo_arp was accessed without any locks.
To close race we will use locking provided by
rtentry, that references this llinfo_arp:
- Make arplookup() return a locked rtentry.
- In arpresolve() hold the lock provided by
rt_check()/arplookup() until the end of function,
covering all accesses to the rtentry itself and
llinfo_arp it refers to.
- In in_arpinput() do not drop lock provided by
arplookup() during first part of the function.
- Simplify logic in the first part of in_arpinput(),
removing one level of indentation.
- In the second part of in_arpinput() hold rtentry
lock while copying address.
o Fix a condition when route entry is destroyed, while
another thread is contested on its lock:
- When storing a pointer to rtentry in llinfo_arp list,
always add a reference to this rtentry, to prevent
rtentry being destroyed via RTM_DELETE request.
- Remove this reference when removing entry from
llinfo_arp list.
o Further cleanup of arptimer():
- Inline arptfree() into arptimer().
- Use official queue(3) way to pass LIST.
- Hold rtentry lock while reading its structure.
- Do not check that sdl_family is AF_LINK, but
assert this.
Reviewed by: sam
Stress test: http://www.holm.cc/stress/log/cons141.html
Stress test: http://people.freebsd.org/~pho/stress/log/cons144.html
hosts to share an IP address, providing high availability and load
balancing.
Original work on CARP done by Michael Shalayeff, with many
additions by Marco Pfatschbacher and Ryan McBride.
FreeBSD port done solely by Max Laier.
Patch by: mlaier
Obtained from: OpenBSD (mickey, mcbride)
it isn't printed if the IP address in question is '0.0.0.0', which is
used by nodes performing DHCP lookup, and so constitute a false
positive as a report of misconfiguration.
conform to the rfc2734 and rfc3146 standard for IP over firewire and
should eventually supercede the fwe driver. Right now the broadcast
channel number is hardwired and we don't support MCAP for multicast
channel allocation - more infrastructure is required in the firewire
code itself to fix these problems.
1. rt_check() cleanup:
rt_check() is only necessary for some address families to gain access
to the corresponding arp entry, so call it only in/near the *resolve()
routines where it is actually used -- at the moment this is
arpresolve(), nd6_storelladdr() (the call is embedded here),
and atmresolve() (the call is just before atmresolve to reduce
the number of changes).
This change will make it a lot easier to decouple the arp table
from the routing table.
There is an extra call to rt_check() in if_iso88025subr.c to
determine the routing info length. I have left it alone for
the time being.
The interface of arpresolve() and nd6_storelladdr() now changes slightly:
+ the 'rtentry' parameter (really a hint from the upper level layer)
is now passed unchanged from *_output(), so it becomes the route
to the final destination and not to the gateway.
+ the routines will return 0 if resolution is possible, non-zero
otherwise.
+ arpresolve() returns EWOULDBLOCK in case the mbuf is being held
waiting for an arp reply -- in this case the error code is masked
in the caller so the upper layer protocol will not see a failure.
2. arpcom untangling
Where possible, use 'struct ifnet' instead of 'struct arpcom' variables,
and use the IFP2AC macro to access arpcom fields.
This mostly affects the netatalk code.
=== Detailed changes: ===
net/if_arcsubr.c
rt_check() cleanup, remove a useless variable
net/if_atmsubr.c
rt_check() cleanup
net/if_ethersubr.c
rt_check() cleanup, arpcom untangling
net/if_fddisubr.c
rt_check() cleanup, arpcom untangling
net/if_iso88025subr.c
rt_check() cleanup
netatalk/aarp.c
arpcom untangling, remove a block of duplicated code
netatalk/at_extern.h
arpcom untangling
netinet/if_ether.c
rt_check() cleanup (change arpresolve)
netinet6/nd6.c
rt_check() cleanup (change nd6_storelladdr)
+ struct ifnet: remove unused fields, move ipv6-related field close
to each other, add a pointer to l3<->l2 translation tables (arp,nd6,
etc.) for future use.
+ struct route: remove an unused field, move close to each
other some fields that might likely go away in the future
whether or not the isr needs to hold Giant when running; Giant-less
operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive
Supported by: FreeBSD Foundation
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
routine that takes a locked routing table reference and removes all
references to the entry in the various data structures. This
eliminates instances of recursive locking and also closes races
where the lock on the entry had to be dropped prior to calling
rtrequest(RTM_DELETE). This also cleans up confusion where the
caller held a reference to an entry that might have been reclaimed
(and in some cases used that reference).
Supported by: FreeBSD Foundation
that covers updates to the contents. Note this is separate from holding
a reference and/or locking the routing table itself.
Other/related changes:
o rtredirect loses the final parameter by which an rtentry reference
may be returned; this was never used and added unwarranted complexity
for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
we assume the parent will remain as long as the clone; doing this avoids
a circularity in locking during delete
o convert some timeouts to MPSAFE callouts
Notes:
1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
applications cannot/do-no know about mutex's. Doing this requires
that the mutex be the last element in the structure. A better solution
is to introduce an externalized version of struct rtentry but this is
a major task because of the intertwining of rtentry and other data
structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
work to eliminate many held references. If not these will be resolved
prior to release.
3. ATM changes are untested.
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS (partly)
RTF_STATIC routes. Do not check for RTF_HOST so as to avoid being DoSed
when an RTF_GENMASK route exists in the table.
Add a more verbose comment about exactly what this code does.
Submitted by: ru
attached network could exhaust kernel memory, and cause a system
panic, by sending a flood of spoofed ARP requests.
Approved by: jake (mentor)
Reported by: Apple Product Security <product-security@apple.com>
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.
Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
kernel access control.
When generating an ARP query, invoke a MAC entry point to permit the
MAC framework to label its mbuf appropriately for the interface.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
Register the ISR early, but do not actually kick off the timer until we
see some activity. This still saves us from running the arp timers on
a system with no network cards.
field. This returns the sdl_data field to a variable-length field. More
importantly, this prevents a easily-reproduceable data-corruption bug when
the interface name plus the hardware address exceed the sdl_data field's
original 12 byte limit. However, token-ring interfaces may still overflow
the new sdl_data field's 46 byte limit if the interface name exceeds 6
characters (since 6 characters for interface name plus 6 for hardware
address plus 34 for source routing = the size of sdl_data). Further
refinements could overcome this limitation but would break binary
compatibility; this commit only addresses fixing the bug for
commonly-occuring cases without breaking binary compatibility with the
intention that the functionality can be MFC'ed to -stable.
See message ID's (both send to -arch):
20020421013332.F87395-100000@gateway.posi.net20020430181359.G11009-300000@gateway.posi.net
for a more thorough description of the bug addressed and how to
reproduce it.
Approved by: silence on -arch and -net
Sponsored by: NTT Multimedia Communications Labs
MFC after: 1 week
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
