Such errors can occur as the result of a write error or because the disk
backing the mirror element was removed. They result in a generation ID bump
on all active elements of the mirror, so we can safely disconnect the mirror
component rather than destroy it.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7750
These are useful for testing changes to I/O error handling, and for
reproducing existing bugs in a controlled manner. The fail points are
g_mirror_regular_request_read
g_mirror_regular_request_write
g_mirror_sync_request_read
g_mirror_sync_request_write
g_mirror_metadata_write
They all effectively allow one to inject an error value into the bio_error
field of a corresponding BIO request as it is being completed.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
have the serious problem of not actually attaching the hardware they
are driving at the bus level. This causes creator(4) and machfb(4)
to attach and drive the very same hardware in parallel when both
syscons(4) and vt(4) as well as their associated hardware drivers
are built into a kernel, i. e. GENERIC, at the same time.
Also, syscons(4) and its drivers still are way superior to vt(4) and
its equivalents; unlike the syscons(4) counterparts the vt(4) drivers
don't provide hardware acceleration resulting in considerably slower
screen drawing, creator_vt(4) doesn't provide a /dev/fb node as
required by the Xorg sunffb(4) etc. In theory, vt_ofwfb(4) should be
able to handle more devices than machfb(4). However, testing shows
that it hardly works with any hardware machfb(4) isn't also able to
drive, making vt(4) and vt_ofwfb(4) not favorable for the time being
from that perspective either.
MFC after: 3 days
Use C99 designators to set the value of each slot and the nitems macro to
check for valid entries. In the process, switch to indexing by signal
number rather than signal-1 for improved clarity.
Obtained from: CheriBSD (a6053c5abf)
Sponsored by: DARPA, AFRL
Reviewed by: kib
The previous code was forcing an expensive walk in vop_stdvptocnp,
which was causing performance issues on highly contended zfs.
No objections: kib
MFC after: 2 weeks
Add routines to trigger a function level reset (FLR) of a PCI-express
device via the PCI-express device control register. This also includes
support routines to wait for pending transactions to complete as well
as calculating the maximum completion timeout permitted by a device.
Change the ppt(4) driver to reset pass through devices before attaching
to a VM during startup and before detaching from a VM during shutdown.
Reviewed by: imp, wblock (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7751
This driver supports two bindings:
- cpufreq-dt: systems which share clock and voltage across all CPUs
- arm_big_little_dt: systems which share clock and voltage across all
CPUs in a single cluster
Reviewed by: andrew, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7741
When the I/O MMU is active in bhyve, all PCI devices need valid entries
in the DMAR context tables. The I/O MMU code does a single enumeration
of the available PCI devices during initialization to add all existing
devices to a domain representing the host. The ppt(4) driver then moves
pass through devices in and out of domains for virtual machines as needed.
However, when new PCI devices were added at runtime either via SR-IOV or
HotPlug, the I/O MMU tables were not updated.
This change adds a new set of EVENTHANDLERS that are invoked when PCI
devices are added and deleted. The I/O MMU driver in bhyve installs
handlers for these events which it uses to add and remove devices to
the "host" domain.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7667
Note that this introduces an explicit 2GB limit, but this was already
implicit in variable and function argument types.
This is based on the "non-cryptanalytic attacks against freebsd
update components" anonymous gist. Further refinement is planned.
Reviewed by: allanjude, cem, kib
Obtained from: anonymous gist
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7619
This allows a pass through device to be reset to a normal device driver
on the host and reused on the host. ppt devices are now always active in
some I/O MMU domain when the I/O MMU is active, either the host domain
or the domain of a VM they are attached to.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7666
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
Reviewed by: jhb
MFC after: 1 week
format specifier for pointers when printing them out with printf(3)
MFC after: 57 days
Pointyhat to: ngie
Reported by: bz, cy, Jenkins (i386 job)
Submitted by: cy
Sponsored by: EMC / Isilon Storage Division
Other files including pci_host_generic.h failed to compile
due to missing declaration of enum pci_id_type.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7561
ThunderX units in the netperf cluster.
Approved by: jkim
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7252
using shell redirections instead of having gzip(1) to decide what
file to open.
Issue reported in the "non-cryptanalytic attacks against freebsd
update components" anonymous gist.
Reviewed by: allanjude, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7653
This is being done to clearly distinguish the libkqueue tests
from the (soon to be imported) NetBSD tests.
MFC after: 58 days
Sponsored by: EMC / Isilon Storage Division
Split usbd_xfer_status() check:
- Check xfer length: must be longer, than Rx descriptor size.
- Check frame size: must be shorter than xfer length.
- Discard too short frames.
Tested with WUSB54GC, STA/MONITOR modes.
The upstream change introduced a new load state, SPA_LOAD_CREATE,
and vdev_geom code needs to be aware of it.
Tested by: cy
MFC after: 1 week
X-MFC with: r305331
- Require root in the tcp/udp subtests (it's needed on FreeBSD when
registering services).
- Skip the tests if service registration fails.
MFC after: 59 days
X-MFC with: r305358
Reported by: Jenkins, rodrigc
Sponsored by: EMC / Isilon Storage Division
This adds bhnd(4) bus-level support for querying backplane interrupt vector
routing, and delegating machine/bridge-specific interrupt handling to the
concrete bhnd(4) driver implementation.
On bhndb(4) bridged PCI devices, we provide the PCI/MSI interrupt directly
to attached cores.
On MIPS devices, we report a backplane interrupt count of 0, effectively
disabling the bus-level interrupt assignment. This allows mips/broadcom
to temporarily continue using hard-coded MIPS IRQs until bhnd_mips PIC
support is implemented.
Reviewed by: mizhka
Approved by: adrian (mentor, implicit)
Broadcom Intensi-fi chipsets provided a common set of IP cores; on PCI/PCIe
devices, the USB11 host controller is left floating.
Approved by: adrian (mentor, implicit)
This patch adds driver implementation for BHND USB core. Driver has been
imported from ZRouter project with small adaptions for FreeBSD 11.
Also it's enabled for BroadCom MIPS74k boards by default. It's fully tested
on Asus boards (RT-N16: external USB, RT-N53: USB bus between SoC and WiFi
chips).
Reviewed by: adrian (mentor), ray
Approved by: adrian (mentor)
Obtained from: ZRouter
Differential Revision: https://reviews.freebsd.org/D7781
Sync libarchive with vendor
Vendor issues fixed:
PR #777: Multiple bugfixes for setup_acls()
This includes a bugfix for a bug that caused ACLs not to be read properly
for files and directories inside subdirectories and as a result not being
stored or being incorrectly stored in tar archives.
MFC after: 3 days
