It overflows witness.
Shorten the names of some nfs mutexes.
Reported and tested by: pho
No objections from: rmacklem, mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In the mmcsd layer use this value to populate disk->d_ident. Also set
disk->d_descr to the full set of card identification info (includes vendor,
model, manufacturing date, etc).
Previously there was a race condition between the address addition
and associating it with the CARP which resulted in the interface
MAC, instead of the CARP MAC, being used for a brief amount of time.
This caused "is using my IP address" warnings as well as data being
sent to the wrong machine due to incorrect ARP entries being recorded
by other devices on the network.
pmap_unwire(), the call to MOEA64_PVO_TO_PTE() must be performed before
any changes are made to the PVO. Otherwise, MOEA64_PVO_TO_PTE() will
panic.
Reported by: andreast
* Implements Start Stop Unit for SATA direct-attach devices in IR mode to avoid
data corruption.
* Use CAM_DEV_NOT_THERE instead of CAM_SEL_TIMEOUT and CAM_TID_INVALID
Obtained from: LSI
MFC after: 2 weeks
features. If bootverbose is enabled, a detailed list is provided;
otherwise, a single-line summary is displayed.
- Add read-only sysctls for optional VT-x capabilities used by bhyve
under a new hw.vmm.vmx.cap node. Move a few exiting sysctls that
indicate the presence of optional capabilities under this node.
CR: https://phabric.freebsd.org/D498
Reviewed by: grehan, neel
MFC after: 1 week
framebuffer drivers. This lets ofwfb work with xf86-video-scfb and makes
the driver much more generic and less PCI-centric. This changes some
user-visible behavior and will require updates to the xorg-server port
on PowerPC when using ATI graphics cards.
some parts of the checks are in fact redundand in the surrounding
code, and it is more clear what the conditions are by direct testing
of the flags. Two of the three macros were only used in assertions.
In vnlru_free(), all relevant parts of vholdl() were already inlined,
except the increment of v_holdcnt itself. Do not call vholdl() to do
the increment as well, this allows to make assertions in
vholdl()/vhold() more strict.
In v_incr_usecount(), call vholdl() before incrementing other ref
counters. The change is no-op, but it makes less surprising to see
the vnode state in debugger if interrupted inside v_incr_usecount().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Increase default ARC buf_hash_table size. When typical block size is small,
the hash table could be too small, which would lead to long hash chains and
limit performance for cached reads.
A new loader tunable, vfs.zfs.arc_average_blocksize, have been added which
allows users to override the default assumption of average (typical) block
size. Old default was 65536 (64 KiB) and new default is 8192 (8 KiB).
Illumos issue:
5034 ARC's buf_hash_table is too small
MFC after: 2 weeks
Change dn->dn_dbufs from linked list to AVL tree.
Illumos issues:
4873 zvol unmap calls can take a very long time for larger datasets
MFC after: 2 weeks
code behave more like it is on Solaris.
Reported by: avg
Reviewed by: avg, mav (but bugs are mine)
Differential Revision: https://phabric.freebsd.org/D457
moved from the stack into the tag structure. In retrospect that was a bad
idea, because nothing protects that array from concurrent access by
multiple threads.
This change moves the array to the map structure (actually it's allocated
following the structure, but all in a single malloc() call).
This also establishes a "sane" limit of 4096 segments per map. This is
mostly to prevent trying to allocate all of memory if someone accidentally
uses a tag with nsegments set to BUS_SPACE_UNRESTRICTED. If there's ever
a genuine need for more than 4096, don't hesitate to increase this (or
maybe make it tunable).
Reviewed by: cognet
triggers a need to bounce due to cacheline alignment. These buffers
are always aligned to cacheline boundaries, and even when the DMA operation
starts at an offset within the buffer or doesn't extend to the end of the
buffer, it's safe to flush the complete cachelines that were only partially
involved in the DMA. This is because there's a very strict rule on these
types of buffers that there will not be concurrent access by the CPU and
one or more DMA transfers within the buffer.
Reviewed by: cognet
functions, it has evolved to make a variety of decisions about whether
the DMA needs to bounce, so rename it to must_bounce(). Rewrite it to
perform checks outside of the ancestor loop if they're based on information
that's wholly contained within the original tag. Now the loop only checks
exclusion zones in ancestor tags.
Also, add a new function, might_bounce() which does a fast inline check
of flags within the tag and map to quickly eliminate the need to call
the more expensive must_bounce() for each page in the DMA operation.
Within the mapping loops, use map->pagesneeded != 0 as a proxy for all
the various checks on whether bouncing might be required. If no pages
were reserved for bouncing during the checks before the mapping loop,
then there's no need to re-check any of the conditions that can lead
to bouncing -- all those checks already decided there would be no bouncing.
Reviewed by: cognet
exclusion zones and phsyical memory. The phys_avail[i] entries are the
address of the first byte of ram in the region, and phys_avail[i+1]
entries are the address of the first byte of ram in the next region
(i.e., they're not included in the region that starts at phys_avail[i]).
Reviewed by: cognet
unchanging values in the phys_avail array, so do the comparisons just once
at tag creation time and set a flag to remember the result.
Reviewed by: cognet
DMA on arm can bounce for several reasons, and _bus_dma_can_bounce() only
checks for the lowaddr/highaddr exclusion ranges in the dma tag, so now
it's named exclusion_bounce(). The other reasons for bouncing are checked
by the new functions alignment_bounce() and cacheline_bounce().
Reviewed by: cognet
postponing it to zfs_vget(). zfs_root() returned vnode with the
default value of v_hash, which caused inconsistent v_hash value when
root vnode was obtained from zfs_vget().
Nullfs allocated two upper vnodes for the root zfs vnode due to
different hashes, causing consistency problems.
Reported and tested by: Harald Schmalzbauer <h.schmalzbauer@omnilan.de>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
