This will allow the NFS mount code to return a string error message
in addition to returning an error integer value.
Reviewed by: mohans
MFC after: 1 month
them unsigned I made the possible overflows hard to detect,
and it only saved 1 bit which isn't principal, even less now
that the underlying issue with the total of virtual memory has
been fixed. (For the record, it will overflow with >=2T of
VM total, with 32-bit ints used to keep counters in pages.)
- While here, fix printing of other "struct vmtotal" members
such as t_rq, t_dw, t_pw, and t_sw as they are also signed.
Reviewed by: bde
MFC after: 3 days
enables direct dispatch of the network stack from the device driver
ithread, enabling input path parallelism by default when multiple
interfaces are present.
The strategy for network stack parallelism is something being actively
discussed, and this is just one of several possible (and perfectly
reasonable) strategies, but has the distinct advantage of reducing the
number of context switches and preemptions significantly, resulting in
higher efficiency in many cases. In some caes, this may reduce
network stack parallelism due to work not being deferred from the
ithread to the netisr. Therefore, the strategy may change in the
future, but this offers a reasonable first pass and enabling
parallelism while maintaining strong ordering.
Hopefully this will trigger lots of nice new bugs.
This change is not intended for MFC.
is also returned by pthread_detach() if a thread was already
detached, the error code was already documented:
> [EINVAL] The implementation has detected that the value speci-
> fied by thread does not refer to a joinable thread.
via the PCN_CSR_MODE register. Along with sys/dev/mii/nsphy.c 1.26
this fixes the case of certain Am79c971-based HP cards and on-board
ones in IBM machines reporting link but not actually passing any
traffic. [1]
- Add support for the internal 10baseT PHY, which actually is used on
at least said HP cards (together with an external DP83840A in a
multiple PHYs configuration). With cards that don't make use of this
internal PHY it'll also show up in FreeBSD but not cause any harm.
This is still missing support for multiple PHYs configuration using
the internal 100baseTX and/or HomePNA PHYs together with external
PHYs or multiple external PHYs though.
- In pcn_ifmedia_upd() call pcn_reset() as otherwise the Am79C971 of
at least said HP cards can wedge when switching from the internal
10baseT PHY to the external PHY. This means that we need to also
initialize and possibly start the chip again in pcn_ifmedia_upd(),
which isn't that bad though as for setting the media port the chip
has to be powered down or stopped anyway and unlike documented
doesn't take effect until the next initialization.
PR: 27995, 25959, 72966 (likely) [1]
MFC after: 2 weeks
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- In rlphy_status() just use if_dname instead of determining the name
of the parent NIC via device_get_name(device_get_parent(sc->mii_dev)).
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia().
- Fix some whitespace nits and remove commented out code that just can't
be used with RealTek PHYs.
MFC after: 2 weeks
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Don't set MIIF_NOISOLATE so qsphy(4) can be used in configurations
with multiple PHYs. There doesn't seem to be a problem with isolating
QS6612 per se nor in combination with the NICs they're used with.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia().
Obtained from: NetBSD (except for the first item)
MFC after: 2 weeks
loopback to work PCnet chips additionally need to be placed into
external loopback mode which pcn(4) doesn't do so far.
- In nsphy_service() just use if_dname instead of determining the name
of the parent NIC via device_get_name(device_get_parent(sc->mii_dev)).
- Don't set MIIF_NOISOLATE, except for when used in combination with a
NIC that wedges when isolating the PHYs, so nsphy(4) can be used in
configurations with multiple PHYs.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia() (requires the MIIF_FORCEANEG
added in sys/dev/mii/mii_physubr.c 1.26, sys/dev/mii/miivar.h 1.19).
- Implement a separate nsphy_reset(). There are two reasons for this:
1) This PHY can take an inordinate amount of time to reset if media
is attached; under fairly normal circumstances up to nearly one
second. This is because it appears to go through an implicit auto-
negotiation cycle as part of the reset.
2) During reset and auto-negotiation, the BMCR will clear the reset
bit before the process is complete. It will return 0 until the
process is complete and it's safe to access the PHY again.
This is the first of two changes required to make the combination of
Am79c971 and DP83840A found on certain HP cards and on-board in IBM
machines work.
- Fix some whitespace nits.
Based on: NetBSD (except for the first and second item)
MFC after: 2 weeks
with multiple PHYs. There doesn't seem to be a problem with isolating
LXT970 per se nor in combination with the NICs they're used with and
lxtphy(4) was already adding IFM_NONE anyway.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia().
- Fix some whitespace nits.
Obtained from: NetBSD
MFC after: 2 weeks
the BMSR contains any media at all to mii_phy_add_media(). The majority
of the drivers currently using mii_phy_add_media() were missing such a
check anyway though.
MFC after: 2 weeks
take place if IFM_AUTO is selected. This allows drivers like nsphy(4),
which need to force writing the ANAR according to the BMSR, to take
advantage of mii_phy_setmedia(). [1]
- In mii_phy_reset() once the current media is set don't isolate the PHY
corresponding to the instance of the currently selected media rather
than unconditionally not isolating the PHY corresponding to instance 0.
This saves a isolation-unisolation-cycle of the PHY corresponding to
the currently selected media for the case were it isn't instance 0.
- Fix some whitespace nits. [1]
Obtained from: NetBSD [1]
MFC after: 2 weeks
have to explicitly acquire Giant (although they need to be aware of this and
not hold any locks at that point). Remove the acquisitions of Giant in the
NFS client wrapping tprintf().
has items with CONSUMER page. For now only check for items with KEYBOARD page.
This should prevent bthidd(8) from allocating vkbd(4) keyboard for Microsoft
Bluetooth Explorer mouse.
Reported by: Eric Anderson
MFC after: 3 days
The policy is that the WARNS level should characterize the
quality of a piece of code irrespective of any conditions.
Otherwise the code doesn't deserve the WARNS level assigned.
Requested by: ru
Add two linprocfs entries for Linux IPC:
/proc/sys/kernel/msgmni -> kern.ipc.msgmni
/proc/sys/kernel/sem -> kern.ipc.semmsl
kern.ipc.semmns
kern.ipc.semopm
kern.ipc.semmni
This fixes msgget03 and semget05 from Linux Test Project (LTP) test suite.
msgctl08 and msgctl09 also use /proc/sys/kernel/msgmni but another fix is
required from p4 (Change 110179).
Requested by: netchild
file. Leave the loser's lock(s) initialized, so the reclaim logic can
unconditionally destroy them when that race occurs (or if the vfs hash
insert happened to fail for some other reason). Thanks to ups@ for a
careful review of the code.
Reported by : Kris Kennaway
an URQ_REQUEST when DMA segments are passed to usbd_start_transfer();
when the request doesn't include the optional data buffer the size of
the transfer (xfer->length) is 0, in which case usbd_transfer() won't
create a DMA map but call usbd_start_transfer() with no DMA segments.
With the previous change this could result in the bus_dmamap_sync()
implementation dereferencing the NULL-pointer passed as the DMA map
argument.
While at it fix what appears to be a typo in usbd_start_transfer();
in order to determine wheter usbd_start_transfer() was called with
DMA segments check whether the number of segments is > 0 rather than
the pointer to them being > 0.
OK'ed by: imp
- Move mentionings of required drivers to the SYNOPSIS where they belong
- Remove cruft (XiG, sheesh) from the EXAMPLES section and re-arrange things to make
somewhat more sense
- Fix an Xref to manpage from ports to mention the corresponsing port
- Remove commented out HISTORY section header
MFC after: 3 days
for catching general regressions in future. Unfortunately,
it still displays some problems at WARNS=6 on architectures
with stricter alignment requirements, e.g., ia64.
we set and use xtp; if idx is 1, we set and use xip; the other cases
are impossible. However, GCC cannot see that xip and xtp are always
initialized before use because they are initialized and used in
different if/else blocks. So setting them to NULL at the very
beginning won't hurt.
* Correct a signed/unsigned problem that broke handling of files >2G.
* Implement "skip" support for much faster "tar -t".
Thanks to: Robert Sciuk for sending me a DVD that illustrated the first problem
ULLONG_MAX is not less than 2^64-1; and uintmax_t
cannot be more narrow than unsigned long long.
This allows for scale factors up to Exa inclusively.
Use plain int for the scale index to be consistent
with ifcmds.c and enum.
