Commit Graph

961 Commits

Author SHA1 Message Date
Andriy Gapon
3f581c18ec scsi_cd: silence READ_TOC errors in CDIOREADTOCHEADER ioctl
An optical disk may not have a TOC (e.g. for blank media) and userland
software may legitimately try to use CDIOREADTOCHEADER to find out about
the TOC.

Silence from:	scsi@
MFC after:	10 days
2011-05-07 10:06:43 +00:00
Alexander Motin
ce6cf987d8 Do not report legacy unit numbers (do not create legacy aliases) for disks
on port multiplier ports above first two. They don't fit into ATA_STATIC_ID
scheme and so can't be mapped properly. No need to pollute dev.
2011-05-03 13:16:02 +00:00
Alexander Motin
da396db2d2 Make CAM_DEBUG_CDB also dump ATA commands in addition to SCSI. 2011-04-29 07:14:37 +00:00
Alexander Motin
0d307e0905 - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
Alexander Motin
cf2b9a5f0f Add basic support for DMA-capable ATA disks on DMA-incapable controller.
This is really rare situation these days, but still may happen in embedded.
2011-04-20 13:27:50 +00:00
Alexander Motin
20790a105d Remove always false "< 0" check for unsgined int variable. This check is
also duplicate, as the value was already checked for 0 before decrementing.

Reported by:	rpaulo
2011-04-18 14:34:10 +00:00
Alexander Motin
803cd701f3 Remove some used variables.
Found with:	Clang Static Analyzer
2011-04-18 14:15:52 +00:00
Alexander Motin
cfba3bd7a0 Remove some used variables.
Found with:	Clang Static Analyzer
2011-04-18 13:59:56 +00:00
Jaakko Heinonen
9b92242710 Move a comment to the right place. The rearrange done in r208928 left
the comment to a wrong place.
2011-04-16 08:38:11 +00:00
Jaakko Heinonen
e9b3fc67e0 Move TUNABLE_INT_FETCH() out of the SIM lock to avoid sleeping while
holding the lock. The fix is analogous to r220618 for ada(4).

Reviewed by:	mav
2011-04-16 06:54:41 +00:00
Alexander Motin
c3d0d168ae Make ada(4) driver put ATA disks into sleep state on suspend.
Submitted by:	jkim (original version)
2011-04-15 07:07:29 +00:00
Alexander Motin
b8b6b5d37a Make CAM report devices with ATA/SATA transport to devstat(9) as IDE. 2011-04-14 21:25:32 +00:00
Alexander Motin
781338b6fd Fix typo in write_cache tunable name and move TUNABLE_INT_FETCH() out of
the SIM lock to fix WITNESS warning.

Reported by:	jh
2011-04-14 09:11:50 +00:00
Alexander Motin
276b083449 Properly log few more ATA commands used by the kernel. 2011-04-14 08:17:45 +00:00
Alexander Motin
8d169381e4 Improve SATA Asynchronous Notification feature support in CAM:
- make SATA SIMs announce capabilities to handle SDB with Notification bit;
 - make PMP driver honor this SIMs capability;
 - make SATA XPT to negotiate and enable this feature for ATAPI devices.

This feature allows supporting SATA ATAPI devices to inform system about
some events happened, that may require attention. In my case this allows
LG GH22LS50 SATA DVR-RW drive to report tray open/close events. Events
reported to CAM in form of AC_SCSI_AEN async. Further they could be used
as a hints for checking device status and reporting media change to upper
layers, for example, via spoiling mechanism of GEOM.
2011-04-13 16:20:54 +00:00
Alexander Motin
e3a6d3a4bf - Add kern.cam.ada.X.write_cache tunables/sysctls to control write caching
on per-device basis.
- While adding support for per-device sysctls, merge from graid branch
support for ADA_TEST_FAILURE kernel option, which opens few more sysctl,
allowing to simulate read and write errors for testing purposes.
2011-04-08 14:42:29 +00:00
Alexander Motin
f513d14ca4 Make ada(4) driver to control device write cache, same as ata(4) does.
Add kern.cam.ada.write_cache sysctl/tunable to control it alike hw.ata.wc.
2011-04-07 08:17:53 +00:00
Matt Jacob
753e7ed072 Don't automatically send a START UNIT to sequential access devices-
this might cause them to load the tape unintentionally.

Reviewed by:	gibbs
MFC after:	1 month
2011-03-03 18:28:21 +00:00
Nathan Whitehorn
ded66df8cb Missed a file in r219056: add disk description for da(4). 2011-02-26 23:30:32 +00:00
Nathan Whitehorn
65cb6238bd Add the disk ident and a human-meaningful description (here, the disk model
string) to the geom_disk config XML so that they are easily accessible from
userland.

MFC after:	1 week
2011-02-26 14:58:54 +00:00
Alexander Leidinger
de5b19526b Add some FEATURE macros for various features (AUDIT/CAM/IPC/KTR/MAC/NFS/NTP/
PMC/SYSV/...).

No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.

Sponsored by:   Google Summer of Code 2010
Submitted by:   kibab
Reviewed by:    arch@ (parts by rwatson, trasz, jhb)
X-MFC after:    to be determined in last commit with code from this project
2011-02-25 10:11:01 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Alexander Motin
025e2c1221 In addition to r217444 ignore also ATA status errors on DMA Auto-Activation
enabling request. Some HP disks reported to return ABORT error there while
declaring support for this feature.
2011-01-26 06:57:48 +00:00
Alexander Motin
958e4a696f Make device initialization sequence shorter when possible. Do not enable/
disable already enabled/disabled SATA features.
2011-01-26 06:37:51 +00:00
Matthew D Fleming
f8e4b4ef49 sysctl(8) should use the CTLTYPE to determine the type of data when
reading.  (This was already done for writing to a sysctl).  This
requires all SYSCTL setups to specify a type.  Most of them are now
checked at compile-time.

Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).

Succested by:	bde
2011-01-19 17:04:07 +00:00
Alexander Motin
26bdaeddd8 Some old WD SATA disks report supported and enabled device-initiated
interface power management, but return ABORT error on attempt to disable
it. Make CAM SATA probe sequence ignore this error, as it is not fatal.
2011-01-15 09:43:25 +00:00
Matthew D Fleming
376d34d03a Add a 64-bit hex-printed sysctl(9) since there is at least one place in
the code that wanted it.  It is named X64 rather than XQUAD since the
quad name is a historical abomination that should not be perpetuated.
2011-01-13 18:20:33 +00:00
Matthew D Fleming
240577c2a7 Fix up a few more sysctl(9) mis-typing found in various LINT builds. 2011-01-13 18:20:27 +00:00
John Baldwin
58ccf5b41c Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by:	bde
2011-01-11 13:59:06 +00:00
Kenneth D. Merry
7c103dde1e Fix a few issues related to the XPT_GDEV_ADVINFO CCB.
camcontrol.c:	In buildbusdevlist(), don't attempt to get call
		getdevid() for an unconfigured device, even when the
		verbose flag is set.  The cam_open_btl() call will almost
		certainly fail.

		Probe for the buffer size when issuing the XPT_GDEV_ADVINFO
		CCB.  Probing for the buffer size first helps us avoid
		allocating the maximum buffer size when it really may not
		be necessary.  This also helps avoid errors from
		cam_periph_mapmem() if we attempt to map more than MAXPHYS.

cam_periph.c:	In cam_periph_mapmem(), if the XPT_GDEV_ADVINFO CCB
		shows a bufsiz of 0, we don't have anything to map,
		so just return.

		Also, set the maximum mapping size to MAXPHYS
		instead of DFLTPHYS for XPT_GDEV_ADVINFO CCBs,
		since they don't actually go down to the hardware.

scsi_pass.c:	Don't bother mapping the buffer in XPT_GDEV_ADVINFO
		CCBs if bufsiz is 0.
2010-12-10 21:38:51 +00:00
Kenneth D. Merry
06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
Alexander Motin
c2b82f3e61 If HBA doesn't report user-enabled SATA capabilies (like ATA_CAM wrapper) -
handle all of them as disabled. This was original cause of the problem,
workarounded by r215453.

MFC after:	1 week
2010-11-18 13:38:33 +00:00
Alexander Motin
0bb3f1d367 When requesting sense data for SIM not doing it automatically (such as
ATAPI or USB), request only as much data as requested by consumer.
On the way back -- report how much sense data we have actually received.
2010-11-08 15:59:41 +00:00
Alexander Motin
a4bd51a562 Make da driver to handle some probably broken Android devices, returning
zero media and sector size instead of "Medium not present" error,
until some confirmation button is tapped on device.
2010-10-24 18:53:16 +00:00
Rebecca Cran
fd104c151b Mostly revert r203420, and add similar functionality into ada(4) since the
existing code caused problems with some SCSI controllers.

A new sysctl kern.cam.ada.spindown_shutdown has been added that controls
whether or not to spin-down disks when shutting down.
Spinning down the disks unloads/parks the heads - this is
much better than removing power when the disk is still
spinning because otherwise an Emergency Unload occurs which may cause damage
to the actuator.

PR:	kern/140752
Submitted by:   olli
Reviewed by:	arundel
Discussed with: mav
MFC after:	2 weeks
2010-10-24 16:31:57 +00:00
Alexander Motin
0069293b2b Decrease poll interval from 1000 to 100us. This significantly reduces
kernel dump time, especially with minidump.
2010-09-22 05:17:18 +00:00
Matthew D Fleming
81059816c0 Use destroy_dev_sched(9) instead of destroy_dev(9) in passcleanup() as
it is indirectly a d_close method.

Prompted by:	kib
Reviewed by:	mav
MFC after:	2 weeks
2010-09-20 19:42:14 +00:00
Justin T. Gibbs
f03f7a0ca3 Correct bioq_disksort so that bioq_insert_tail() offers barrier semantic.
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.

The barrier semantics of bioq_insert_tail() were broken in two ways:

 o In bioq_disksort(), an added bio could be inserted at the head of
   the queue, even when a barrier was present, if the sort key for
   the new entry was less than that of the last queued barrier bio.

 o The last_offset used to generate the sort key for newly queued bios
   did not stay at the position of the barrier until either the
   barrier was de-queued, or a new barrier (which updates last_offset)
   was queued.  When a barrier is in effect, we know that the disk
   will pass through the barrier position just before the
   "blocked bios" are released, so using the barrier's offset for
   last_offset is the optimal choice.

sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
	o Update last_offset in bioq_insert_tail().

	o Only update last_offset in bioq_remove() if the removed bio is
	  at the head of the queue (typically due to a call via
	  bioq_takefirst()) and no barrier is active.

	o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
	  set prev to the barrier and cur to it's next element.  Now that
	  last_offset is kept at the barrier position, this change isn't
	  strictly necessary, but since we have to take a decision branch
	  anyway, it does avoid one, no-op, loop iteration in the while
	  loop that immediately follows.

	o In bioq_disksort(), bypass the normal sort for bios with the
	  BIO_ORDERED attribute and instead insert them into the queue
	  with bioq_insert_tail().  bioq_insert_tail() not only gives
	  the desired command order during insertion, but also provides
	  barrier semantics so that commands disksorted in the future
	  cannot pass the just enqueued transaction.

sys/sys/bio.h:
	Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.

sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
	Use an ordered command for SCSI/ATA-NCQ commands issued in
	response to bios with the BIO_ORDERED flag set.

sys/cam/scsi/scsi_da.c
	Use an ordered tag when issuing a synchronize cache command.

	Wrap some lines to 80 columns.

sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
	Mark bios with the BIO_FLUSH command as BIO_ORDERED.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 month
2010-09-02 19:40:28 +00:00
Matt Jacob
be55a6bd2a Revert r211434. Offline discussions have convinced me that this should
be left alone for now.
2010-08-20 17:20:05 +00:00
Matt Jacob
c9c87edbc3 Now is as good a time as any to find out if we induce breakage
by issueing aborts for any pending commands when we're decommssioning
a disk.

MFC after:	3 months
2010-08-17 17:11:15 +00:00
Benedict Reuschling
104fad2860 Fix two (very common) occurrences of s/sytem/system in comments.
Approved by:    mav
MFC after:      3 days
2010-08-02 18:06:49 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Alexander Motin
25a519a918 ATA device reset starts probe sequence from the beginning. If reset caused
by timeout/error of one of probe commands, process may continue infinitely.
Make CAM ATA more robust to faulty devices and false positive detections,
abort probe after two restarts on timeouts or ten on other errors.
2010-07-06 19:05:41 +00:00
Matt Jacob
6e4b813833 Don't lock buses around a call to xptperiphlistmatch- the buses will be
locked at appropriate places.

MFC after:	1 week
X-MFC:		208752
2010-06-29 17:10:55 +00:00
Kenneth D. Merry
37f5dbdfec For the target port groups structures, don't allocate the initial element.
This makes things easier for target implementations to calculate how many
elements they need to allocate.

Discussed with:	mjacob, gibbs
MFC after:	1 week
2010-06-14 22:02:18 +00:00
Matt Jacob
63ebd216e7 Rearrange how things are done to avoid dereferencing stale pointers in
the case of immediate unconfigure after configure. Hold the periph an
extra count while we have the task to create sysctl context outstanding
so that the periph doesn't go away unexpectedly.

Sponsored by:	Panasas
Reviewed by:	scsi@
MFC after:	1 month
2010-06-08 22:46:44 +00:00
Matt Jacob
8c52d7f70c One byte off for scsi_target_group cdb.
MFC after:	2 weeks
2010-06-08 17:44:49 +00:00
Matt Jacob
82b361b11b Implement the usage of Report Luns as part of SCSI probing for SCP3 or
better devices. This can be disabled on a per-device basis using quirks as
well.

This also handles the case where there is actually no connected LUN 0
(which can definitely be the case for storage arrays).

Reviewed by:	scsi@
MFC after:	1 month
2010-06-08 16:17:25 +00:00
Matt Jacob
36af9f04a3 Make additional definitions up to and including SPC-4. Add in definitions
for REPORT and SET TARGET PORT GROUP commands (foundations for future work).

Regularize opcodes to be upper case hex.

Pick *one* of tab or space after #define (tab) and stick with that.

MFC after:	2 weeks
2010-06-08 05:14:18 +00:00
Matt Jacob
c8381fba8c redfacedly noting a missing part of a patch.
Pointy Hat To:	Me
MFC after:	2 Week
X-MFC:		208896
2010-06-07 22:43:37 +00:00