Previously, mlockall(2) usage would leak MAP_FUTUREWIRE of the process's
vmspace::vm_map and subsequent processes would wire all of their memory.
Coupled with a wired-page leak in vm_fault_unwire(), this would run the
system out of free pages and cause programs to randomly SIGBUS when
faulting in new pages.
(Note that this is not the fix for the latter part; pages are still
leaked when a wired area is unmapped in some cases.)
Reviewed by: alc
PR kern/62930
allocation and deallocation. This flag's principal use is shortly after
allocation. For such cases, clearing the flag is pointless. The only
unusual use of PG_ZERO is in vfs_bio_clrbuf(). However, allocbuf() never
requests a prezeroed page. So, vfs_bio_clrbuf() never sees a prezeroed
page.
Reviewed by: tegge@
caller to vm_page_grab(). Although this gives VM_ALLOC_ZERO a
different meaning for vm_page_grab() than for vm_page_alloc(), I feel
such change is necessary to accomplish other goals. Specifically, I
want to make the PG_ZERO flag immutable between the time it is
allocated by vm_page_alloc() and freed by vm_page_free() or
vm_page_free_zero() to avoid locking overheads. Once we gave up on
the ability to automatically recognize a zeroed page upon entry to
vm_page_free(), the ability to mutate the PG_ZERO flag became useless.
Instead, I would like to say that "Once a page becomes valid, its
PG_ZERO flag must be ignored."
would actually map the file with read access enabled. According to
http://www.opengroup.org/onlinepubs/007904975/functions/mmap.html this is
an error. Similarly, an madvise(..., MADV_WILLNEED) would enable read
access on a virtual address range that was PROT_NONE.
The solution implemented herein is (1) to pass a vm_prot_t to
vm_map_pmap_enter() describing the allowed access and (2) to make
vm_map_pmap_enter() responsible for understanding the limitations of
pmap_enter_quick().
Submitted by: "Mark W. Krentel" <krentel@dreamscape.com>
PR: kern/64573
move its declaration to the machine-dependent header file on those
machines that use it. In principle, only i386 should have it.
Alpha and AMD64 should use their direct virtual-to-physical mapping.
- Remove pmap_kenter_temporary() from ia64. It is unused. Approved
by: marcel@
the reduction of the pager map's size by 8M bytes. In other words, eight
megabytes of largely wasted KVA are returned to the kernel map for use
elsewhere.
vm_mmap_vnode function, where we can safely check for a special /dev/zero
case. Rev. 1.180 has reordered checks and introduced a regression.
Submitted by: alc
Was broken by: kan
to mmap it PROT_EXEC. This also depends on the architecture, as some
architextures (e.g. i386) do not distinguish between read and exec pages
Inspired by: http://linux.bkbits.net:8080/linux-2.4/cset@1.1267.1.85
Reviewed by: alc
pmap. For the kernel pmap, Giant is not required. In general, for
other pmaps, Giant is required by i386's pmap_pte() implementation.
Specifically, the use of PMAP2/PADDR2 is synchronized by Giant.
Note: In principle, updates to the kernel pmap's wired count could be
lost without Giant. However, in practice, we never use the kernel
pmap's wired count. This will be resolved when pmap locking appears.
- With the above change, cpu_thread_clean() and uma_large_free() need
not acquire Giant. (The first case is simply the revival of
i386/i386/vm_machdep.c's revision 1.226 by peter.)
ever since alpha/alpha/pmap.c revision 1.81 introduced the list allpmaps,
there has been no reason for having this function on Alpha. Briefly,
when pmap_growkernel() relied upon the list of all processes to find and
update the various pmaps to reflect a growth in the kernel's valid
address space, pmap_init2() served to avoid a race between pmap
initialization and pmap_growkernel(). Specifically, pmap_pinit2() was
responsible for initializing the kernel portions of the pmap and
pmap_pinit2() was called after the process structure contained a pointer
to the new pmap for use by pmap_growkernel(). Thus, an update to the
kernel's address space might be applied to the new pmap unnecessarily,
but an update would never be lost.
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.
Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.
Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.
Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.
Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.
Tested by: Cy Schubert <Cy.Schubert AT komquats.com>
unnecessary and wrong. While it is necessary to verify that the page is
still free after dropping and reacquiring the free page queue lock, the
physical contiguity of the page can not change, making this check
unnecessary. This check was wrong in that it could cause an out-of-bounds
array access.
Tested by: rwatson
vm_page_free() is called. The problem with holding this lock is that it is
a spin lock and vm_page_free() may attempt the acquisition of a different
default-type lock.
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
swap_pager_putpages()'s buffer completion code. Note: the only
difference between swp_pager_sync_iodone() and bdone(), aside from
the locking in the latter, was the unnecessary clearing of B_ASYNC.
- Remove an unnecessary pmap_page_protect() from
swp_pager_async_iodone().
Reviewed by: tegge
result in a panic "vm_page_cache: caching a dirty page, ...": Access to the
page must be restricted or removed before calling vm_page_cache(). This
race condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
MFC after: 7 days
panic "vm_page_cache: caching a dirty page, ...": Access to the page must
be restricted or removed before calling vm_page_cache(). This race
condition is identical in nature to that which was addressed by
vm_pageout.c's revision 1.251 and vm_page.c's revision 1.275.
Reviewed by: tegge
MFC after: 7 days
could result in a panic "vm_page_cache: caching a dirty page, ...":
Access to the page must be restricted or removed before calling
vm_page_cache(). This race condition is identical in nature to that
which was addressed by vm_pageout.c's revision 1.251.
- Simplify the code surrounding the fix to this same race condition
in vm_pageout.c's revision 1.251. There should be no behavioral
change. Reviewed by: tegge
MFC after: 7 days
shown that it is not useful.
Rename the relative count g_access_rel() function to g_access(), only
the name has changed.
Change all g_access_rel() calls in our CVS tree to call g_access() instead.
Add an #ifndef BURN_BRIDGES #define of g_access_rel() for source
code compatibility.
the added comment for low-level details.) The effect of this race
condition is a panic "vm_page_cache: caching a dirty page, ..."
Reviewed by: tegge
MFC after: 7 days
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
when uma_reclaim() was called. This was introduced when the zone
working-set algorithm was removed in favor of using the per cpu caches
as the working set.
"scheduler" here has very little to do with scheduling. It is actually
the swapper, and it really must be the last SYSINIT'ed item like its
comment says, since proc0 metamorphoses into swapper by calling
scheduler() last in mi_start(), and scheduler() never returns.. Rev.1.29
of subr_4bsd.c broke this by adding another SI_ORDER_FIRST item
(kproc_start() for schedcpu_thread() onto the SI_SUB_RUN_SCHEDULER_LIST.
The sorting of SYSINITs with identical orders (at all levels) is
apparently nondeterministic, so this resulted in schedule() sometimes
being called second last and schedcpu_thread() not being called at all.
This quick fix just changes the code to almost match the comment
(SI_ORDER_FIRST -> SI_ORDER_ANY). "LAST" is misspelled "ANY", and
there is no way to ensure that there is only 1 very lst SYSINIT.
A more complete fix would remove the SYSINIT obfuscation.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
full state. (When swap is added their state will change appropriately.)
2. Set swap_pager_full and swap_pager_almost_full to the full state when
the last swap device is removed.
Combined these changes eliminate nonsense messages from the kernel on swap-
less machines.
Item 2 submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Prodding by: phk
free pages queue. This is presently needed by contigmalloc1().
- Move a sanity check against attempted double allocation of two pages
to the same vm object offset from vm_page_alloc() to vm_page_insert().
This provides better protection because double allocation could occur
through a direct call to vm_page_insert(), such as that by
vm_page_rename().
- Modify contigmalloc1() to hold the mutex synchronizing access to the
free pages queue while it scans vm_page_array in search of free pages.
- Correct a potential leak of pages by contigmalloc1() that I introduced
in revision 1.20: We must convert all cache queue pages to free pages
before we begin removing free pages from the free queue. Otherwise,
if we have to restart the scan because we are unable to acquire the
vm object lock that is necessary to convert a cache queue page to a
free page, we leak those free pages already removed from the free queue.
vm object hasn't changed, the desired page will be at or near the root
of the vm object's splay tree, making vm_page_lookup() cheap. (The only
lock required for vm_page_lookup() is already held.) If, however, the
vm object has changed and retry was requested, eliminating the generation
check also eliminates a pointless acquisition and release of the page
queues lock.
This guard page would have trapped the problems with the MFC of the PAE
support to RELENG_4 at an earlier point in the sequence of events.
Submitted by: tegge
pmap_init(). Such a large preallocation is unnecessary and wastes
nearly eight megabytes of kernel virtual address space per gigabyte
of managed physical memory.
- Increase UMA_BOOT_PAGES by two. This enables the removal of
pmap_pv_allocf(). (Note: this function was only used during
initialization, specifically, after pmap_init() but before
pmap_init2(). During pmap_init2(), a new allocator is installed.)
mincore(2) should check that the page is valid, not just allocated.
Otherwise, it can return a false positive for a page that is not yet
resident because it is being read from disk.
between vm_map and vnode locks is that vm_map locks are acquired first. In
revision 1.150 mmap(2) was changed to pass a locked vnode into vm_mmap().
This creates a lock-order reversal when vm_mmap() calls one of the vm_map
routines that acquires a vm_map lock. The solution implemented herein is
to release the vnode lock in mmap() before calling vm_mmap() and reacquire
this lock if necessary in vm_mmap().
Approved by: re (scottl)
Reviewed by: jeff, kan, rwatson
1) mp_maxid is a valid FreeBSD CPU ID in the range 0 .. MAXCPU - 1.
2) For all active CPUs in the system, PCPU_GET(cpuid) <= mp_maxid.
Approved by: re (scottl)
Tested on: i386, amd64, alpha
was equal to MAXCPU, we would overrun the pcpu_mtx array because maxcpu
was calculated incorrectly.
- Add some more debugging code so that memory leaks at the time of
uma_zdestroy() are more easily diagnosed.
Approved by: re (rwatson)
occurs when kmem_malloc() fails to allocate a sufficient number of vm
pages. Specifically, we avoid the lock-order reversal by not grabbing
Giant around pmap_remove() if the map is the kmem_map.
Approved by: re (jhb)
Reported by: Eugene <eugene3@web.de>
on non-VCHR vnodes. This fixes a panic when reading data from files on a
filesystem with a small (less than a page) block size.
PR: 59271
Reviewed by: alc
- Return EBUSY if the region was wired by mlock(2) and MS_INVALIDATE
is specified to msync(2). This is required by the Open Group Base
Specifications Issue 6.
- vm_map_sync() doesn't return KERN_FAILURE. Thus, msync(2) can't
possibly return EIO.
- The second major loop in vm_map_sync() handles sub maps. Thus,
failing on sub maps in the first major loop isn't necessary.
must return EINVAL if size is zero. Submitted by: tegge
- In order to avoid a race condition in multithreaded applications, the
check and removal operations by munmap(2) must be in the same critical
section. To accomodate this, vm_map_check_protection() is modified to
require its caller to obtain at least a read lock on the map.
if we drop into the pmap or vnode layers.
- Migrate the handling of zero-length msync(2)s into vm_map_sync() so that
multithread applications can't change the map between implementing the
zero-length hack in msync(2) and reacquiring the map lock in
vm_map_sync().
Reviewed by: tegge
that msync(2) is its only caller.
- Migrate the parts of the old vm_map_clean() that examined the internals
of a vm object to a new function vm_object_sync() that is implemented in
vm_object.c. At the same, introduce the necessary vm object locking so
that vm_map_sync() and vm_object_sync() can be called without Giant.
Reviewed by: tegge
destination objects are locked on entry and exit. Add comments to
the callers noting that the locks can be released by swap_pager_copy().
- Remove several instances of GIANT_REQUIRED.
the rstack functionality:
1. Fix a KASSERT that tests for the address to be above the upward
growable stack. Typically for rstack, the faulting address can be
identical to the record end of the upward growable entry, and
very likely is on ia64. The KASSERT tested for greater than, not
greater equal, so whenever the register stack had to be grown
the assertion fired.
2. When we grow the upward growable stack entry and adjust the
unlying object, don't forget to adjust the size of the VM map.
Not doing so would trigger an assert in vm_mapzdtor().
Pointy hat: marcel (for not testing with INVARIANTS).
of lock acquires and releases performed.
- Move an assertion from vm_object_collapse() to vm_object_zdtor()
because it applies to all cases of object destruction.
vm_pageout_page_stats() from Giant.
- Modify vm_pager_put_pages() and vm_pager_page_unswapped() to expect the
vm object to be locked on entry. (All of the pager routines now expect
this.)
vm_pageout_scan(). Rationale: I don't like leaving a busy page in the
cache queue with neither the vm object nor the vm page queues lock held.
- Assert that the page is active in vm_pageout_page_stats().
to the object's type field and the call to vm_pageout_flush() are
synchronized.
- The above change allows for the eliminaton of the last parameter
to vm_pageout_flush().
- Synchronize access to the page's valid field in vm_pageout_flush()
using the containing object's lock.
- Specifying VM_MAP_WIRE_HOLESOK should not assume that the start
address is the beginning of the map. Instead, move to the first
entry after the start address.
- The implementation of VM_MAP_WIRE_HOLESOK was incomplete. This
caused the failure of mlockall(2) in some circumstances.
every page. If the source entry was read-only, one or more wired pages
could be in backing objects.
- vm_fault_copy_entry() should not set the PG_WRITEABLE flag on the page
unless the destination entry is, in fact, writeable.
pmap_copy_page() et al. to accept a vm_page_t rather than a physical
address. Also, this change will facilitate locking access to the vm page's
valid field.
a long-time bug: vm_pager_get_pages() assumes that m[reqpage] contains a
valid page upon return from pgo_getpages(). In the case of the device
pager this page has been freed and replaced by a fake page. The fake page
is properly inserted into the vm object but m[reqpage] is left pointing
to a freed page. For now, update m[reqpage] to point to the fake page.
Submitted by: tegge
A small helper function pmap_is_prefaultable() is added. This function
encapsulate the few lines of pmap_prefault() that actually vary from
machine to machine. Note: pmap_is_prefaultable() and pmap_mincore() have
much in common. Going forward, it's worth considering their merger.
use the ability on ia64 to map the register stack. The orientation of
the stack (i.e. its grow direction) is passed to vm_map_stack() in the
overloaded cow argument. Since the grow direction is represented by
bits, it is possible and allowed to create bi-directional stacks.
This is not an advertised feature, more of a side-effect.
Fix a bug in vm_map_growstack() that's specific to rstacks and which
we could only find by having the ability to create rstacks: when
the mapped stack ends at the faulting address, we have not actually
mapped the faulting address. we need to include or cover the faulting
address.
Note that at this time mmap(2) has not been extended to allow the
creation of rstacks by processes. If such a need arises, this can
be done.
Tested on: alpha, i386, ia64, sparc64
systems where the data/stack/etc limits are too big for a 32 bit process.
Move the 5 or so identical instances of ELF_RTLD_ADDR() into imgact_elf.c.
Supply an ia32_fixlimits function. Export the clip/default values to
sysctl under the compat.ia32 heirarchy.
Have mmap(0, ...) respect the current p->p_limits[RLIMIT_DATA].rlim_max
value rather than the sysctl tweakable variable. This allows mmap to
place mappings at sensible locations when limits have been reduced.
Have the imgact_elf.c ld-elf.so.1 placement algorithm use the same
method as mmap(0, ...) now does.
Note that we cannot remove all references to the sysctl tweakable
maxdsiz etc variables because /etc/login.conf specifies a datasize
of 'unlimited'. And that causes exec etc to fail since it can no
longer find space to mmap things.
order to use "unmanaged" pages in the kmem object, vm_map_delete() must
unconditionally perform pmap_remove(). Otherwise, sparc64 has problems.
Tested by: jake
function, startup_alloc(), that is used for single page allocations prior
to the VM starting up. If it is used after the VM startups up, it
replaces the zone's allocf pointer with either page_alloc() or
uma_small_alloc() where appropriate.
Pointy hat to: me
Tested by: phk/amd64, me/x86
Temporarily disable the UMA_MD_SMALL_ALLOC stuff since recent commits
break sparc64, amd64, ia64 and alpha. It appears only i386 and maybe
powerpc were not broken.
working set cache. This has several advantages. Firstly, we never touch
the per cpu queues now in the timeout handler. This removes one more
reason for having per cpu locks. Secondly, it reduces the size of the zone
by 8 bytes, bringing it under 200 bytes for a single proc x86 box. This
tidies up other logic as well.
- The 'destroy' flag no longer needs to be passed to zone_drain() since it
always frees everything in the zone's slabs.
- cache_drain() is now only called from zone_dtor() and so it destroys by
default. It also does not need the destroy parameter now.
broken consumers of the malloc interface who assume that the allocated
address will be an even multiple of the size.
- Remove disabled time delay code on uma_reclaim(). The comment there said
it all. It was not an effective strategy and it should not be left in
#if 0'd for all eternity.
page_alloc() function from the slab_zalloc() function. This allows us
to unconditionally call uz_allocf().
- In page_alloc() cleanup the boot_pages logic some. Previously memory from
this cache that was not used by the time the system started was left in
the cache and never used. Typically this wasn't more than a few pages,
but now we will use this cache so long as memory is available.
by accepting the user supplied flags directly. Previously this was not
done so that flags for the same field would not be defined in two
different files. Add comments in each header instructing future
developers on how now to shoot their feet.
- Fix a test for !OFFPAGE which should have been a test for HASH. This would
have caused a panic if we had ever destructed a malloc zone. This also
opens up the possibility that other zones could use the vsetobj() method
rather than a hash.
don't cache as many items.
- Introduce the bucket_alloc(), bucket_free() functions to wrap bucket
allocation. These functions select the appropriate bucket zone to
allocate from or free to.
- Rename ub_ptr to ub_cnt to reflect a change in its use. ub_cnt now reflects
the count of free items in the bucket. This gets rid of many unnatural
subtractions by 1 throughout the code.
- Add ub_entries which reflects the number of entries possibly held in a
bucket.
count in _vm_object_allocate(). (Access to the generation count is
governed by the vm object's lock.) Note: the introduction of the
atomic increment in revision 1.238 appears to be an accident. The
purpose of that commit was to fix an Alpha-specific bug in UMA's
debugging code.
atomically extracts and holds the physical page that is associated with the
given pmap and virtual address. Such a function is needed to make the
memory mapping optimizations used by, for example, pipes and raw disk I/O
MP-safe.
Reviewed by: tegge
growable (stack) entries that not only grow down, but also grow up.
Have vm_map_growstack() take these flags into account when growing
an entry.
This is the first step in adding support for upward growable stacks.
It is a required feature on ia64 to support the register stack (or
rstack as I like to call it -- it also means reverse stack). We do
not currently create rstacks, so the upward growing is not exercised
and the change should be a functional no-op.
Reviewed by: alc
Remove the vnode and dev_t fields and replace them with a void *.
Introduce separate strategy functions for devices and regular (NFS)
vnodes.
For devices we don't need the vnode v_numoutput stuff.
Add a generic swaponsomething() function to add a swapdevice and
split the remainder of swaponvp() into swaponvp() and swapondev()
which calls this backend.
reacquire the "first" object's lock while a backing object's lock is held.
Since this is a lock-order reversal, vm_fault() uses trylock to acquire
the first object's lock, skipping the sequential access optimization in
the unlikely event that the trylock fails.
in struct vm_page are defined as u_int for 16K pages and u_long
for 32K pages, with the implied assumption that long will at least
be 64 bits wide on platforms where we support 32K pages.
UMA_ZFLAG_INTERNAL zones at all. Apparently, Wilko's alpha
was crashing while entering multi-user because, I think, we
were calculating the garbage cachefree for pcpu caches that
essentially don't exist for at least the 'zones' zone and it so
happened that we were reading from an unmapped location.
Confirmed to fix crash: wilko
Helped debug: wilko, gallatin
compare the zone element size (+1 for the byte of linkage) against
UMA_SLAB_SIZE - sizeof(struct uma_slab), and not just UMA_SLAB_SIZE.
Add a KASSERT in zone_small_init to make sure that the computed
ipers (items per slab) for the zone is not zero, despite the addition
of the check, just to be sure (this part submitted by: silby)
- UMA_ZONE_VM used to imply BUCKETCACHE. Now it implies
CACHEONLY instead. CACHEONLY is like BUCKETCACHE in the
case of bucket allocations, but in addition to that also ensures that
we don't setup the zone with OFFPAGE slab headers allocated from the
slabzone. This means that we're not allowed to have a UMA_ZONE_VM
zone initialized for large items (zone_large_init) because it would
require the slab headers to be allocated from slabzone, and hence
kmem_map. Some of the zones init'd with UMA_ZONE_VM are so init'd
before kmem_map is suballoc'd from kernel_map, which is why this
change is necessary.
- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
From alc:
Move pageable pipe memory to a seperate kernel submap to avoid awkward
vm map interlocking issues. (Bad explanation provided by me.)
From me:
Rework pipespace accounting code to handle this new layout, and adjust
our default values to account for the fact that we now have a solid
limit on allocations.
Also, remove the "maxpipes" limit, as it no longer has a purpose.
(The limit on kva usage solves the problem of having two many pipes.)
Eliminate a lot of checkes to make sure requests are not cross-device
which is unnecessary with the new layout. We know a sequential request
cannot possibly be cross-device because there is a reserved page between
the devices.
Remove a couple of comments which no longer are relevant.
to not get any cross-device I/O requests. (The unallocated first page
protecting BSD labels already gave us this, but that hack may go away
at some point in time).
Remove the check for cross-device I/O requests in swap_pager_strategy.
Move the repeated statistics updating into flushchainbuf().
swapbkva. Swapbkva mappings are explicitly managed using pmap_qenter(),
not on-demand by vm_fault(), making kmem_alloc_nofault() more appropriate.
Submitted by: tegge
Use ->bio_children to count child buffers, rather than abuse the
bio_caller1 pointer.
Expand the relevant bits of waitchainbuf() inline, this clarifies
the code a little bit.
striping to a per device round-robin algorithm.
Because of the policy of not attempting to retain previous swap
allocation on page-out, this means that a newly added swap device
almost instantly takes its 1/N share of the I/O load but it takes
somewhat longer for it to assume it's 1/N share of the pages if there
is plenty of space on the other devices.
Change the 8G total swapspace limitation to 8G per device instead
by using a per device blist rather than one global blist. This
reduces the memory footprint by 75% (typically a couple hundred
kilobytes) for the common case with one swapdevice but NSWAPDEV=4.
Remove the compile time constant limit of number of swap devices,
there is no limit now. Instead of a fixed size array, store the
per swapdev structure in a TAILQ.
Total swap space is still addressed by a 32 bit page number and
therefore the upper limit is now 2^42 bytes = 16TB (for i386).
We still do not allocate the first page of each device in order to
give some amount of protection to any bsdlabel at the start of the
device.
A new device is appended after the existing devices in the swap space,
no attempt is made to fill in holes left behind by swapoff (this can
trivially be changed should it ever become a problem).
The sysctl vm.nswapdev now reflects the number of currently configured
swap devices.
Rename vm_swap_size to swap_pager_avail for consistency with other
exported names.
Change argument type for vm_proc_swapin_all() and swap_pager_isswapped()
to be a struct swdevt pointer rather than an index.
Not changed: we are still using blists to manage the free space,
but since the swapspace is no longer fragmented by the striping
different resource managers might fare better.
concurrent invocations from acquiring the same address(es). Also, in case
of an incomplete allocation, free any allocated pages.
In collaboration with: tegge
sure that uma_dbg_free() is called if we're about to call
uma_zfree_internal() but we're asking it to skip the dtor and
uma_dbg_free() call itself. So, if we're about to call
uma_zfree_internal() from uma_zfree_arg() and skip == 1, call
uma_dbg_free() ourselves.
in sync with the backend machdep code. When cpu_thread_init() does not
have the same idea of KSTACK_PAGES as the thing that created the kstack,
all hell breaks loose.
Bad alc! no cookie! :-)
1) The race has to do with zone destruction. From the zone destructor we
would lock the zone, set the working set size to 0, then unlock the zone,
drain it, and then free the structure. Within the window following the
working-set-size set to 0 and unlocking of the zone and the point where
in zone_drain we re-acquire the zone lock, the uma timer routine could
have fired off and changed the working set size to something non-zero,
thereby potentially preventing us from completely freeing slabs before
destroying the zone (and thus leaking them).
2) The leak has to do with zone destruction as well. When destroying a
zone we would take care to free all the buckets cached in the zone, but
although we would drain the pcpu cache buckets, we would not free them.
This resulted in leaking a couple of bucket structures (512 bytes each)
per cpu on SMP during zone destruction.
While I'm here, also silence GCC warnings by turning uma_slab_alloc()
from inline to real function. It's too big to be an inline.
Reviewed by: JeffR
("UMA Zone") carefully, because it does not have pcpu caches allocated
at all. In the UP case, we did not catch this because one pcpu cache
is always allocated with the zone, but for the MP case, we were getting
bogus stats for this zone.
Tested by: Lukas Ertl <le@univie.ac.at>
- In sysctl_vm_zone use the per cpu locks to read the current cache
statistics this makes them more accurate while under heavy load.
Submitted by: tegge
so not only wastes memory but it can also cause a leak in zones that
will be destroyed later. The problem is that the slab allocation code
places newly created slabs on the partially allocated list because it
assumes that the caller will actually allocate some memory from it.
Failure to do so places an otherwise free slab on the partial slab list
where we wont find it later in zone_drain().
Continuously prodded to fix by: phk (Thanks)
contain the filedescriptor number on opens from userland.
The index is used rather than a "struct file *" since it conveys a bit
more information, which may be useful to in particular fdescfs and /dev/fd/*
For now pass -1 all over the place.
