Commit Graph

215 Commits

Author SHA1 Message Date
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Dimitry Andric
54a55725a3 In sys/dev/if_ndis/if_ndis_pccard.c, fix a bug where a garbage rid was
passed to resource_list_add().  The rid that was just returned by
bus_alloc_resource_any() should have been used instead.

Reviewed by:	jhb
MFC after:	1 week
2012-01-03 18:40:41 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Andrew Thompson
d929b72e23 Revert the ndis part of r212122, windrv_stub.c already adds a MODULE_VERSION
and this breaks loading miniport drivers from loader.conf

Reported by:	Yuri <yuri^rawbw^com>
Submitted by:	Paul B Mahol
MFC after:	3 days
2011-01-22 21:33:18 +00:00
Bernhard Schmidt
750647ad62 Don't try to free an unassigned pointer.
Submitted by:	Paul B Mahol <onemda at gmail.com>
MFC after:	1 week
2011-01-07 18:41:59 +00:00
Tijl Coosemans
4485b7e74a Fix a bug introduced in r216518. The ndis_subsys field holds the PCI
subdevice ID in addition to the subvendor ID.

Reported by:	Paul B Mahol 'onemda gmail com'
Approved by:	kib (mentor)
2010-12-19 11:14:34 +00:00
Tijl Coosemans
0e4e9e170c Use convenience functions where possible instead of accessing the PCI
configuration registers directly.

Remove pci_enable_io calls where they are redundant. The PCI bus driver
will set the right bits when the corresponding bus resource is activated.

Remove redundant pci_* function calls from suspend/resume methods. The
bus driver already saves and restores the PCI configuration.

Reviewed by:	jhb
Approved by:	kib (mentor)
2010-12-18 14:21:28 +00:00
John Baldwin
7f3384ab34 Use bus_alloc_resource_any() instead of bus_alloc_resource(). Besides being
cleaner, this fixes problems where the code was using ~0 instead of ~0ul
for the upper bound on "any" resources.

MFC after:	1 month
2010-12-16 15:19:32 +00:00
Bernhard Schmidt
96a911f614 There is no reason to call rt_ifmsg(), remove it.
Submitted by:	Paul B Mahol <onemda at gmail.com>
MFC after:	1 week
2010-10-19 19:11:36 +00:00
Rui Paulo
a6d8c83fd9 WPA_CSE_WEP104 was being incorrectly checked.
Found with:	clang
2010-10-13 14:37:52 +00:00
Andrew Thompson
910cb8feb9 Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR:		usb/125736
Submitted by:	danger, mm
Reviewed by:	hselasky
2010-09-01 23:47:53 +00:00
Martin Blapp
c2ede4b379 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
Rui Paulo
7edea21b22 len must be int, not size_t
Submitted by:	novel
2010-01-06 13:13:14 +00:00
Rui Paulo
ab925d255d Add net80211 media status reporting.
PR:		142197
Submitted by:	Paul <onemda at gmail.com>
2010-01-05 22:59:59 +00:00
Andrew Thompson
f1ea98c024 Set correct USB device description
Submitted by:	Paul B Mahol
2009-12-22 02:04:16 +00:00
Rui Paulo
2d7340428b Pass all IEs to net80211.
PR:		141376
Submitted by:	Paul <onemda at gmail.com>
MFC after:	1 week
2009-12-14 18:43:27 +00:00
John Baldwin
6b5ba0bba3 ndis_scan_results() can sleep if the scan results are not ready when
ndis_scan() is called.  However, ndis_scan() is invoked from softclock()
and cannot sleep.  Move ndis_scan_results() to the ndis' driver's scan_end
hook instead.

Submitted by:	Paul B Mahol  onemda of gmail
MFC after:	1 week
2009-12-02 16:26:18 +00:00
Rui Paulo
99081d1c61 Big style cleanup. While there remove references to FreeBSD versions
older than 6.0.

Submitted by:	Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
Coleman Kane
00e6b158be Fix a bad use of NULL instead of zero for int comparison. Sorry for the
breakage.

Submitted by:	bz, des, onemda
MFC after:	3 days
2009-10-01 11:52:06 +00:00
Coleman Kane
ed44e7ec7d style(9) fixes (always compare pointers to NULL)
Also, the previous commit to sys/dev/if_ndis/if_ndis.c also included the
removal of a call to ndis_setstate_80211 that is no longer needed.

Submitted by:	sam
MFC after:	3 days
2009-10-01 02:43:51 +00:00
Coleman Kane
d63581ec39 Correct a bug that could lead to a kernel panic if a user attempted to
perform 802.11 operations directly on the ndis0 interface before the
first VAP (wlan0) had been created. This would lead to a NULL-pointer
dereference in the kernel.

Submitted by:	Paul B. Mahol <onemda@gmail.com>
MFC after:	3 days
2009-09-30 14:28:38 +00:00
Coleman Kane
52d75a271f The ndis_scan function may be started after ndis vap have been destroyed
PR:		kern/138632
Submitted by:	Paul B. Mahol <onemda at gmail.com>
MFC after:	3 days
2009-09-22 12:36:51 +00:00
Coleman Kane
e0d12c4b94 Fix regression in last set of commits. Submitted via e-mail and then
nagged again via PR. Thank Paul for his persistence and contributions.

PR:		136895
Submitted by:	Paul B. Mahol <onemda@gmail.com>
Reviewed by:	sam (timeout, 10 days), weongyo (timeout, 10 days), me
Approved by:	re (Kostik Belousov <kostikbel@gmail.com>)
2009-07-20 23:21:19 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Coleman Kane
7c1a5c7c93 Code cleanup by moving some repetitive code into an ndis_get_bssid_list
helper function. Also, add ieee80211_announce() call for bootverbose case.

Submitted by:	Paul B. Mahol <onemda@gmail.com>
2009-06-23 14:37:07 +00:00
Andrew Thompson
ed6d949afd - Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just   usb.h and usbdi.h
2009-06-23 02:19:59 +00:00
Coleman Kane
d9cacbcf4f Replace use of ic->ic_flags with vap->iv_flags to operate on per-vap flags
for ndis 802.11 work.

Submitted by:	Paul B. Mahol <onemda@gmail.com>
2009-06-18 11:12:10 +00:00
Andrew Thompson
a593f6b8de s/usb2_/usb_|usbd_/ on all function names for the USB stack. 2009-06-15 01:02:43 +00:00
Coleman Kane
badff0e4d8 Fix an LOR
Submitted by:	Paul B. Mahol <onemda@gmail.com>
MFC after:	1 week
2009-06-10 18:00:10 +00:00
Andrew Thompson
5cdee58296 Commit missed driver_info to driver_ivar change in usb_attach_args.
Pointed out by:	kib
2009-06-08 19:56:23 +00:00
Sam Leffler
e6c3129877 fix setting of ni_txrate
Submitted by:	"Paul B. Mahol" <onemda@gmail.com>
2009-06-02 20:32:13 +00:00
Andrew Thompson
e0a69b51ac s/usb2_/usb_/ on all typedefs for the USB stack. 2009-05-29 18:46:57 +00:00
Andrew Thompson
760bc48e7e s/usb2_/usb_/ on all C structs for the USB stack. 2009-05-28 17:36:36 +00:00
Andrew Thompson
fadc970b77 Fix a few variable renames of usb2_mode outside dev/usb. 2009-05-21 02:09:12 +00:00
Sam Leffler
74904f7d58 update for net80211 rx api change 2009-05-20 23:33:40 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Andrew Thompson
a0c4317cc2 Only call ieee80211_start_all() if its a 80211 device.
Submitted by:	Paul B. Mahol
2009-04-16 23:42:00 +00:00
Sam Leffler
9fb0fccb89 o add a capability for drivers that require 802.3 encapsulation of
frames passed down through the transmit path
o mark ndis requiring 802.3 encap'd frames

Reviewed by:	"Paul B. Mahol" <onemda@gmail.com>, thompsa
2009-04-08 16:19:50 +00:00
Sam Leffler
29aca94080 Eliminate ic_myaddr so changing the mac address of a device works correctly:
o remove ic_myaddr from ieee80211com
o change ieee80211_ifattach to take the mac address of the physical device
  and use that to setup the lladdr.
o replace all references to ic_myaddr in drivers by IF_LLADDR
o related cleanups (e.g. kill dead code)

PR:		kern/133178
Reviewed by:	thompsa, rpaulo
2009-03-29 17:59:14 +00:00
Weongyo Jeong
c4f82f895d set NULL after free to avoid duplicate free.
Tested by:	Ganbold <ganbold_at_micom.mng.net>
2009-03-24 04:20:17 +00:00
Weongyo Jeong
577b9fa3f8 Some NDIS USB drivers try to call URB funcs like URB_FUNCTION_VENDOR_xxx
or URB_FUNCTION_CLASS_xxx with HAL preemption lock that means it's
non-sleepable during USB requests though usb2_do_request() requires a
sleep so it needs to send queries to the default pipe without those
interfaces to avoid sleep.
2009-03-18 02:38:35 +00:00
Weongyo Jeong
2c964f43b6 o change a lock model based on HAL preemption lock to a normal mtx.
Based on the HAL preemption lock there is a problem on SMP machines
  and causes a panic.
o When a device detached the current tactic to detach NDIS USB driver is
  to call SURPRISE_REMOVED event.  So it don't need to call
  ndis_halt_nic() again.  This fixes some page faults when some drivers
  work abnormal.
o it assumes now that URB_FUNCTION_BULK_OR_INTERRUPT_TRANSFER is in
  DISPATCH_LEVEL (non-sleepable) and as further work
  URB_FUNCTION_VENDOR_XXX and URB_FUNCTION_CLASS_XXX should be.

Reviewed by:	Hans Petter Selasky <hselasky_at_freebsd.org>
Tested by:	Paul B. Mahol <onemda_at_gmail.com>
2009-03-12 02:51:55 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
Sam Leffler
f11fe89814 Fix TXPMGT handling:
o correct dBm<->mW conversion logic
o set net80211 TXPMGT capability only if driver reports it is capable

PR:		kern/132342
Submitted by:	"Paul B. Mahol" <onemda@gmail.com>
2009-03-09 02:37:52 +00:00
Weongyo Jeong
6affafd098 o port NDIS USB support from USB1 to the new usb(USB2).
o implement URB_FUNCTION_ABORT_PIPE handling.
o remove unused code related with canceling the timer list for USB
  drivers.
o whitespace cleanup and style(9)

Obtained from:	hps's original patch
2009-03-07 07:26:22 +00:00
Andrew Thompson
3975e3a1ea Move usb to a graveyard location under sys/legacy/dev, it is intended that the
new USB2 stack will fully replace this for 8.0.

Remove kernel modules, a subsequent commit will update conf/files. Unhook
usbdevs from the build.
2009-02-23 18:16:17 +00:00
Andrew Thompson
1e736167a5 Provide a NDIS tx power level converstion to/from net80211, this uses a loookup
table to approximate mW<->dBM.

Submitted by:	Paul B. Mahol
2009-01-12 17:15:09 +00:00
Weongyo Jeong
c862b05ba7 fix a typo to set the 48Mbps data rate.
PR:		kern/130189
Submitted by:	Paul B. Mahol <onemda_at_gmail.com>
Reviewed by:	sam
MFC after:	3 weeks
2009-01-09 02:31:51 +00:00