Commit Graph

16 Commits

Author SHA1 Message Date
Bruce Evans
82d86d3750 Moved the SMP declarations of INTREN() and INTRDIS() to the correct header,
i.e., the same header as corresponding non-SMP #defines.
1998-01-01 08:47:17 +00:00
Steve Passe
87a6f31089 Last commit didn't take, operator error??? 1997-07-22 20:12:32 +00:00
Steve Passe
e94493547b Disabled 2 static inlines:
- INTRGET()
 - INTRSET()

These were only used in if_ze.c (already removed) and npx.c.  The code
in npx.c has also been cleaned of all APIC code.
1997-07-21 08:20:07 +00:00
Peter Wemm
ecf8148761 remove opt_smp.h from this well-included file, minor style police 1997-05-29 04:58:04 +00:00
Steve Passe
296bffc9c0 informal discussion between Bruce Evans <bde@zeta.org.au>,
Peter Wemm <peter@spinner.DIALix.COM>, Steve Passe <smp@csn.net>

removed all the IPI_INTS code.
made the XFAST_IPI32 code default, renaming Xfastipi32 to Xinvltlb.
cleanup of i386/isa/isa_device.h to eliminate SMP dependancies:
  made the id_irq member of struct isa_device an u_int.
  made the id_drq member of struct isa_device an int.
  removed all other '#ifdefs' concerning SMP & APIC_IO.
removed SMP/APIC_IO dependancies from if_ze.c.
1997-04-27 21:18:59 +00:00
Peter Wemm
477a642cee Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Satoshi Asami
c9da8434ea Yet another merge. Remove support.s by deleting memcopy. Remove
autoconf.c by merging icu.h.  Fix a couple of typos.

Submitted by:	The FreeBSD(98) Development Team.
1996-09-07 02:14:47 +00:00
David Greenman
22414e535a Laptop Advanced Power Management support by HOSOKAWA Tatsumi.
Submitted by:	HOSOKAWA Tatsumi
1994-10-01 02:56:21 +00:00
Bruce Evans
8ebeb948c5 The previous revision got the wrong log message (for clock.c). It should
have got the following:

Back out the changes in the previous revision.  Function-like macros
were replaced by compound statements that work in less contexts.

Unoformize idempotency #ifdef.
1994-09-18 23:18:32 +00:00
Bruce Evans
eb51e37703 Remove some unnecessary #includes.
Restore the simple leap year calculation as a macro and document it so
that it doesn't become complicated again.  The simple version works
for all leap years covered by 32-bit time_t's.  The complicated version
doesn't work for all leap years covered by 64-bit time_t's since among
other reasons, the solar system is not stable for long enough.

Fix declarations.

Nuke spinwait().
1994-09-18 23:08:56 +00:00
David Greenman
df9ab3049d Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
David Greenman
d230622648 New interrupt code from Bruce Evans. In additional to Bruce's attached
list of changes, I've made the following additional changes:

1) i386/include/ipl.h renamed to spl.h as the name conflicts with the
   file of the same name in i386/isa/ipl.h.
2) changed all use of *mask (i.e. netmask, biomask, ttymask, etc) to
   *_imask (net_imask, etc).
3) changed vestige of splnet use in if_is to splimp.
4) got rid of "impmask" completely (Bruce had gotten rid of netmask),
   and are now using net_imask instead.
5) dozens of minor cruft to glue in Bruce's changes.

   These require changes I made to config(8) as well, and thus it must
be rebuilt.

-DG

from Bruce Evans:

sio:
	o No diff is supplied.  Remove the define of setsofttty().  I hope
	  that is enough.

*.s:
	o i386/isa/debug.h no longer exists.  The event counters became too
	  much trouble to maintain.  All function call entry and exception
	  entry counters can be recovered by using profiling kernel (the new
	  profiling supports all entry points; however, it is too slow to
	  leave enabled all the time; it also).  Only BDBTRAP() from debug.h
	  is now used.  That is moved to exception.s.  It might be worth
	  preserving SHOW_BITS() and calling it from _mcount() (if enabled).
	o T_ASTFLT is now only set just before calling trap().
	o All exception handlers set SWI_AST_MASK in cpl as soon as possible
	  after entry and arrange for _doreti to restore it atomically with
	  exiting.  It is not possible to set it atomically with entering
	  the kernel, so it must be checked against the user mode bits in
	  the trap frame before committing to using it.  There is no place
	  to store the old value of cpl for syscalls or traps, so there are
	  some complications restoring it.

Profiling stuff (mostly in *.s):
	o Changes to kern/subr_mcount.c, gcc and gprof are not supplied yet.
	o All interesting labels `foo' are renamed `_foo' and all
	  uninteresting labels `_bar' are renamed `bar'.  A small change
	  to gprof allows ignoring labels not starting with underscores.
	o MCOUNT_LABEL() is to provide names for counters for times spent
	  in exception handlers.
	o FAKE_MCOUNT() is a version of MCOUNT() suitable for exception
	  handlers.  Its arg is the pc where the exception occurred.  The
	  new mcount() pretends that this was a call from that pc to a
	  suitable MCOUNT_LABEL().
	o MEXITCOUNT is to turn off any timer started by MCOUNT().

/usr/src/sys/i386/i386/exception.s:
	o The non-BDB BPTTRAP() macros were doing a sti even when interrupts
	  were disabled when the trap occurred.  The sti (fixed) sti is
	  actually a no-op unless you have my changes to machdep.c that make
	  the debugger trap gates interrupt gates, but fixing that would
	  make the ifdefs messier.  ddb seems to be unharmed by both
	  interrupts always disabled and always enabled (I had the branch in
	  the fix back to front for some time :-().
	o There is no known pushal bug.
	o tf_err can be left as garbage for syscalls.

/usr/src/sys/i386/i386/locore.s:
	o Fix and update BDE_DEBUGGER support.
	o ENTRY(btext) before initialization was dangerous.
	o Warm boot shot was longer than intended.

/usr/src/sys/i386/i386/machdep.c:
	o DON'T APPLY ALL OF THIS DIFF.  It's what I'm using, but may require
	  other changes.
	  Use the following:
		o Remove aston() and setsoftclock().
	  Maybe use the following:
		o No netisr.h.
		o Spelling fix.
		o Delay to read the Rebooting message.
		o Fix for vm system unmapping a reduced area of memory
		  after bounds_check_with_label() reduces the size of
		  a physical i/o for a partition boundary.  A similar
		  fix is required in kern_physio.c.
		o Correct use of __CONCAT.  It never worked here for non-
		  ANSI cpp's.  Is it time to drop support for non-ANSI?
		o gdt_segs init.  0xffffffffUL is bogus because ssd_limit
		  is not 32 bits.  The replacement may have the same
		  value :-), but is more natural.
		o physmem was one page too low.  Confusing variable names.
	  Don't use the following:
		o Better numbers of buffers.  Each 8K page requires up to
		  16 buffer headers.  On my system, this results in 5576
		  buffers containing [up to] 2854912 bytes of memory.
		  The usual allocation of about 384 buffers only holds
		  192K of disk if you use it on an fs with a block size
		  of 512.
		o gdt changes for bdb.
		o *TGT -> *IDT changes for bdb.
		o #ifdefed changes for bdb.

/usr/src/sys/i386/i386/microtime.s:
	o Use the correct asm macros.  I think asm.h was copied from Mach
	  just for microtime and isn't used now.  It certainly doesn't
	  belong in <sys>.  Various macros are also duplicated in
	  sys/i386/boot.h and libc/i386/*.h.
	o Don't switch to and from the IRR; it is guaranteed to be selected
	  (default after ICU init and explicitly selected in isa.c too, and
	  never changed until the old microtime clobbered it).

/usr/src/sys/i386/i386/support.s:
	o Non-essential changes (none related to spls or profiling).
	o Removed slow loads of %gs again.  The LDT support may require
	  not relying on %gs, but loading it is not the way to fix it!
	  Some places (copyin ...) forgot to load it.  Loading it clobbers
	  the user %gs.  trap() still loads it after certain types of
	  faults so that fuword() etc can rely on it without loading it
	  explicitly.  Exception handlers don't restore it.  If we want
	  to preserve the user %gs, then the fastest method is to not
	  touch it except for context switches.  Comparing with
	  VM_MAXUSER_ADDRESS and branching takes only 2 or 4 cycles on
	  a 486, while loading %gs takes 9 cycles and using it takes
	  another.
	o Fixed a signed branch to unsigned.

/usr/src/sys/i386/i386/swtch.s:
	o Move spl0() outside of idle loop.
	o Remove cli/sti from idle loop.  sw1 does a cli, and in the
	  unlikely event of an interrupt occurring and whichqs becoming
	  zero, sw1 will just jump back to _idle.
	o There's no spl0() function in asm any more, so use splz().
	o swtch() doesn't need to be superaligned, at least with the
	  new mcounting.
	o Fixed a signed branch to unsigned.
	o Removed astoff().

/usr/src/sys/i386/i386/trap.c:
	o The decentralized extern decls were inconsistent, of course.
	o Fixed typo MATH_EMULTATE in comments. */
	o Removed unused variables.
	o Old netmask is now impmask; print it instead.  Perhaps we
	  should print some of the new masks.
	o BTW, trap() should not print anything for normal debugger
	  traps.

/usr/src/sys/i386/include/asmacros.h:
	o DON'T APPLY ALL OF THIS DIFF.  Just use some of the null macros
	  as necessary.

/usr/src/sys/i386/include/cpu.h:
	o CLKF_BASEPRI() changes since cpl == SWI_AST_MASK is now normal
	  while the kernel is running.
	o Don't use var++ to set boolean variables.  It fails after a mere
	  4G times :-) and is slower than storing a constant on [3-4]86s.

/usr/src/sys/i386/include/cpufunc.h:
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the include of
	  <machine/ipl.h>.  Unfortunately, <machine/ipl.h> is needed by
	  almost everything for the inlines.

/usr/src/sys/i386/include/ipl.h:
	o New file.  Defines spl inlines and SWI macros and declares most
	  variables related to hard and soft interrupt masks.

/usr/src/sys/i386/isa/icu.h:
	o Moved definitions to <machine/ipl.h>

/usr/src/sys/i386/isa/icu.s:
	o Software interrupts (SWIs) and delayed hardware interrupts (HWIs)
	  are now handled uniformally, and dispatching them from splx() is
	  more like dispatching them from _doreti.  The dispatcher is
	  essentially *(handler[ffs(ipending & ~cpl)]().
	o More care (not quite enough) is taken to avoid unbounded nesting
	  of interrupts.
	o The interface to softclock() is changed so that a trap frame is
	  not required.
	o Fast interrupt handlers are now handled more uniformally.
	  Configuration is still too early (new handlers would require
	  bits in <machine/ipl.h> and functions to vector.s).
	o splnnn() and splx() are no longer here; they are inline functions
	  (could be macros for other compilers).  splz() is the nontrivial
	  part of the old splx().

/usr/src/sys/i386/isa/ipl.h
	o New file.  Supposed to have only bus-dependent stuff.  Perhaps
	  the h/w masks should be declared here.

/usr/src/sys/i386/isa/isa.c:
	o DON'T APPLY ALL OF THIS DIFF.  You need only things involving
	  *mask and *MASK and comments about them.  netmask is now a pure
	  software mask.  It works like the softclock mask.

/usr/src/sys/i386/isa/vector.s:
	o Reorganize AUTO_EOI* macros.
	o Option FAST_INTR_HANDLER_USERS_ES for people who don't trust
	  fastintr handlers.
	o fastintr handlers need to metamorphose into ordinary interrupt
	  handlers if their SWI bit has become set.  Previously, sio had
	  unintended latency for handling output completions and input
	  of SLIP framing characters because this was not done.

/usr/src/sys/net/netisr.h:
	o The machine-dependent stuff is now imported from <machine/ipl.h>.

/usr/src/sys/sys/systm.h
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the different
	  splx() prototype.  The spl*() prototypes are duplicated as
	  inlines in <machine/ipl.h> but they need to be duplicated here
	  in case there are no inlines.  I sent systm.h and cpufunc.h
	  to Garrett.  We agree that spl0 should be replaced by splnone
	  and not the other way around like I've done.

/usr/src/sys/kern/kern_clock.c
	o splsoftclock() now lowers cpl so the direct call to softclock()
	  works as intended.
	o softclock() interface changed to avoid passing the whole frame
	  (some machines may need another change for profile_tick()).
	o profiling renamed _profiling to avoid ANSI namespace pollution.
	  (I had to improve the mcount() interface and may as well fix it.)
	  The GUPROF variant doesn't actually reference profiling here,
	  but the 'U' in GUPROF should mean to select the microtimer
	  mcount() and not change the interface.
1994-04-02 07:00:53 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00