Commit Graph

181 Commits

Author SHA1 Message Date
Xin LI
506b3c39b8 Add PCI ID for MCS9901.
Submitted by:	gcooper
PR:		kern/144397
MFC after:	1 month
2010-03-01 20:41:27 +00:00
Marius Strobl
48533564ca Recognize the NS16552 found in PCIe-based sun4u machines. 2009-12-23 22:31:43 +00:00
Gavin Atkinson
eb8e36c9f6 Support the tablet in (at least) the Toshiba Portege M200 Tablet PC.
This device only appears on the ACPI bus, so isn't caught by the current
entry for it in the uart(4) ISA attachment.

PR:		kern/140172
Reviewed by:	jhb, marcel
Approved by:	ed (mentor)
MFC after:	2 weeks
2009-12-21 22:57:40 +00:00
Alexander Motin
7b4386c655 Add ID for NetMos NM9820 Serial Port chip, found on CardBus serial adapter. 2009-12-08 14:55:07 +00:00
Marcel Moolenaar
1d864e0d2d Add support for the NetMos NM9865 family of Serial/Parallel ports.
Obtained from:	NetMos MCS9865 v1.0.0.1 driver
MFC after:	3 days
2009-12-07 20:05:02 +00:00
Ed Schouten
f02d50a3c8 Remove unneeded includes of <sys/termios.h>. 2009-11-28 11:13:50 +00:00
Marcel Moolenaar
0acb3c4aac Fix RTS/CTS flow control, broken by the TTY overhaul. The new TTY
interface is fairly simple WRT dealing with flow control, but
needed 2 new RX buffer functions with "get-char-from-buf" separated
from "advance-buf-pointer" so that the pointer could be advanced
only when ttydisc_rint() succeeded.

MFC after:	1 week
2009-10-02 22:30:44 +00:00
Nathan Whitehorn
ccf6415e82 Fix serial console on Apple Xserve G5 by falling back to input-device-1
if input-device is unavailable. The Xserve G5 defaults to using
screen/keyboard for output-device/input-device even if these are not
installed, and then falls back to serial ports at boot time.

Reviewed by:	marcel
Hardware from:	grehan
Approved by:	re (kib)
2009-07-23 12:51:27 +00:00
Marcel Moolenaar
85fc5c3b93 Move the memory layout definitions and logic from mvreg.h to mvwin.h
so that it isn't exposured unless needed. In particular this means
that it's easier to tune the memory layout based on board details.
While here, remove inclusion of <machine/intr.h> from mvreg.h. This
also contains exposure to SoC specifics in MI drivers, because NIRQ
depends on the SoC.
2009-06-12 20:00:38 +00:00
Ed Schouten
c5e30cc02b Last minute TTY API change: remove mutex argument from tty_alloc().
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.

The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
Marcel Moolenaar
39bc3bff94 Don't use pmap_kextact() when comparing bus handles for Book-E.
We typically wire translation to devices with TLB1 entries and
pmap_kextract() does not know about those and returns 0.  This
causes false positives (read: all serial ports suddenly become
the console).
2009-04-08 22:19:39 +00:00
Marcel Moolenaar
d7ae5af5c4 Fix hangs caused by hardware that signals receive errors
(framing, parity, etc), but does not indicate characters
being received. Since no chracters have been received,
ignore the line errors.

PR:		131006
MFC after:	3 days
2009-04-08 00:14:06 +00:00
Nathan Whitehorn
1c96bdd146 Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode
provided, for example, on the PowerPC 970 (G5), as well as on related CPUs
like the POWER3 and POWER4.

This also adds support for various built-in hardware found on Apple G5
hardware (e.g. the IBM CPC925 northbridge).

Reviewed by:    grehan
2009-04-04 00:22:44 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
John Baldwin
843994aee1 Add support for the single-port NetMos NM9835 serial adapter. The puc(4)
entry is a specific entry to override the generic NetMos entry so that
puc(4) will leave this device alone and let uart(4) claim it.

Submitted by:	Navdeep Parhar  nparhar @ gmail
Reviewed by:	marcel
MFC after:	1 week
2009-03-05 16:43:33 +00:00
Kai Wang
64fc5491db Added entries for Lava SP-PCI (1 serial + 1 parallel) PCI card. The
card is a multifunction PCI and report itself as two logical devices.
2009-02-11 00:08:03 +00:00
Rafal Jaworowski
d0bc717a43 De-hard code UART speed setting for Marvell SOCs when hw.uart.console is not
specified. Instead, let uart(4) fall back to whatever speed firmware has set.
2009-01-08 13:24:25 +00:00
Alexander Kabaev
7d376cbce3 Minor style(9) compliance change. 2008-12-27 16:03:34 +00:00
Marcel Moolenaar
437f63ab5f Cast to uintptr_t before casting to void*. This allows the
QUICC backend to be built on LP64 platforms. This makes it
possible to include the QUICC backend in the kernel module.

PR:		127120
2008-11-22 21:22:53 +00:00
Ed Schouten
9b866e4e8b Fix detaching of uart(4) devices.
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.

This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.

Reported by:	rnoland
2008-10-23 19:11:44 +00:00
Rafal Jaworowski
373bbe25ff Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00
Yoshihiro Takahashi
3726c6bbc1 Use bus_space_compare() rather than i386_memio_compare() directly. 2008-09-07 04:47:39 +00:00
Yoshihiro Takahashi
81df65c311 Add the 2nd CCU and PnP devices support on pc98.
Reviewed by:	imp
Obtained from:	//depot/projects/uart with some fixes
2008-08-25 14:45:24 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
Benno Rice
0aefb0a63c The XScale PXA255 has three generally ns16x50 compatible UARTs. One of the
variations from normal 16x50 behaviour however is the the use of a normally
unused bit of IER to control RX timeout interrupts independently of the
generally used RXRDY bit.  If this bit is not enabled, we only ever get
interrupts when the FIFO is full, never before.  This is not very useful when
the UART is being used as a console.

In order to support this without causing potential problems on more "normal"
16x50 variants, this change introduces two hints for the uart device, ier_mask
and ier_rxbits.  These can be used to override which bits get set and cleared
when we're enabling and disabling RX interrupts.

Reviewed by:	marcel
2008-05-30 01:57:13 +00:00
Peter Wemm
43d7128c14 Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00
Sam Leffler
823c77d78b add device hints to control the rx FIFO interrupt level on 16550A parts
PR:		kern/121421
Submitted by:	UEMURA Tetsuya
Reviewed by:	marcel
MFC after:	2 weeks
2008-03-12 19:09:20 +00:00
Rafal Jaworowski
e1ef781113 Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel resources, which are in
turn muxed/demuxed by the Serial Communications Controller (SCC).

Along with core QUICC/SCC functionality a uart(4)-compliant device driver is
provided which allows for serial ports over QUICC/SCC.

Approved by:	cognet (mentor)
Obtained from:	Juniper
MFp4:		e500
2008-03-03 18:20:17 +00:00
Rafal Jaworowski
6b7ba54456 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00
Robert Watson
3de213cc00 Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00
Marcel Moolenaar
de2fa7b8af Redefine bus_space_tag_t on PowerPC from a 32-bit integral to
a pointer to struct bus_space. The structure contains function
pointers that do the actual bus space access.

The reason for this change is that previously all bus space
accesses were little endian (i.e. had an explicit byte-swap
for multi-byte accesses), because all busses on Macs are little
endian.
The upcoming support for Book E, and in particular the E500
core, requires support for big-endian busses because all
embedded peripherals are in the native byte-order.

With this change, there's no distinction between I/O port
space and memory mapped I/O. PowerPC doesn't have I/O port
space. Busses assign tags based on the byte-order only.
For that purpose, two global structures exist (bs_be_tag and
bs_le_tag), of which the address can be taken to get a valid
tag.

Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
Marcel Moolenaar
7db977fb07 The HP Diva RMP3 uses BAR 0x14. 2007-05-17 04:07:19 +00:00
Marius Strobl
5ffa507dce Fix bugs in the Sun -> AT keycode translation table which caused the
Props key to act as Again and the Paste and Copy keys to be inverted.
2007-05-01 14:14:52 +00:00
Marcel Moolenaar
9760f68ca0 Add PCI IDs for the HP RMP3 serial port. This is often used as
the serial console.

MFC after: 1 week
2007-04-05 19:15:46 +00:00
Marcel Moolenaar
35777a2a79 Don't use a time-limiting loop that's defined in terms of the baudrate
in the putc() method.  Likewise, in the getc() method, don't check for
received characters with an interval defined in terms of the baudrate.
In both cases it works equally well to implement a fixed delay.  More
importantly, it avoids calculating a delay that's roughly 1/10th the
time it takes to send/receive a character. The calculation is costly
and happens for every character sent or received, affecting low-level
console or debug port performance significantly. Secondly, when the
RCLK is not available or unreliable, the delays could disrupt normal
operation.

The fixed delay is 1/10th the time it takes to send a character at
230400 bps.
2007-04-03 01:21:10 +00:00
Marcel Moolenaar
f8100ce2a7 Don't expose the uart_ops structure directly, but instead have
it obtained through the uart_class structure. This allows us
to declare the uart_class structure as weak and as such allows
us to reference it even when it's not compiled-in.
It also allows is to get the uart_ops structure by name, which
makes it possible to implement the dt tag handling in uart_getenv().
The side-effect of all this is that we're using the uart_class
structure more consistently which means that we now also have
access to the size of the bus space block needed by the hardware
when we map the bus space, eliminating any hardcoding.
2007-04-02 22:00:22 +00:00
Marcel Moolenaar
ebecffe930 For embedded UARTs compatible with the ns8250 family it is possible
that the driver clock is identical to the processor or bus clock.
This is the case for the PowerQUICC processor. When the clock is
high enough, overflows happen in the calculation of the time it
takes to send 1/10 of a character, used in delay loops. Fix the
overflows so as to fix bugs in the delay loops that can cause either
insufficient delays or excessive delays.
2007-03-28 18:34:59 +00:00
Marcel Moolenaar
1c5e367bcc When we match UARTs found during bus-enumeration with UARTs used for
system devices (i.e. console, debug port or keyboard), don't stop
after the first match. Find them all and keep track of the last.
The reason for this change is that the low-level console is always
added to the list of system devices first, with other devices added
later. Since new devices are added to the list at the head, we have
the console always at the end. When a debug port is using the same
UART as the console, we would previously mark the "newbus" UART as
a debug port instead of as a console. This would later result in a
panic because no "newbus" device was associated with the console.
By matching all possible system devices we would mark the "newbus"
UART as a console and not as a debug port.
While it is arguably better to be able to mark a "newbus" UART as
both console and debug port, this fix is lightweight and allows
a single UART to be used as the console as well as a debug port
with only the aesthetic bug of not telling the user about it also
being a debug port.

Now that we match all possible system devices, update the rclk of
the system devices with the rclk that was obtained through the
bus attachment. It is generally true that clock information is
more reliable when obtained from the parent bus than by means of
some hardcoded or assumed value used early in the boot. This by
virtue of having more context information.

MFC after: 1 month
2007-03-28 18:26:12 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
97202af2dc - Add a uart_rxready() and corresponding device-specific implementations
that can be used to check whether receive data is ready, i.e. whether
  the subsequent call of uart_poll() should return a char, and unlike
  uart_poll() doesn't actually receive data.
- Remove the device-specific implementations of uart_poll() and implement
  uart_poll() in terms of uart_getc() and the newly added uart_rxready()
  in order to minimize code duplication.
- In sunkbd(4) take advantage of uart_rxready() and use it to implement
  the polled mode part of sunkbd_check() so we don't need to buffer a
  potentially read char in the softc.
- Fix some mis-indentation in sunkbd_read_char().

Discussed with:	marcel
2007-01-18 22:01:19 +00:00
Marius Strobl
65deb9d947 - In sunkbd_probe_keyboard() don't bother to determine the keyboard layout
as we have no use for that info. Instead let this function return the
  keyboard ID and verify at its invocation in sunkbd_configure() that we're
  talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
  driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
  code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
  emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
  kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
  triggers the use of AT keyboard maps and thus allows to use the map files
  in share/syscons/keymaps with this driver at the cost of an additional
  translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
  of the other keyboard drivers allows to specify the default in-kernel
  keyboard map. For obvious reasons this made to only work when also using
  SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
  which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
  case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
  having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
  keyboard LEDs as this consequently requires a hardware FIFO that is at
  least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
  have. Thus use an inlined version of uart_putc() to consecutively write
  the command bytes (a cleaner approach would be to do this via the soft
  interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.

PR:		90316 [1]
Reviewed by:	marcel [1]
2006-11-02 00:01:15 +00:00
Ruslan Ermilov
9fddcc6661 Fix our ioctl(2) implementation when the argument is "int". New
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.

Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.

Reviewed by:	bde (with contributions)
Tested by:	emax, marius
MFC after:	1 week
2006-09-27 19:57:02 +00:00
Maksim Yevmenkin
8c3c9a505f Do not try to call keyboard callback unless keyboard is active and busy.
This should fix 'kbdcontrol -K < /dev/console' panic on sparc64 with sunkbd(4).

PR:		sparc64/96798
MFC after:	1 week
2006-09-18 22:56:59 +00:00
Marcel Moolenaar
dd5b096f42 Properly propagate overrun conditions to the TTY layer.
MFC after: 3 days
2006-07-27 00:07:10 +00:00
Marcel Moolenaar
54cfafcf98 On PowerPC the clock for the BRG comes from RTxC, not PCLK. Add a
quick hack to deal with this. We may need to formalize this better
and have this information come from the bus attachments.
2006-07-26 17:29:37 +00:00
Marcel Moolenaar
afd396ac93 Implement UART_IOCTL_BAUD for the Z8530. This allows a serial console
on PowerPC use the current setting of the hardware and not second
guess what the OFW does on various machines.
2006-07-26 17:21:59 +00:00
Marcel Moolenaar
e997db5d3a Implement uart_cpu_eqres() and uart_cpu_getdev(). This allows
FreeBSD to use a serial console, as per the OFW settings.
2006-07-26 17:17:23 +00:00
Poul-Henning Kamp
7672c95932 Convert to new console api 2006-05-26 13:54:27 +00:00
Poul-Henning Kamp
9b188af13c Eliminate gdb_checkc member from GDB_DBGPORT(), it is never used.
Use polling behaviour for gdb_getc() where convenient, this edges us
closer to the console code.
2006-05-26 11:54:32 +00:00
Marcel Moolenaar
eb2198ec84 Remove definitions of uart_[gs]etdreg. They are not used anymore and
were in fact wrong.
2006-05-23 22:33:44 +00:00