- The "Osd*" stuff went away from acpi driver code, use the bus_space
functions directly instead.
- Fix minor english bugs.
acpi_registers_input -> acpi_register_input
acpi_registers_output -> acpi_register_output
- Remove all magic numbers for the sleeping states. We now have
#defines for these.
- NULL is treated the same as the return from aml_get_rootname in
aml_find_from_namespace().
Suggested by: msmith
Thanks mike!
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
statistics as a side effect.
Submitted by: Marcin Cieslak <saper@system.pl>
with some tweaks to RAD_ACCT_SESSION_ID and
RAD_ACCT_MULTI_SESSION_ID generation by me.
that is not true. Instead of looping NGROUPS times, get the return value
from getgroups() and loop over the return that many times.
Noticed by: David A. Holland <dholland@eecs.harvard.edu>
for crypt(3) by now. In any case:
Add crypt_set_format(3) + documentation to -lcrypt.
Add login_setcryptfmt(3) + documentation to -lutil.
Support for switching crypt formats in passwd(8).
Support for switching crypt formats in pw(8).
The simple synopsis is:
edit login.conf; add a passwd_format field set to "des" or "md5"; go nuts :)
Reviewed by: peter
isn't open and the links MRU >= our MRRU, send outbound traffic as
PROTO_IP rather than PROTO_MP. This shaves some bytes off the front
of each packet 'till the second link is brought up.
Idea obtained from: Cisco
of the two when calculating the MP throughput average for the ``set
autoload'' implementation.
This makes more sense as all links I know of are full-duplex. This
also means that people may need to adjust their autoload settings
as 100% bandwidth is now the theoretical maximum rather than 200%
(but of course, halfing the current settings is probably not the
correct answer either!).
This involves a ppp version bump as we need to pass an extra
throughput array through the MP local domain socket.
- use getopt(3) to parse command line arguments instead of home-made incomplete
parser;
- be more verbose when error in command line encountered (i.e. incorrect
playing/recording device, incorrect recsrc syntax).
cumulative total of all active links rather than basing it on the
total of PROTO_MP traffic.
This fixes a problem whereby Cisco routers send PROTO_IP packets only
when there's only one link (hmm, what a good idea!).
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
page.
Add ability to run "inetd -R 0" to disable the default connection
per minute limit of 256 connections. Document this in man page.
Don't use maxchild as a boolean - instead check if it is greater
than zero.
Reviewed by: sheldonh
Based on a patch by: Alexander Langer <alex@big.endian.de>
Remove extra parens from my host selection commit.
Add white space after if, while, for and switch.
Get rid of braces around a single statement if.
There should be no functional changes in this commit.
Reviewed by: sheldonh
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
The regulations has been changed to adopt 802.11b since Oct. 99.
For 11Mbps NICs sold in Japan, all DS channels (1..14) are available.
Thank you, itojun.
Obtained from: NetBSD:basesrc/usr.sbin/wiconfig/wiconfig.8 Rev.1.5 ->1.6
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
directories to not be printed. This is from OpenBSD (and I think
NetBSD also) and makes our mtree more compatible with other BSDs.
This makes cross compilation easier than it was before. Other changes
will be needed to allow NetBSD or OpenBSD to cross build on FreeBSD,
but this is a start.
Reviewed by: andrey
Obtained from: OpenBSD
Concentric Red Circles by: My own stupidity
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
a similar way to the way it can select messages from a given program.
Lines beginning with "+hostname" or "#+hostname" select messaes
from that hostname and lines beginning with "-hostname" or "#-hostname"
match messages not from that hostname.
There are some significant style issues left in the original program
selection code and the man page. This should be cleared up in some
later commits.
Reviewed by: sheldonh
Based on an original patch by: Bernd Walter <ticso@cicely8.cicely.de>
Man page stylist: sheldonh
This should cause -w's argument not to be ignored in the usermod case,
so it will affect modification of the user's password instead of using
the pw.conf (or internal default=no '*') password method.
PR: bin/11168
* Re-order the list of options in teh DESCRIPTION as per
the SYNOPSIS.
* Move the description of exit conditions from the
DESCRIPTION section to a new DIAGNOSTICS section.
* Typo fix: "effect" -> "affect" when used as a verb.
* Clear the Nm macro as appropriate.
* Typo fix: "consider" -> "considers" for a singular subject.
* Use Nx instead of NetBSD.
strlen.
This one only occurs if there is exactly one element on the line without any
whitespace. This is however never a valid line, so not a big chance that
this would ever cause any problems.
compatible with other *BSD camp. Add -L option to follow symlinks, so remove
-P option which is now default. The next step will be to add -L to building
process.
Asked-by: bde
log insert/remove events using the logstr, if specified for that card,
or the manufacturer + version strings from the cis if not. This
eliminates the need to have logger in the pccard.conf file which makes
it easier to move pcardd to /sbin later if we need to. This also
reduces the pccard.conf file size from 53k to 28k, which will help the
install disk a little.
Also, minor cleanup of free usage (if (x != NULL) free(x); is
identical to free(x); for all versions of C that we care about).
Reviewed by: iwasaki (who proposed the logstr keyword).
Documentation and fixes to pccard.conf to follow.
IPv6 configuration is only done by rtsol. Does someone really
need manual configuration? :-)
You can specify IPv6 DNS server as well.
We have only one server ftp7.jp.freebsd.org that speaks IPv6
in this time. ftp7.jp speaks IPv4 as well and also listed as
Japan #7.
Approved by: jkh
original \0 on the terminating string, however I changed my mind to
make it more obvious that the termination was being taken care of and
explicitly added the nul terminator. I forgot to reset the bcopy length.
was being made one byte too short, and the string assembled in it was not
null terminated. The string was passed to regcomp() so it never matched
anything in /etc/usbd.conf. This is the cause of usbd not working for the
last few days.. The new malloc.conf default of AJ triggered this.
saving is boot0. If it is, use its version number so that we can grab
all of boot0 (1024 bytes with version 1.1 for example) when we save it
to a file via the 'f' option. Otherwise, we just save the first sector.
- Cleanup this code a bit by splitting some functionality out into separate
functions.
Suggested by: Patrick Bihan-Faou <patrick@mindstep.com> (1)
one packet. Also check that the whole request has been recieved
before processing it.
The patch isn't the exact one from the PR, but a slight varient
suggested by Brian.
PR: 16086
Submitted by: Hajimu UMEMOTO <ume@mahoroba.org>
Reviewed by: green
- Allow for boot0 to be more than one sector long. However, ensure that it
its length is a multiple of the sector length.
- Change the signatures used to determine a valid boot0 as some of the
signature code changed.
- Use the old signature to detect version 1.0 of boot0, otherwise read the
version number from boot0 itself.
argument via optarg. This corrects a segfault when initattr is invoked
with either of these two arguments. Not sure how this got broken given
that in the original patches it was fine -- presumably a merging
mistake.
Obtained from: TrustedBSD Project
effect the idle timer in different ways.
Submitted by: Stefan Esser <se@freebsd.org>
With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.
I made the style more consistent in ip.c - this should really have
been done as a separate commit.
o If the new ``filter-decapsulation'' is enabled, delve into UDP packets
that contain 0xff 0x03 as the first two bytes, and if we recognise it
as PROTO_IP, decapsulate it for the purpose of filter checking.
If we recognise it as PROTO_<anything else> mention this for logging
purposes only.
This change is aimed at people running PPPoUDP where the UDP traffic is
being sent over another PPP link. It's desireable to have the top level
link connected all the time, but to have the bottom level link capable
of decapsulating the traffic and comparing the payload against the filters,
thus allowing ``set filter dial ...'' to work in tunnelled environments.
The caveat here is that the top ppp cannot employ any compression layers
without making the data unreadable for the bottom ppp. ``disable deflate
pred1 vj'' and ``deny deflate pred1 vj'' is suggested.
functionality when nothing had actually changed; -d changes would
not set the 'something had changed flag'. Actually test for a
change in homedir.
PR: bin/19649
abusing sendmail by any other way via MAILTO tag (since sendmail is running
from daemon). Now run sendmail from user, as any other cron user command.
Obtained from: Inspired by OpenBSD, but implementation is different
The only change in the default functionality should be that
the output reports are slightly more verbose WRT files deleted.
Not objected to by: freebsd-arch
a full reindex in this case to remove the old record. #ifdef -u capability
since this is available on FreeBSD only.
PR: bin/16418
Problem pointed out by: Masachika ISHIZUKA <ishizuka@ish.org>
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
config(8). This commit allows control of the creation of the
#include "foo.h" files. We now only create them explicitly when needed.
BTW; these are mostly bad because they usually imply static limits on
numbers of units for devices. eg: struct mysoftc sc[NFOO];
These static limits have Got To Go.
