Recent changes in the pseudo header accessor prototypes start to
use common code RxQ handle on datapath. The handle was located
at the end of the structure with members not used on datapath.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9359
TxQ is destroyed on stop and last used tag should be reset to default 0
on the next start.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9358
The sysctl controls the period per interface.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9153
The period should be taken into account by the function which
refreshes driver stats.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9130
Firmware version which takes PERIOD_MS parameter into account is
required.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9129
Unnecessary prefetch just loads HW prefetcher and displaces other
cache entries (which could be really useful).
If we parse mbuf for TSO early and use firmware-assisted TSO, we do not
expect mbuf data access when we compose firmware-assisted TSO (v1 or v2)
option descriptors. If packet header needs to be linearized or finally
FATSO cannot be used because of, for example, too big header, we do not
care about a bit more performance degradation because of prefetch
absence (it is better to optimize more common case).
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9120
Siena has limitation on maximum byte count and 4k boundary crosssing
(which is stricter than maximum byte count).
EF10 has limitation on maximum byte count only.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9061
It is safer to consider EFX_LINK_UNKNOWN as link down.
link_mode is set to EFX_LINK_UNKNOWN on port stop and fini.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9060
This allows the common code to use the correct type for the lock state
local variable passed to EFSYS_LOCK() and EFSYS_UNLOCK().
On Windows, this allows warning supression pragmas to be removed.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Wake-on-lan is not supported in production on any of our adapters, as
they don't have the required AUX power connector. (It's possible that
AUX power is supplied to some of our ALOM or mezz adapters, but if so
then we've never implemented or tested WoL support.)
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8972
The previous API had various problems, including the length of the
caller provided buffer not being specified, no means being available
to discover how big the buffer needs to be, and a lack of clarity of
what the resulting list contains.
To fix it:
- add the buffer length as a parameter
- if the provided buffer is too short, fail with ENOSPC and return the
required length
- ensure that the list contents are valid and add comments
describing it
It is safe to change this API as, unsuprisingly, it has no users.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8971
Manftest needs to know exactly what went wrong with the verified update
so that failing boards can be correctly diagnosed.
Submitted by: Tom Millington <tmillington at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8969
In newer firmware that supports multithreaded MCDI processing,
longer running commands may be run ina background thread. Add
support for drivers to query the appropriate timeout for each
MCDI request.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8968
Poll-mode driver does not use interrupts and number of used event queues
should not be limitted by the number of interrupts allocated for the
NIC.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8967
ICC complains that enumerated type mixed with another type.
Found by DPDK upstream build sanity check.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8954
It is not 100% correct to assign non-enum values to enum type
variables.
Found by ICC build (DPDK PMD upstreaming).
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8953
It is not safe to push TSO option descriptors if pacer bypass is
enabled, so to make sure that doesn't happen never push TSO option
descriptors.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8952
The flag EFX_FILTER_MATCH_LOC_MAC_IG to represent filtering on the
individual/group bit of the MAC address (with the two cases being
distingusished by the MAC address in the filter specification) was
introduced to mirror the Linux driver filtering code, but the
implementations are different enough anyway that it isn't of much value.
Having separate flags for unknown unicast and multicast simplifies
the code and allows the set of flags to match those used by MCDI.
It will also makes it easier to report whether these filters are
supported.
In the MCDI definitions, the unknown multicast and unicast flags have
the values 0x40000000 and 0x80000000 respectively, and so using the
same values for simplicity requires 32 bits in the filter specification
to store the flags. This means the structure is now a little bigger
than 64 bytes, but filters are not often used on critical paths so this
shouldn't have much impact - on Linux they are also bigger than they
used to be.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8951
It is required to minimize RxQ context in the driver or avoid chaising
for the NIC handle in adapter (global per-interface) structure.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8950
The semantics of the MCDI interfacve require reading the first
dword of the header before any other data in the buffer. Add
a barrier to the common code MCDI handler to enforce this.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8949
The port mask used for per-port sensors in mcdi_sensor_map
assumes zero-based port numbering. The port mask used in
the code is based on the one-based MCDI port number.
Fix this to lookup the correct per-port sensors, and to
allow reporting of sensor events from higher port numbers.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8947
Both Siena and EF10 use the siena_ev_qpoll() implementation, but this
function is not defined in builds without EFSYS_OPT_SIENA.
Remove siena_ev_qpoll and inline it into efx_ev_qpoll to allow it
to be used in non-Siena builds.
Also remove outdated FIXME comment, as EF10 event batching/merging has
been implemented long ago without needing to modify this code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8939
The function flags were changed to mirror the privileges, but
the privileges are preferred.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8936
Submitted by: Andrew Lee <alee at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8934
On Medford, using MC_CMD_GET_RXDP_CONFIG to query the RX end
padding setting is in the ADMIN group, and so fails for
unprivileged functions. In that case, assume the largest size
supported by Medford hardware (256bytes) to prevent overrun.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8933
For Siena and Huntington, the per-port bootcfg (aka expcfg) is
stored in a dedicated 4Kbyte partition for each port.
For Medford, the per-PF bootcfg is stored in a 2Kbyte sector
within a single shared partition. Update the common code to support
the new bootcfg layout.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8932
