Commit Graph

52 Commits

Author SHA1 Message Date
Pedro F. Giffuni
8a16b7a18f General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00
Brian Somers
ec91ed9155 Use the standard BSD copyright as per OpenBSD and /sys/net/slcompress* 2005-01-10 11:47:17 +00:00
Brian Somers
057f1760a8 Make ppp WARNS=5 clean 2004-09-05 01:46:52 +00:00
Brian Somers
6eafd35305 Include the correct file (stdarg.h) and use va_list rather than _BSD_VA_LIST_
Suggested by: mike
2002-08-27 20:11:58 +00:00
Philippe Charnier
f0067240a1 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:30:43 +00:00
Brian Somers
10be78d3ae Remove whitespace at the end of lines. 2002-06-15 08:03:30 +00:00
Brian Somers
de59e178aa o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

  When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
  to the SESSIONID from the environment in direct mode or the
  NGM_PPPOE_SESSIONID message in other modes.  If no SESSIONID is found,
  default to the interface index in client mode or zero in server mode.

  When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
  of the physical device (ie, the N in /dev/i4brbchN).

  This makes it easier for the RADIUS server to identify the client
  WRT accounting data etc.

Prompted by:	lsz8425 <lsz8425@mail.cd.hn.cn>
2002-05-14 12:55:39 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
209dc10239 Fix some printf-style argument bugs 2000-03-14 01:47:19 +00:00
Brian Somers
26af0ae966 Cosmetic: Make struct mbuf more like kernel mbufs. 1999-12-20 20:29:47 +00:00
Brian Somers
71981dcfc1 When uncompressing VJ-compressed frames, fix the ip_sum directly
in struct cstate rather than copying the stored header slot into a
potentially mis-aligned buffer then trying to update the ip_sum
without causing an exception on non-i386 hardware.

I've never been able to reproduce this problem, but it has been
reported by many people... besides, the code is now a bit cleaner.

Testing & patience by: Anthony Solovjoff <asolovjoff@hotmail.com>
1999-10-13 07:49:13 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
ad21dff290 Oops - add a missing cast. 1999-07-10 00:08:19 +00:00
Brian Somers
32bd4110d5 Leap through one more hoop to avoid alignment problems. 1999-07-10 00:03:58 +00:00
Brian Somers
3377c28cd9 Deal with the fact that as we now mbuf_Read the fsm
header in fsm_Input() we often end up with a NULL mbuf.

Deal with a possible NULL mbuf being passed into
mbuf_Prepend().

Adjust some spacing to make things more consistent.
1999-05-09 20:02:29 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
32c75b7dab Oops - remove register keyword 1999-03-31 13:44:07 +00:00
Brian Somers
d3b121132a Another alignment bogon. 1999-03-31 13:33:43 +00:00
Brian Somers
c2b0f58ca3 Point at cs.slcs_u.csu_ip instead of the just-copied ``cp''
when recalculating the ip checksum.  cp is not guaranteed to
be aligned.  It now doesn't matter that cp isn't aligned as
the caller does another mbuf_Alloc() regardless.
1999-03-30 07:57:22 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
5a72b6eda3 Put the IP buffer queues into struct ipcp.
Forgotten by: me
1998-08-26 17:39:37 +00:00
Brian Somers
3f06c5995f Don't assume ``sizeof(u_long) == 4''
Submitted by: Theo
1998-06-27 12:03:50 +00:00
Brian Somers
c9e11a112d Fix a rather nasty use of `static'. This caused a SEGV
when running ``link * load label'' as we ended up recursing
back into command_Interpret after nuking our command arg list.
1998-06-15 19:06:25 +00:00
Brian Somers
42c57c8682 o Pass our negotiated number of VJ slots into
sl_uncompress_tcp() and drop packets with
  slot numbers that are out of range.
o Drop packets that want to use a slot that still
  has an IP header length of 0 (ie, the requested
  slot number is bogus again).

Without this code, if the other side mis-behaves (and
sends us garbage slot numbers), we happily ``adjust''
a memset(..., '\0', ...) TCP/IP header and promptly
cr*p all over the stack before returning.... quickly
followed by a SIGBUS.

Dodgy ISP used by, and help locating the problem from: jmz
Problem also seen by: Mourad de Riche <omnibus@image.dk>

There's still a link lockup after this happens, but my
bets are on the other side (who has already started sending
rubbish) being to blame.
1998-06-14 00:56:13 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
1fa665f5b3 o Add the link name to modem diagnostics.
o Create struct mpserver as part of struct mp.
  mpserver creates a unix-domain socket based on the
  peers auth name and endpoint discriminator.  If it
  already exists, ppp will ``pass the link'' over to
  the owner of the socket, joining it into the bundle
  of another ppp invocation, otherwise ppp waits for
  other invocations to pass it links through this
  socket.
  The final piece of code will be the code that flattens
  our datalink info and passes it down this channel
  (not yet implemented).
1998-04-28 01:25:46 +00:00
Brian Somers
e43ebac1c2 Make gcc-2.8.1 build ppp cleanly.
Support OpenBSD again.
1998-04-25 10:49:52 +00:00
Brian Somers
fe3125a0c3 o Use __attribute__ (#ifdef __GNUC__) to type-check
LogPrintf() and prompt_Printf(), and fix the bits
  identified as being wrong as a result.
1998-04-19 23:09:03 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
d24f017be8 Remove unused includes. 1998-04-06 09:12:38 +00:00
Brian Somers
b6217683dc Deglobalise `struct prompt':
o Our diagnostic socket has its password set in the `set socket'
    line only (not in ppp.secret).
  o Passwords are per server socket (*VarAuthKey are gone)
  o Authority is per prompt (VarLocalAuth is gone).
  o Local logging is per prompt.
  o Add a `show who' command to see who's connected.  No identd
    routine - just a `where the connection came from' display.
  o SIGUSR1 is disabled for now - we have no way of choosing a
    password for the socket created :-(

Prompts are attached as a list of `struct descriptor's in
struct bundle, and serviced under the bundles descriptor
service routines.  Ultimately, everything should be done
like this.

Cosmetic:
  o alphabeticalise SRCS in Makefile.
  o Add a few comments in command.h

TODO: Start checking that we don't overflow the descriptor sets
      in select() now that we can have any number of descriptors.
1998-04-03 19:26:02 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00
Brian Somers
eaa4df37f4 Move VJ compression state and stats into struct ipcp. 1998-03-16 22:54:35 +00:00
Brian Somers
85b542cf4f Move the terminal/diagnostic socket stuff out of main.c
and into the new `prompt.c'.  struct prompt is (of course)
a `sort' of descriptor.
1998-02-10 03:23:50 +00:00
Brian Somers
29e275cee4 o Move global/static IPCP data into IpcpInfo.
o Use INADDR_ANY and INADDR_BROADCAST instead of 0 and 0xffffffff
  for IP addresses & masks.
o Move struct compreq into ipcp.c (it's none of anyone elses
  business).
o Rename MAX_STATES to MAX_VJ_STATES.
1998-01-29 23:11:44 +00:00
cvs2svn
1ae349f52c This commit was manufactured by cvs2svn to create branch 'MP'. 1998-01-29 00:44:16 +00:00
Brian Somers
70ee81ff6b Cosmetic (style):
sizeof(var) -> sizeof var
  sizeof type -> sizeof(type)

Suggested by: J Wunsch <j@uriah.heep.sax.de>
1997-12-24 09:29:17 +00:00
Brian Somers
b6e82f33ef Fix prototypes.
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.

We can now survive a compile with
  -Wall -Wbad-function-cast -Wcast-align -Wcast-qual
  -Winline -Wmissing-declarations -Wmissing-prototypes
  -Wnested-externs -Wpointer-arith -Wredundant-decls
  -Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
1997-11-22 03:37:54 +00:00
Brian Somers
75240ed178 Cosmetic (no functional changes):
o   Add missing $Id$s
o   Move extern decls from .c -> .h files
o   Staticize
o   Remove #includes from .h files
o   style(9)ify includes
o   bcopy -> memcpy
    bzero -> memset
    bcmp -> memcmp
    index -> strchr
    rindex -> strrchr
o   Move timeout.h -> timer.h (making it consistent w/ timer.c)
o   Add -Wmissing-prototypes
1997-10-26 01:04:02 +00:00
Brian Somers
6f59cd11ea Un-spam ip_sum (arrgh - I don't know how this made
it into my patches :()
1997-10-12 21:43:55 +00:00
Brian Somers
03604f3574 Support VJ maximum slot identifiers != 15.
Support VJ slot id compression.

Previously, ppp would negotiate a max slot between 2 & 15
(if asked), and would agree to slot id compression (if asked).
It would then proceed to use 16 slots and no compression
anyway.  The result was a rather unusable connection.
1997-10-07 00:56:58 +00:00
Brian Somers
944f709824 Make the code format more in line with style(9).
Update loadalias to use the new libalias api.
Update to version 1.1.
1997-08-25 00:29:32 +00:00
Brian Somers
927145be97 Overhaul ppp:
o Use syslog
  o Remove references to stdout/stderr (incl perror())
  o Introduce VarTerm - the interactive terminal or zero
  o Allow "set timeout" to affect current session
  o Change "set debug" to "set log"
  o Allow "set log [+|-]flag"
  o Make MSEXT and PASSWDAUTH stuff the default
  o Move all #ifdef DEBUG stuff into the code - this
    shouldn't be too much overhead.  It's now controlled
    with "set log +debug"
  o Add "set log command, debug, tun, warn, error, alert"
  o Remove cdefs.h, and assume an ansi compiler.
  o Improve all diagnostic output
  o Don't trap SIGSEGV
  o SIGHUP now terminates again (log files are controlled
    by syslog)
  o Call CloseModem() when changing devices
  o Fix parsing of third arg of "delete"

I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten.  It'll follow soon.
1997-06-09 03:27:43 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
David Greenman
dc7c7b9221 Fix editing mistake in last commit...sorry. 1996-04-11 08:24:04 +00:00
David Greenman
a78ca332ec Bugfix based on a kernel fix:
When PPP gets an uncompressed packet, it attempts to save off the TCP/IP
header for use in decompressing subsequant packets. If PPP gets garbage
(such as what happens when there is a port speed mismatch or modem line
noise), it will occasionally mistake the packet as a valid uncompressed
packet. When it tries to save off the header, it doesn't bother to check
for the validity of the header length and will happily clobber not only
the PPP VJC data structure, but parts of other process memory that happens
to follow it...causing, ahem, undesired behavior.
1996-04-11 08:14:44 +00:00
Poul-Henning Kamp
ed6a16c181 Final cleanup for now. -Wall is now silent. A couple of bogons found. 1996-01-11 17:48:59 +00:00
Rodney W. Grimes
709e8f9ae1 Remove trailing whitespace. 1995-05-30 03:57:47 +00:00