Commit Graph

33 Commits

Author SHA1 Message Date
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Poul-Henning Kamp
0b7ed341e1 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
John Baldwin
fe6301c61c Chase the musical variable names.
Pointy hat to:	jhb
Reported by:	des
2003-02-25 22:48:33 +00:00
John Baldwin
e1159d10c0 Limit the maximum I/O size to 8 pages for version 2 controllers. This
fixes problems with some mlx(4) cards in Alpha machines.

Reviewed by:	msmith (ages ago)
2003-02-25 20:47:22 +00:00
John Baldwin
464e014eb9 Fix a small fat-finger: s/mlxd/mxld/.
Reported by:	Bob Willcox <bob@immure.com>
2003-02-25 20:35:56 +00:00
Poul-Henning Kamp
b2fe65c5be NO_GEOM cleanup:
Move to "struct disk*" centric API.
Retire major #131 (mlxd)
2003-02-25 07:35:41 +00:00
Poul-Henning Kamp
b82ff75854 NO_GEOM cleanup:
Change the argument to disk_destroy() to be the same struct disk * as
disk_create() takes.

This enables drivers to ignore the (now) bogus dev_t which disk_create()
returns.
2003-02-21 15:13:26 +00:00
Poul-Henning Kamp
7812d86f03 (This commit touches about 15 disk device drivers in a very consistent
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)

If struct disklabel is the messenger: kill the messenger.

Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer).  This commit changes this communication to use four
explicit fields instead.

Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.

Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.

The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.

This concludes (modulus any mistakes) the series of disklabel related
commits.

I belive it all amounts to a NOP for all the rest of you :-)

Sponsored by:   DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Mike Smith
15fd5d220f Driver modifications consistent with my other drivers to facilitate
the use of a single set of sources across 4.x and 5.x branches.

No significant code changes.
2001-06-25 04:32:31 +00:00
Peter Wemm
14aa34173c Fix warning: 193: warning: label `done' defined but not used 2001-06-15 00:13:54 +00:00
Poul-Henning Kamp
079f2df393 Make the disk mini-layer check for and handle zero-length transfers
instead of the underlying drivers.
2001-05-06 21:55:22 +00:00
Poul-Henning Kamp
a468031ce8 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Mike Smith
baff09db2c Change the way that scatter/gather list tables are allocated so that we
can use all of the s/g entries available on smaller cards.  This is
necessary if we want to be able to handle a non-page-aligned 64k transfer
on 2.x and 3.x firmware.

Fix a missing splx() that may have left us at splbio() for longer than
desired.

Reduce shadowing of controller-supplied parameters a little.
2000-05-06 08:54:33 +00:00
Poul-Henning Kamp
9626b608de Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Mike Smith
421f2f7d74 Add features required for basic userland management utility:
- implement user-initiated background drive rebuild
 - implement user-initiated background consistency check
 - log controller-initiated background rebuild/check operations

Try to fix the elusive "invalid log operation" bug, and panic if we do
hit this one in the hopes of getting better information.

Tidy up diagnostic messages.

Try to use disk_create/disk_destroy correctly.  This isn't working
properly yet, but it's not clear whose fault that is.
2000-04-11 02:52:46 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Mike Smith
da8bb3a3bf Update to the latest development version of the Mylex driver. Changes in
this version include:

 - Support for version 2.x firmware (2.42 or later recommended).  This
   means we are the only open-source driver supporting these adapters.
   This code has only been tested on a Digital KZPCA adapter in an Alpha
   system, but is believed to be correct.  NOTE: EISA adapters are not
   yet supported.

 - Support the BIOS/Firmware initialisation handshake protocol.  This
   allows the driver to bring the card up to operational state even if
   the BIOS can't be run (eg. if it's an x86 BIOS in an Alpha system).

 - A working command pasthrough interface.  This allows a user-space
   configuration tool (under development) to issue arbitrary commands
   to the controller or to devices in the system.
2000-03-18 02:01:37 +00:00
Mike Smith
9eee27f16d Updates resulting from new documentation from Mylex and some cleaning:
- Don't keep private copies of some of the data fields from the
   ENQUIRY and ENQUIRY2 commands.  Instead, standardise on the ENQUIRY2
   command for initial adapter information, and keep a copy of the entire
   structure.  Refer to it where appropriate.

 - Move all of the controller description functionality into a new
   function.  Print lots more controller data if bootverbose is set.
   Add knowledge of the DAC960 PR, PT, PTL0 and PRL controllers, rename
   the 960PTL -> PTL0 and 1100P -> 1100PVX.

 - Correctly terminate an error message.

The controller interface procedures have been reviewed against the
Mylex-supplied documentation; no changes appear necessary at this
time.
1999-12-22 01:21:28 +00:00
Mike Smith
5792b7fe0b Major update to the Mylex DAC960 driver adding new hardware support
and fixing some major bugs.

 - Add support for the v5 firmware interface, used by the DAC1164P
   (tested) and AcceleRAID 352 (untested but should work).  We now cover
   all of the Mylex family's protocols except for v2 (used by EISA and
   Alpha-compatible cards).

 - Fix an accounting bug which resulted in endless 'poll still busy'
   messages.  In situations of high controller load the count of poll
   commands could be incremented without actually successfully launching
   a command.  This totally removes the accounting for status poll
   commnads; it was its own worst enemy.

 - Add some simple reentry prevention locks to processing of the waiting
   and completed command queues to prevent races which could result in
   I/O being done or completed twice (both are fatal).  This highlights
   a need for simple locking primitives in both the UP and SMP kernels.

 - Streamline the handling of command completion to reduce the amount of
   redundant work being done.  Remove the code which tests for commands
   that have gone missing in action; nobody has ever seen one of these
   and it wouldn't have worked properly anyhow.

 - Handle disconnection of drives from the controller in the detach,
   not shutdown method.  This avoids problems flushing the cache in
   a panic when a drive is mounted.

 - Don't call bus_generic_detach when disconnecting drives; it doesn't
   actually do anything useful.

 - Increment the log message index regardless of whether we actually
   retrieved one or not.  If we run into a message that we can't fetch,
   we don't want to spin endlessly complaining about the fact.

 - Don't assume that interrupts will work when we're flushing the
   controller.  We may think they are enabled, but in eg. a panic
   situation the controller may not be able to deliver an interrupt.
1999-12-11 00:00:13 +00:00
Kenneth D. Merry
86b2c8466d Revamp the devstat priority system. All disks now have the same priority.
The same goes for CD drivers and tape drivers.  In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.

Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.

This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.

This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.

Reviewed by:	msmith, sos, phk, jlemon, mjacob, bde
1999-12-08 04:45:23 +00:00
Mike Smith
97adfbaf83 Correctly compute the block count. In reality, it seems that the
controller will never return the command if it's not exactly a multiple
of a block in size.

Cosmetic formatting for RAID level output.
1999-11-02 03:25:24 +00:00
Mike Smith
4b006d7bb7 Move some hardware-related items to the hardware-related header.
Shift to using the same queueing strategy that the amr driver uses.
Some simple tests indicate that we use about 2% of the CPU at around
500tps with the controller completely saturated with I/O.
1999-10-26 23:20:43 +00:00
Mike Smith
f01f2af67a Save the drive device_t correctly so we can print it later.
The drive number is 5 bits, not 4, in the read/write command.
1999-10-16 01:46:59 +00:00
Mike Smith
f6b84b08c9 Add support for the version 4 firmware interface and the DAC960 PG and
PJ cards.  This will probably also support the AcceleRAID and
eXtremeRAID cards, but nobody has volunteered one for testing, so I
haven't enabled their PCI device IDs.

Slightly clean up communication between the disk devices and the
controller device as per new practice, and move some more register-
related items int mlxreg.h from mlxvar.h.

Remove some unnecessary read-modify-write operations to the card
control registers; they don't behave like that.

Increase the status polling interval to 10 seconds.  It's still possible
to load the card up to the point where a status poll will find the
previous poll still running, but this will reduce the incidence of
complaints.
1999-10-14 02:54:06 +00:00
Mike Smith
1ac4b82b11 This is a driver for the Mylex DAC960 family of integrated RAID
controllers.  It currently supports the P, PL, PD and PU variants,
with more to be supported shortly.
1999-10-07 02:20:32 +00:00