Commit Graph

511 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
a380994fff Yet more redundant parenthesis from r298431.
Mea culpa.
2016-04-21 20:30:38 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Justin Hibbits
43cd61606b Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()
Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differential Revision: https://reviews.freebsd.org/D5306
2016-02-19 03:37:56 +00:00
Gleb Smirnoff
8ec07310fa These files were getting sys/malloc.h and vm/uma.h with header pollution
via sys/mbuf.h
2016-02-01 17:41:21 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Warner Losh
efd2408900 Add PNP info for ISA and PCI to the ed driver to prove design.
Differential Review: https://reviews.freebsd.org/D3458
2015-12-11 05:28:07 +00:00
Warner Losh
f6cea53f9d Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building
block. Use it in all the PNP drivers to export either the current PNP
table. For uart, create a custom table and export it using
MODULE_PNP_INFO since it's the only one that matches on function
number.

Differential Review: https://reviews.freebsd.org/D3461
2015-12-11 05:27:56 +00:00
Warner Losh
679f3f62a8 Unlock the main lock before returning rather than after to eliminate
dead code that shouldn't have been dead.

Reported by: Maxime Villard
2015-03-01 21:41:33 +00:00
Warner Losh
8b704a1c2b Fix typo
Submitted by: matteo@
2015-02-04 16:19:31 +00:00
Warner Losh
022abe003f Add comment about why checking for 0xff is OK. There's two bits in the
ISR that are normally clear. RST is one, though in some overflow cases
it can be set. RDC is only set when a remote DMA is finished from the
memory mapped memory to the transmit rings, which we poll fore in the
code with ED_LOCK around the operation that would set it.
2015-02-04 15:59:51 +00:00
Robert Watson
2a8c860fe3 In order to reduce use of M_EXT outside of the mbuf allocator and
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself.  Update all callers to use the return value.

With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.

NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices.  Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.

Differential Revision:	https://reviews.freebsd.org/D1440
Reviewed by:	adrian, bz, gnn
Sponsored by:	EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Marius Strobl
67d363915b Add bus space barriers for page switches missed in r260050. 2014-02-05 22:21:08 +00:00
Marius Strobl
f6030d6ac1 - Switch to using the common MII bitbang'ing code instead of duplicating it.
- Based on lessons learnt with dc(4) (see r185750), add bus space barriers to
  the MII bitbang read and write functions as well as to instances of page
  switching.
- Add missing locking to ed_ifmedia_{upd,sts}().
- Canonicalize some messages.
- Based on actual functionality, ED_TC5299J_MII_DIROUT should be rather named
  ED_TC5299J_MII_DIRIN.
- Remove unused headers.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 19:21:59 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Pyun YongHyeon
e9d7727e6b Fix off by one error in mbuf access. Previously it caused panic.
While I'm here use NULL to compare mbuf pointer and add additional
check for zero length mbuf before accessing the mbuf.

PR:	kern/162932
2011-12-05 18:10:43 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Warner Losh
253953cd5b On second thought, we need to force 16-bit mode 2010-08-25 02:09:07 +00:00
Warner Losh
e94b9f21a8 Prodded by Yongari, add support for Holtek HT80232. Add the device
ID, plus the ability to force '16-bit mode' which really means NE-2000
mode.  Other open source drivers suggest that the Holtek misbehaves if
you allow the 8-bit probe.  Also, all of the PCI chips emulate
NE-2000ish cards, so always force 16-bit mode for memory transfers.

PR:		84202 (patch not used)
2010-08-25 02:03:48 +00:00
Pyun YongHyeon
7c45b43651 Add PNP id for Compex RL2000.
I'm not sure whether adding this logical id is correct or not
because Compex RL2000 is in the list of supported hardware list.
I guess the Compex RL2000 could be PCI variant while the controller
in question is ISA controller. It seems PNP compat id didn't match
or it had multiple compat ids so isa_pnp_probe() seemed to return
ENOENT.

PR:	kern/80853
2010-08-24 18:17:40 +00:00
Pyun YongHyeon
820b53e152 Fix a possible unaligned access to savebyte array.
PR:	kern/122195
2010-08-23 21:40:03 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
John Baldwin
b1f459a01b Use a private callout timer to drive the transmit watchdog instead of using
if_watchdog and if_timer.  The driver already contained an optional stats
timer that individual attachments could use to provide a 'tick' event.  The
stats timer only ran if the tick function pointer was non-NULL and the
attachment's tick routine had to call callout_reset(), etc.  Now the driver
always schedules a stat timer and manages the callout_reset() internally.
This timer is used to drive the watchdog and will also call the attachment's
'tick' handler if one is provided.

Tested by:	WATANABE Kazuhiro
2009-11-17 14:23:09 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Warner Losh
d47f0d75af ifp->if_softc is managed entirely by the driver. We never set it to
NULL or change it.  We initialize it before we set if_ioctl.  It can
therefore never be NULL, and most other drivers don't bother with this
sanity check.
2009-05-13 14:43:26 +00:00
Warner Losh
1c51765e41 Add Surecom EP-427X. 2009-04-24 17:28:12 +00:00
Warner Losh
1d00d5ed3c A couple of older Melco cards that missed the transition to newcard 2009-04-22 16:51:01 +00:00
Warner Losh
9ac15d8cea Add Billionton LNT10TB 2009-04-22 15:57:22 +00:00
Warner Losh
52641d220c Add a few more models of AMBICOM cards from data from linux driver and
pccard.conf.
2009-04-22 15:13:20 +00:00
Warner Losh
eba0fd149d These were a placeholder and don't belong here. Remove them. 2009-04-22 15:01:08 +00:00
Warner Losh
ffed9ec58d Kill stray bootverbose debug tool.
Submitted by:	juli@
2009-04-22 06:33:26 +00:00
Warner Losh
31de65dd02 Turns out the code improvements I did for the TC5299J support were
anti-improvements and broke support for this part.  Revert the part of
the improvement at fault.
2009-04-22 06:30:24 +00:00
Warner Losh
98f751cd4b Sometimes we can call ed_detach() before the mtx has been initialized.
Avoid it if it hasn't been initialized.
2009-04-20 15:19:54 +00:00
Warner Losh
472dfd2aeb Cleanup resource allocation code a bit. Store the rids on the
resources rather than on the softc.  When we allocate resources for PC
Card, if we only get 16 ports, try again to get the others.
2009-04-20 01:19:59 +00:00
Warner Losh
77944b3551 Make sure that the data in the ROM with a valid signature isn't all
0's.  At least one PC Card ASIC does this...
2009-04-18 04:45:02 +00:00
Warner Losh
f2731d8565 Add GVP NIC 2000P and New Media Livewire. Also New Media LanSurfer
doesn't have a function type of network, so add a quirk for that...
2009-04-18 04:37:53 +00:00
Warner Losh
74677fb82b Establish the interrupt handler AFTER we successfully attach. We need
to do this in case we have a shared interrupt that fires during the
attach process....
2009-04-18 03:10:28 +00:00
Warner Losh
77a6714a6d Remove debug write accidentally left in. 2009-04-18 03:02:44 +00:00
Warner Losh
f20765ea29 Don't specify a hint, since it isn't needed. 2009-04-10 18:46:46 +00:00
Warner Losh
56d67d7d37 Fix comment
Submitted by:	danfe@
2009-04-10 17:34:30 +00:00
Warner Losh
0203f7164f Improvements for TC5299J MII support. 2009-04-10 16:12:00 +00:00
Warner Losh
84db505873 The D-Link DE-650 isn't tagged as a network card, so allow it to
attach anyway.
Add a comment about a 'common' mfg/prod pair that's used in a very
large array of different cards.
2009-04-10 15:33:47 +00:00
Warner Losh
613dabd54f Fix some comments. 2009-04-10 15:30:19 +00:00