over various major releases. Superblock check hashes were added for
the 12 release and cylinder-group and inode check hashes will appear
in the 13 release.
When a disk with a UFS filesystem is writably mounted, the kernel
clears the feature flags for anything that it does not support. For
example, if a UFS disk from a 12-stable kernel is mounted on an
11-stable system, the 11-stable kernel will clear the flag in the
filesystem superblock that indicates that superblock check-hashs
are being maintained. Thus if the disk is later moved back to a
12-stable system, the 12-stable system will know to ignore its
incorrect check-hash.
If the only filesystem modification done on the earlier kernel is
to run a utility such as growfs(8) that modifies the superblock but
neither updates the check-hash nor clears the feature flag indicating
that it does not support the check-hash, the disk will fail to mount
if it is moved back to its original newer kernel.
This patch moves the code that clears the filesystem feature flags
from the mount code (ffs_mountfs()) to the code that reads the
superblock (ffs_sbget()). As ffs_sbget() is used by the kernel mount
code and is imported into libufs(3), all the filesystem utilities
will now also clear these flags when they make modifications to the
filesystem.
As suggested by John Baldwin, fsck_ffs(8) has been changed to accept
and repair bad superblock check-hashes rather than refusing to run.
This change allows fsck to recover filesystems that have been impacted
by utilities older than those created after this change and is a
sensible thing to do in any event.
Reported by: John Baldwin (jhb@)
MFC after: 2 weeks
Sponsored by: Netflix
Instead, add arguments to vmapbuf. Since this argument is
always a pointer use a type of void * and cast to vm_offset_t in
vmapbuf. (In CheriBSD we've altered vm_fault_quick_hold_pages to
take a pointer and check its bounds.)
In no other situtation does b_data contain a user pointer and vmapbuf
replaces b_data with the actual mapping.
Suggested by: jhb
Reviewed by: imp, jhb
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26784
Normally when a buffer with B_BARRIER is written, the flag is cleared
by g_vfs_strategy() when creating bio. But in some cases FFS buffer
might not reach g_vfs_strategy(), for instance when copy-on-write
reports an error like ENOSPC. In this case buffer is returned to
dirty queue and might be written later by other means. Among then
bdwrite() reasonably asserts that B_BARRIER is not set.
In fact, the only current use of B_BARRIER is for lazy inode block
initialization, where write of the new inode block is fenced against
cylinder group write to mark inode as used. The situation could be
seen that we break dependency by updating cg without written out
inode. Practically since CoW was not able to find space for a copy of
inode block, for the same reason cg group block write should fail.
Reported by: pho
Discussed with: chs, imp, mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26511
switch ufs_stat() to use the same value for st_dev as was used by
the previous ufs_getattr() stat path.
Submitted by: gallatin
Reviewed by: mjg, imp, kib, mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26596
There are several negative side-effects of not calling into VOP layer
at all for page cache reads. The biggest is the missed activation of
EVFILT_READ knotes.
Also, it allows filesystem to make more fine grained decision to
refuse read from page cache.
Keep VIRF_PGREAD flag around, it is still useful for nullfs, and for
asserts.
Reviewed by: markj
Tested by: pho
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
The pointer to vnode is already stored into f_vnode, so f_data can be
reused. Fix all found users of f_data for DTYPE_VNODE.
Provide finit_vnode() helper to initialize file of DTYPE_VNODE type.
Reviewed by: markj (previous version)
Discussed with: freqlabs (openzfs chunk)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
Move v_object creation earlier, so that VIRF_PGREAD is never set if
v_object is NULL. There is no much harm from instantiating v_object
when later check for append-only flags disallows open.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25968
ACLs are not supported, meaning their presence will force the use of the old lookup.
Reviewed by: kib
Tested by: pho (in a patchset)
Differential Revision: https://reviews.freebsd.org/D25579
It is very conservative. Only spinning when LK_ADAPTIVE is passed, only on
exclusive lock and never when any waiters are present. buffer cache is remains
not spinning.
This reduces total sleep times during buildworld etc., but it does not shorten
total real time (culprits are contention in the vm subsystem along with slock +
upgrade which is not covered).
For microbenchmarks: open3_processes -t 52 (open/close of the same file for
writing) ops/s:
before: 258845
after: 801638
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25753
out verbatim to the disk: see ffs_sbput() in sys/ufs/ffs/ffs_subr.c.
It contains a pointer to the fs_summary_info structure. This pointer
value inadvertently causes garbage to be stored. It is garbage because
the pointer to the fs_summary_info structure is the address the then
current stack or heap. Although a mere pointer does not reveal anything
useful (like a part of a private key) to an attacker, garbage output
deteriorates reproducibility.
This commit zeros out the pointer to the fs_summary_info structure
before writing the out the superblock.
Reviewed by: kib
Tested by: Peter Holm
PR: 246983
Sponsored by: Netflix
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix
module from that file into ffs_vfsops.c. This fixes the build for kernel
configs that don't include FFS.
PR: 247256
Submitted by: glebius
Reviewed by: mckusick (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25285
Since mnt_flags was upgraded to 64bits there has been a quirk in
"struct export_args", since it hold a copy of mnt_flags
in ex_flags, which is an "int" (32bits).
This happens to currently work, since all the flag bits used in ex_flags are
defined in the low order 32bits. However, new export flags cannot be defined.
Also, ex_anon is a "struct xucred", which limits it to 16 additional groups.
This patch revises "struct export_args" to make ex_flags 64bits and replaces
ex_anon with ex_uid, ex_ngroups and ex_groups (which points to a
groups list, so it can be malloc'd up to NGROUPS in size.
This requires that the VFS_CHECKEXP() arguments change, so I also modified the
last "secflavors" argument to be an array pointer, so that the
secflavors could be copied in VFS_CHECKEXP() while the export entry is locked.
(Without this patch VFS_CHECKEXP() returns a pointer to the secflavors
array and then it is used after being unlocked, which is potentially
a problem if the exports entry is changed.
In practice this does not occur when mountd is run with "-S",
but I think it is worth fixing.)
This patch also deleted the vfs_oexport_conv() function, since
do_mount_update() does the conversion, as required by the old vfs_cmount()
calls.
Reviewed by: kib, freqlabs
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25088
synchronous inode update.
The IN_SIZEMOD and IN_IBLKDATA flags indicate changes to the
file size and block pointer fields in the inode. When these
fields have been changed, the fsync() and fsyncdata() system
calls must write the inode to ensure their semantics that the
file is on stable store.
The IN_SIZEMOD and IN_IBLKDATA flags cannot be cleared until
a synchronous write of the inode is done. If they are cleared
on an asynchronous write, then the inode may not yet have been
written to the disk when an fsync() or fsyncdata() call is done.
Absent these flags, these calls would not know that they needed
to write the inode. Thus, these flags only can be cleared on
synchronous writes of the inode. Since the inode will be locked
for the duration of the I/O that writes it to disk, no fsync()
or fsyncdata() will be able to run before the on-disk inode
is complete.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
requires that new data on growing files be accessible. Thus, the
the fsyncdata() system call must update the on-disk inode when the
size of the file has changed.
This commit adds another inode update flag, IN_SIZEMOD, that gets
set any time that the file size changes. If either the IN_IBLKDATA
or the IN_SIZEMOD flag is set when fdatasync() is called, the
associated inode is synchronously written to disk. We could have
overloaded the IN_IBLKDATA flag to also track size changes since
the only (current) use case for these flags are for fsyncdata(),
but it does seem useful for possible future uses to separately
track the file size changes and the inode block pointer changes.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
The fdatasync() description in POSIX specifies that
all I/O operations shall be completed as defined for synchronized I/O
data integrity completion.
and then the explanation of Synchronized I/O Data Integrity Completion says
The write is complete only when the data specified in the write
request is successfully transferred and all file system
information required to retrieve the data is successfully
transferred.
For UFS this means that all pointers must be on disk. Indirect
pointers already contribute to the list of dirty data blocks, so only
direct blocks and root pointers to indirect blocks, both of which
reside in the inode block, should be taken care of. In ffs_balloc(),
mark the inode with the new flag IN_IBLKDATA that specifies that
ffs_syncvnode(DATA_ONLY) needs a call to ffs_update() to flush the
inode block.
Reviewed by: mckusick
Discussed with: tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25072
the underlying media fails or becomes inaccessible. For example
when a USB flash memory card hosting a UFS filesystem is unplugged.
The strategy for handling disk I/O errors when soft updates are
enabled is to stop writing to the disk of the affected file system
but continue to accept I/O requests and report that all future
writes by the file system to that disk actually succeed. Then
initiate an asynchronous forced unmount of the affected file system.
There are two cases for disk I/O errors:
- ENXIO, which means that this disk is gone and the lower layers
of the storage stack already guarantee that no future I/O to
this disk will succeed.
- EIO (or most other errors), which means that this particular
I/O request has failed but subsequent I/O requests to this
disk might still succeed.
For ENXIO, we can just clear the error and continue, because we
know that the file system cannot affect the on-disk state after we
see this error. For EIO or other errors, we arrange for the geom_vfs
layer to reject all future I/O requests with ENXIO just like is
done when the geom_vfs is orphaned. In both cases, the file system
code can just clear the error and proceed with the forcible unmount.
This new treatment of I/O errors is needed for writes of any buffer
that is involved in a dependency. Most dependencies are described
by a structure attached to the buffer's b_dep field. But some are
created and processed as a result of the completion of the dependencies
attached to the buffer.
Clearing of some dependencies require a read. For example if there
is a dependency that requires an inode to be written, the disk block
containing that inode must be read, the updated inode copied into
place in that buffer, and the buffer then written back to disk.
Often the needed buffer is already in memory and can be used. But
if it needs to be read from the disk, the read will fail, so we
fabricate a buffer full of zeroes and pretend that the read succeeded.
This zero'ed buffer can be updated and written back to disk.
The only case where a buffer full of zeros causes the code to do
the wrong thing is when reading an inode buffer containing an inode
that still has an inode dependency in memory that will reinitialize
the effective link count (i_effnlink) based on the actual link count
(i_nlink) that we read. To handle this case we now store the i_nlink
value that we wrote in the inode dependency so that it can be
restored into the zero'ed buffer thus keeping the tracking of the
inode link count consistent.
Because applications depend on knowing when an attempt to write
their data to stable storage has failed, the fsync(2) and msync(2)
system calls need to return errors if data fails to be written to
stable storage. So these operations return ENXIO for every call
made on files in a file system where we have otherwise been ignoring
I/O errors.
Coauthered by: mckusick
Reviewed by: kib
Tested by: Peter Holm
Approved by: mckusick (mentor)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24088
These two sysctls were added to support UFS softupdates journalling
with snapshots. However, the changes to fsck to use them were never
committed and there have never been any in-tree uses of these sysctls.
More details from Kirk:
When journalling got added to soft updates, its journal rollback freed
blocks that it thought were no longer in use. But it does not take
snapshots into account (i.e., if a snapshot is still using it, then it
cannot be freed). So I added the needed logic to fsck by having the
free go through the kernel's blkfree code so it could grab blocks that
were still needed by snapshots. That is done using the setbufoutput
hack. I never got that code working reliably, so it is still sitting
in my work directory. Which also explains why you still cannot take
snapshots on filesystems running with journalling...
In looking over my use of this feature, and in particular the troubles
I was having with it, I conclude that it may be better to extract the
code from the kernel that handles freeing blocks claimed by snapshots
and putting it into fsck directly. My original intent was that it is
complex and at the time changing, so only having to maintain it in one
place was appealing. But at this point it has not changed in years and
the hacks like setinode and setbufoutput to be able to use the kernel
code is sufficiently ugly, that I am leaning towards just extracting
it.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24484
Forced rw unmounts and remounts from rw to ro already suspend
filesystem, which closes races with writers instantiating new vnodes
while unmount flushes the queue. Original intent of not including
non-forced unmounts into this regime was to allow such unmounts to
fail if writer was active, but this did not worked well.
Similar change, but causing all unmount, even involving only ro
filesystem, were proposed in D24088, but I believe that suspending ro
is undesirable, and definitely spends CPU time.
Reported by: markj
Discussed with: chs, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
hidden bug in the file truncation code. Until that bug is tracked
down and fixed, revert to the old behavior.
Reported by: Peter Holm
Reviewed by: kib, Chuck Silvers
sync it to disk before shrinking it. Complete the sync before getting
the buffer for the block to be updated to do the shrink to avoid
panicing with a recursive lock on one of the directory's buffers.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
boolean expressions so that their values are not lost when assigned to
`bool' or `int' variables.
Reviewed by: Chuck Silvers (chs)
MFC after: 3 days
Sponsored by: Netflix
when a superblock check-hash error is detected. This change clarifies
a mount that failed due to media hardware failures (EIO) from a mount
that failed due to media errors (EINTEGRITY) that can be corrected by
running fsck(8).
Sponsored by: Netflix
This has a side effect of eliminating filedesc slock/sunlock during path
lookup, which in turn removes contention vs concurrent modifications to the fd
table.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D23889
file systems to safely access their disk devices, and adapt FFS to use it.
Also add a new BO_NOBUFS flag to allow enforcing that file systems using
mntfs vnodes do not accidentally use the original devfs vnode to create buffers.
Reviewed by: kib, mckusick
Approved by: imp (mentor)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D23787
The new structure is copy-on-write. With the assumption that path lookups are
significantly more frequent than chdirs and chrooting this is a win.
This provides stable root and jail root vnodes without the need to reference
them on lookup, which in turn means less work on globally shared structures.
Note this also happens to fix a bug where jail vnode was never referenced,
meaning subsequent access on lookup could run into use-after-free.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23884
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718