Commit Graph

81 Commits

Author SHA1 Message Date
Robert Nordier
1b9112ea6b In src/Makefile.inc1:
Remove /sys/boot from legacy-build.
    Add btxld to build-tools.
In src/sys/Makefile:
    Add /sys/boot for i386 ELF.

I'm still not sure why the new boot code was being built along with the
legacy stuff, which meant a completely wrong default environment for it.

This may well still be the wrong way to go about this, but it can't work
all that much worse than it has been.
1998-10-11 18:39:38 +00:00
Peter Wemm
04e2ebf5df Comment about libm and libmd being needed for some libraries.
Prompted by: bde

Also. Don't build & install legacy lkm's when NOLKM has been set.
Otherwise it gets built in the src tree rather than obj, because the
previous 'make obj' at the start of legacy-build does respect NOLKM.
1998-10-11 07:41:31 +00:00
Jordan K. Hubbard
2de520a5a7 Move OBJFORMAT hack to the correct line; what can I say, it was very
late. :)
1998-10-10 19:56:59 +00:00
KATO Takenori
e313ef3368 PC-98 uses different boot code from IBM-PC. So, MACHINE is used
instead of MACHINE_ARCH.

Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1998-10-10 11:16:08 +00:00
Jordan K. Hubbard
07bf7f4a0c Quick commit to see if I can't fix Robert's i386/boot problem in one line.
If this doesn't work, we'll try something else.
1998-10-10 10:54:54 +00:00
Jordan K. Hubbard
322a4708b8 Don't chain makes with &&; apparently this is evil for parallelism.
According to:	bde
1998-10-10 08:21:18 +00:00
Jordan K. Hubbard
87ee69f08a Clean up the boot targets a bit.
Suggested by:	jdp
1998-10-09 22:22:34 +00:00
Jordan K. Hubbard
e2d5656999 Make both types of boot targets. 1998-10-08 09:40:17 +00:00
Mike Smith
400b2cc592 Add libstand to the includes target. 1998-10-05 08:06:45 +00:00
Søren Schmidt
5ca77c0764 Backout my last commit.
Find another way to get the LKM's rebuild.
1998-09-26 01:30:36 +00:00
Søren Schmidt
db8b174ef5 Build the LKM's both on aout & ELF systems.
Reviewed by: jkh
1998-09-25 08:58:49 +00:00
David E. O'Brien
bc767300f5 Add printf(1) to the list of early-build tools.
(needed to build Amd, and causing the -jN crowd problems w/o being here)
((I will revisit the usage of printf(1) in building Amd at a later time))
1998-09-23 10:30:43 +00:00
Mark Murray
51a6b2cbda Complete the Perl NOSHARED repair. I had not ensured that the shared library
was constructed early enough, so perl was linking against the static lib.
This was breaking perl under ELF, as perl could not load shared objects
(in fact would dump core).
1998-09-23 06:11:35 +00:00
John Birrell
b510e4c210 Remove the bootstrap-rtld target which wasn't needed.
Install the rest of the legacy libraries (like libgcc.a, libl.a).

Add games to the user's path to avoid the temptation for people to
hack paths to unsuitable tools.
1998-09-21 08:55:50 +00:00
Andreas Klemm
52984c0442 Purely cosmetic but useful change.
Make output of make world more readable for grep. Now a
	grep '>>>' world.log
shows you the single stages through which the bootstrap
process went as discussed on -current. Could be used to
debug the bootstrap mechanism in case of trouble more
easily. Would be fine if any further @echo "..." messages
containing a description, what's going on, could use the
new format: @echo ">>> ..."
1998-09-17 16:32:00 +00:00
Poul-Henning Kamp
d80044954c Two patches from the HARP people:
Various Makefile related fixes.

-Wformat fixes.

Submitted by:	Mike Spengler <mks@networkcs.com>
1998-09-17 09:35:02 +00:00
Justin T. Gibbs
c3deaba902 libscsi is obsoleted by CAM. 1998-09-17 03:56:23 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
7004be9b34 Hook up beforeinstall targets for libcam and libdevstat 1998-09-15 07:46:17 +00:00
David E. O'Brien
c4e8b7e41e I don't want to be the only one to use `cut''. Use `sed'' instead. 1998-09-10 00:27:57 +00:00
David E. O'Brien
8f748848d8 Add ``usr/bin/cut'' to "build-tools" target.
Used in usr.sbin/amd/include/newvers.sh.
1998-09-10 00:13:48 +00:00
Mark Murray
ddf0071c01 Remove the NOPERL block to building Perl5.
Perl 5 will rebuild/bootstrap itself next time a make world is done
with this in effect.
1998-09-09 19:30:45 +00:00
Mark Murray
fad8371bdd Add the Perl5 bootstrap tools. 1998-09-09 17:30:30 +00:00
Mark Murray
62dfd75aa2 Another place to set NOPERL. 1998-09-09 06:01:37 +00:00
Satoshi Asami
ff5fcc93d4 Remove tcl from /usr/src, according to prior agreement. BTW, tcl-8.0 *is*
a port so there is nothing to be done on that side now.

Approved by:	jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700

>decision is, I'll respect it.

   Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
   Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
   As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
   Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.

-DG

David Greenman
Core-team/Principal Architect, The FreeBSD Project
1998-09-05 12:25:55 +00:00
John Birrell
d64c14ce31 Change i386 in a few paths to ${MACHINE} to support MACHINE=pc98. 1998-09-05 11:37:14 +00:00
John Birrell
146cbe7e06 Only run ldconfig if the OBJFORMAT is aout. 1998-09-03 21:34:31 +00:00
John Birrell
741d299c21 Force NOMAN and NOINFO on legacy-install as well as legacy build. 1998-09-01 06:07:47 +00:00
John Birrell
ff1284f6c0 Add a target to check the consistency of the make OBJFORMAT variable
with the object format determined by objformat. This prevents foot
shooting (a form of boot scooting for hackers?) where local changes
to /etc/make.conf or /etc/make.conf.local try to override OBJFORMAT
in an incomplete way.
1998-09-01 00:39:02 +00:00
John Birrell
f471c44869 MACHINE -> MACHINE_ARCH to allow PC98 to define MACHINE=pc98.
Submitted by: Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1998-08-31 20:48:13 +00:00
John Birrell
11fb97daa7 E-day build system changes.
- Moved most of the guts of Makefile to Makefile.inc1 to become the
  backend for the build system.
- The new Makefile doesn't suffer from problems including the wrong
  sys.mk because it doesn't use anything in there or bsd.own.mk. So,
  from now on, the proper build command is just `make world' (or
  buildworld).
- The intermediate makefiles called Makefile.inc0 and Makefile.upgrade
  fiddle with the OBJFORMAT and MAKEOBJDIRPREFIX variables so that
  both aout and elf object trees can coexist. Makefile.upgrade contains
  the aout->elf transition build.
- A cross build environment is now very close to reality. Specifying
  TOOLDIR, setting OBJFORMAT and MAKEOBJDIRPREFIX allow that.

See the comments in Makefile for more info.
1998-08-31 01:08:08 +00:00