Commit Graph

278 Commits

Author SHA1 Message Date
Eric van Gyzen
f9cc8410e1 vm_ooffset_t is now unsigned
vm_ooffset_t is now unsigned. Remove some tests for negative values,
or make other adjustments accordingly.

Reported by:	Coverity
Reviewed by:	kib markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D26214
2020-09-18 16:48:08 +00:00
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Warner Losh
58aa35d429 Remove sparc64 kernel support
Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs
2020-02-03 17:35:11 +00:00
Scott Long
2058e7dbde Stop the VESA driver from whining loudly in the dmesg during boot on
systems that use EFI instead of BIOS.
2019-11-13 15:31:31 +00:00
Conrad Meyer
e12be3218a Include eventhandler.h in more compilation units
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility.  Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.

(These CUs did not show up as missing eventhandler.h in tinderbox.)

X-MFC-With:	r347984
2019-05-21 01:18:43 +00:00
Konstantin Belousov
9a52756044 i386: Merge PAE and non-PAE pmaps into same kernel.
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.

Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.

Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.

i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.

The PAE_TABLES kernel config option is retired.

In collaboarion with: pho
Discussed with:	emaste
Reviewed by:	markj
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D18894
2019-01-30 02:07:13 +00:00
Pedro F. Giffuni
ac2fffa4b7 Revert r327828, r327949, r327953, r328016-r328026, r328041:
Uses of mallocarray(9).

The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.

Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.

Reported by:	wosch
PR:		225197
2018-01-21 15:42:36 +00:00
Pedro F. Giffuni
26c1d774b5 dev: make some use of mallocarray(9).
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.

This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
2018-01-13 22:30:30 +00:00
Pedro F. Giffuni
796df753f4 SPDX: Consider code from Carnegie-Mellon University.
Interesting cases, most likely from CMU Mach sources.
2017-11-30 15:48:35 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Pedro F. Giffuni
7282444b10 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:36:21 +00:00
Konstantin Belousov
be4bf62684 Write-combine framebuffer writes through user-space mappings, if possible.
Note that KVA mapping of the framebuffer already uses write-combining
mode, so the change, besides improving speed of user mode writes, also
satisfies requirement of the IA32 architecture of using consistent
caching modes for multiple mappings of the same page.

Reported and tested by:	bde
Sponsored by:	The FreeBSD Foundation
MFC after:	 1 week
2017-04-20 15:18:15 +00:00
Bruce Evans
ecb56aaf60 Attempt to determine the modes in which 8-bit wide characters are actually
9 wide.

I only need this to improve the mouse cursor, but it has always been
needed to select and/or adjust fonts.

This is complicated because there are no standard parameter tables
giving this bit of information directly, and the device register bit
giving the information can't be trusted even if it is read from the
hardware.  Use a heuristic to guess if the device register can be
trusted.  (The device register is normally read from the BIOS mode
table, but on my system where the device register is wrong, the mode
table doesn't match the hardware and is not used; the device registers
are used in this case.)
2017-04-20 13:46:55 +00:00
Bruce Evans
7b8306bcd2 When we don't use the parameter table in the BIOS, also don't use most
of our tweaked modes based on it.  In practice, this means limiting the
tweaked modes to at most 80x50 based on 80x25, so there are no 90-column,
80x30 or 80x60 modes.

This happens when the the initial mode is is not in the parameter
table.  We always detected this case, but assumed that the (necessarily
nonstandard) parameters of the initial mode could be tweaked just as
blindly as the probably-standard parameters of initial modes in the
table.

On 1 laptop system with near-VGA where the initial mode is nonstandard,
this is because the hardware apparently doesn't support 9-bit mode,
but otherwise has standard timing.  The initial mode has 8-bit mode
CRTC horizontal parameters similar to those in syscons' 90-column modes
and in EGA modes.  Tweaking these values for the 90-column modes has
little effect except to print the extra 10 columns off the screen.
Tweaking from 80x25 to 80x30 requires changing from 400 scan lines to
480.  This can probably be made to work, but syscons blindly applies
values based on standard timing.  This gives blank output.  Tweaking
from 80x25 to 80x50 doesn't change the CRTC timing and works.
2017-04-19 14:49:18 +00:00
Bruce Evans
3a98d83edb Reset the DAC to 6-bit mode before calling the BIOS to set the screen
mode.  This works around bugs in at least 2 Intel BIOSes for our
subsequent setting of the DAC back to 8-bit mode.  The bug caused dark
(mostly 1/4-intensity) colors for all except the first setting to a
VESA graphics mode (including for settings to the current mode).

Remove restoration (with less bits) of the palette in vesa_unload()
after resetting the DAC to 6-bit mode.  Depend on the BIOS to keep
the palette consistent with the DAC for the simpler reset case like
we do everywhere else in places that are actually important.

Setting the video mode should reset everything to defaults, although
we usually don't want that.  Even the buggy BIOSes set the DAC to the
default 6-bit mode, and set the palette to a default that matches the
DAC.  We don't undo the reset for most things, but we do undo it for
the DAC (more precisely, we change to an 8-bit DAC if possible, and
this is the only way that we set to an 8-bit DAC; it is accidental
that if the DAC was in 8-bit mode from a previous mode switch then
setting it to 8-bit mode is an undo).  The buggy BIOSes are confused
by our setting of the DAC to 8-bit mode in the "undo" case.  They
should multiply palette entries by 4 to match, but they actually leave
all palette entries except #2 (green) and #248-255 (unused) untouched.
Green is mysteriously scaled from 0x2a to 0x6a, and #248-255 are scaled
correctly.

Our support for the 8-bit DAC had almost no effect except to enable
bugs.  Syscons barely supports 16 colors, so it doesn't benefit much
from having a palette with 16 million colors instead of only 256K.
Applications can manage the palette using FBIO_{GET,SET}PALETTE, but
the palette managed by this is only used in the less interesting modes
(text and non-truecolor graphics modes up to 8 bits wide), and the
kernel loses the changes on any mode switch (including to another vt
in a different mode).
2017-04-02 08:39:32 +00:00
Bruce Evans
89a1e6c3eb Fix 3 entries in mode tables related to mono and 90-column text modes.
Newer VGAs don't support any mono modes, but bugs in the tables created
2 virtual mono modes (#45 90x43 and #112 80x43) that behaved more
strangely than crashing.  90-column modes are tweaked 80-column ones
and also fail to work on newer VGAs.  #45 did crash (hang) on some
hardware.
2017-03-26 14:31:29 +00:00
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Oleksandr Tymoshenko
2685a39acf Provide way for framebuffer driver to request mmap(2) mapping type
On ARM if memattr is not overriden mmap(2) maps framebuffer
memory as WBWA which means part of changes to content in userland
end up in cache and appear on screen gradually as cache lines are
evicted. This change adds configurable memattr that hardware fb
implementation can set to get the memory mapping type it
requires:

- Add new flag FB_FLAG_MEMATTR that indicates that framebuffer
    driver overrides default memattr
- Add new field fb_memattr to struct fb_info to specify requested
    memattr

Reviewed by:	ray
Differential Revision:	https://reviews.freebsd.org/D8064
2016-10-01 17:43:02 +00:00
John Baldwin
ab59c4d9f1 Use MTX_SYSINIT for the VESA lock.
vesa_init_done isn't a reliable guard for the mutex init.  If
vesa_configure() doesn't find valid VESA info it will not set
vesa_init_done, but the lock will remain initialized.  Revert r303076
and use MTX_SYSINIT to deterministically init the lock.

Reviewed by:	royger
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D7290
2016-07-23 14:38:09 +00:00
Roger Pau Monné
c397b61ea5 vesa: fix panic on suspend
Fix the following panic seen when migrating a FreeBSD guest on Xen:

panic: mtx_lock() of destroyed mutex @ /usr/src/sys/dev/fb/vesa.c:541
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe001d2fa4f0
vpanic() at vpanic+0x182/frame 0xfffffe001d2fa570
kassert_panic() at kassert_panic+0x126/frame 0xfffffe001d2fa5e0
__mtx_lock_flags() at __mtx_lock_flags+0x15b/frame 0xfffffe001d2fa630
vesa_bios_save_restore() at vesa_bios_save_restore+0x78/frame 0xfffffe001d2fa680
vga_suspend() at vga_suspend+0xa3/frame 0xfffffe001d2fa6b0
isavga_suspend() at isavga_suspend+0x1d/frame 0xfffffe001d2fa6d0
bus_generic_suspend_child() at bus_generic_suspend_child+0x44/frame
[...]

This is caused because vga_sub_configure (which is called if the VGA adapter
is attached after VESA tried to initialize), points to vesa_configure, which
doesn't initialize the VESA mutex. In order to fix it, make sure
vga_sub_configure points to vesa_load, so that all the needed vesa
components are properly initialized.

Sponsored by:		Citrix Systems R&D
MFC after:		3 days
PR:			209203
Reviewed by:		dumbbell
Differential revision:	https://reviews.freebsd.org/D7196
2016-07-20 09:29:39 +00:00
Alexander Motin
0f85a96bbf Fix NULL-dereference panic if VESA reports zero modes.
MFC after:	1 week
2016-05-17 19:00:09 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
4ed3c0e713 sys: Make use of our rounddown() macro when sys/param.h is available.
No functional change.
2016-04-30 14:41:18 +00:00
Pedro F. Giffuni
057b4402bf sys/dev: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:03:15 +00:00
Pedro F. Giffuni
323b076e9c sys: use our nitems() macro when param.h is available.
This should cover all the remaining cases in the kernel.

Discussed in:	freebsd-current
2016-04-21 19:40:10 +00:00
Svatopluk Kraus
a1e1814d76 As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to
include it explicitly when <vm/pmap.h> is already included.

Reviewed by:	alc, kib
Differential Revision:	https://reviews.freebsd.org/D5373
2016-02-22 09:02:20 +00:00
Justin Hibbits
43cd61606b Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()
Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differential Revision: https://reviews.freebsd.org/D5306
2016-02-19 03:37:56 +00:00
Hans Petter Selasky
a985ae9b4a Add support for USB display link adapters to the FB and VT drivers.
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.

The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
2015-03-07 20:45:15 +00:00
Jean-Sébastien Pédron
76e2f97656 vt(4): Add support to "downgrade" from eg. vt_fb to vt_vga
The main purpose of this feature is to be able to unload a KMS driver.

When going back from the current vt(4) backend to the previous backend,
the previous backend is reinitialized with the special VDF_DOWNGRADE
flag set. Then the current driver is terminated with the new "vd_fini"
callback.

In the case of vt_fb and vt_vga, this allows the former to pass the
vgapci device vt_fb used to vt_vga so the device can be rePOSTed.

Differential Revision:	https://reviews.freebsd.org/D687
2015-03-01 12:54:22 +00:00
Hans Petter Selasky
b914a5291b Forward the FBIO_BLANK IOCTL to framebuffer clients. Bump the FreeBSD
version to force re-compilation of external video driver kernel
modules.

Discussed with:		ray @
2015-02-16 11:49:48 +00:00
Andriy Gapon
6dfa4578d6 vt(4): Use power_{suspend,resume} event handlers to implement
suspend/resume

The goal is to avoid that the vt(4) resume happens before the video
display is resumed. The original patch was provided by Andriy Gapon.

This new patch registers the handlers in vt_upgrade(). This is done
once, thanks to the VDF_ASYNC flag. I abused this flag because it was
already abused by the keyboard allocation. The event handlers then call
the backend if it provides callbacks for suspend/resume.

Differential Revision:	https://reviews.freebsd.org/D1004
On behalf of:	dumbbell
MFC after:	2 weeks
2015-01-27 15:28:46 +00:00
Jean-Sébastien Pédron
84d623c61e vt(4): Fix mouse cursor handling in vt_fb/creator_vt/ofwfb
There were two issues:
    1. The area given to vt_is_cursor_in_area() was adding the drawable
       area offset, something already handled by this function.
    2. The cursor was shifted on the screen by the offset of this area
       and thus was misplaced or not erased. Furthermore, when reaching
       the bottom or right borders, the cursor was either totally
       removed or not erased correctly.

MFC after:	1 week
2014-08-27 15:10:28 +00:00
Jean-Sébastien Pédron
83fbb296a9 vt(4): Store a rectangle for the drawable area, not just the top-left corner
This allows backends to verify they do not draw outside of this area.
This fixes a bug in vt_vga where the text was happily drawn over the
right and bottom margins, when using the Gallant font.

MFC after:	1 week
2014-08-25 19:06:31 +00:00
Jean-Sébastien Pédron
631bb572ba vt(4): Add vd_bitblt_bmp_t callback
The code was already there in all backends, we just expose it. This is
used to display the splash screen.

MFC after:	1 week
2014-08-23 20:35:33 +00:00
Jean-Sébastien Pédron
54927e051c creator_fb: Implement vd_bitblt_text_t
MFC after:	1 week
2014-08-23 15:04:20 +00:00
Jean-Sébastien Pédron
19e2ce2d83 vt(4): Colors are indexed against a console palette, not a VGA palette
Rename vt_generate_vga_palette() to vt_generate_cons_palette() and
change it to build a palette where the color index is the same than in
terminal escape codes, not the VGA index. That's what TCHAR_CREATE()
uses and passes to vt(4).

The main differences between both orders are:
    o  Blue and red are swapped (1 <-> 4)
    o  Yellow and cyan are swapped (3 <-> 6)

The problem remained unnoticed, because the RGB bit indexes passed to
vt_generate_vga_palette() were reversed. This inversion was cancelled
by the colors inversions in the generated palette. For instance, red
(0xff0000) and blue (0x0000ff) have bytes in opposite order, but were
swapped in the palette. But after changing the value of blue (see last
paragraph), the modified color was in fact the red one.

This commit includes a fix to creator_vt.c, submitted by Nathan
Whitehorn: fb_cmsize is set to 16. Before this, the generated palette
would be overwritte. This fixes colors on sparc64 with a Creator3D
adapter.

While here, tune the palette to better match console colors and improve
the readability (especially the dark blue).

Submitted by:	nwhitehorn (fix to creator_vt.c)
MFC after:	1 week
2014-08-10 17:04:10 +00:00
Jean-Sébastien Pédron
2cf9e30b6e fbd: Fix a bug where vt_fb_attach() success would be considered a failure
vt_fb_attach() currently always returns 0, but it could return a code
defined in errno.h. However, it doesn't return a CN_* code. So checking
its return value against CN_DEAD (which is 0) is incorrect, and in this
case, a success becomes a failure.

The consequence was unimportant, because the caller (drm_fb_helper.c)
would only log an error message in this case. The console would still
work.

Approved by:	nwhitehorn
2014-08-10 14:55:39 +00:00
Nathan Whitehorn
0f3ec4da2f Retire vd_maskbitbltchr. The same functionality can be obtained by testing
for mask != NULL in vd_bitbltchr, which all implementations of vd_bitbltchr()
were doing anyway.
2014-08-07 21:00:16 +00:00
Nathan Whitehorn
9ed297c83c Retire various intertwined bits of fbd(4) and vt_fb, in particular the
pixel modification indirection. No actual drivers use it and those that
might (e.g. creatorfb) use custom implementations of vd_bitbltchr().
2014-08-06 00:35:48 +00:00
Nathan Whitehorn
c529ffef57 Add a simple unaccelerated vt(4) framebuffer driver for Sun framebuffers
handled by creator(4) (Sun Creator 3D, Elite 3D, etc.). This provides
vt(4) consoles on all devices currently supported by syscons on sparc64.
The driver should also be easily adaptable to support newer Sun framebuffers
such as the XVR-500 and higher.

Many thanks to dumbbell@ (Jean-Sebastien Pedron) for testing this remotely
during development.
2014-08-05 18:19:51 +00:00
Nathan Whitehorn
60d7ea3d32 Allow console drivers active from early boot to be used with xf86-video-scfb,
rather than only drivers attached later on. This involves a small amount of
code duplication with dev/fb/fbd.c, which will fixed later on.

Also improve performance of vt_blank() by making it not read from the
framebuffer unnecessarily.
2014-07-16 18:49:46 +00:00
Aleksandr Rybalko
79b647995d Should check fb_read method presence instead of double check for fb_write.
Pointed by:     emaste

Sponsored by:	The FreeBSD Foundation
2014-07-09 21:55:34 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Dimitry Andric
2994da7d3c Remove more superfluous const specifiers. 2014-02-23 18:36:45 +00:00
Ed Maste
e279f478f2 Clean up license text
- Renumber Regents clauses
- Remove clause 3 and 4 from TNF license, following upstream change
2013-12-29 18:44:12 +00:00
Aleksandr Rybalko
7a1a32c4ef o Add virtual terminal mmap request handler.
o Forward termianl framebuffer ioctl to fbd.
o Forward terminal mmap request to fbd.
o Move inclusion of sys/conf.h to vt.h.

Sponsored by:	The FreeBSD Foundation
2013-12-23 18:09:10 +00:00
Aleksandr Rybalko
27cf7d04ef Merge VT(9) project (a.k.a. newcons).
Reviewed by:	nwhitehorn
MFC_to_10_after:	re approval

Sponsored by:	The FreeBSD Foundation
2013-12-05 22:38:53 +00:00