Commit Graph

83 Commits

Author SHA1 Message Date
Kazutaka YOKOTA
db3e34cb71 - Properly keep track of I/O port resources.
- Use bus_space_read/write() to access the ports.
2000-03-19 03:25:13 +00:00
Kazutaka YOKOTA
3346e881c1 - Add Support for the following PS/2 mice:
- Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons
    and a wheel which also acts as the middle button.  The mouse is
    recognized as "IntelliMouse Explorer".
  - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a
    wheel which also acts as the middle button.  The mouse is recognized
    as "NetMouse/NetScroll Optical".
  - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top,
    1 side button and a wheel.  The mouse is recognized as Genius
    "NetScroll".
  - IBM ScrollPoint: 2 buttons on top and a stick between the buttons.
    The stick can perform "horizontal scroll" in W*ndows environment.
    The horizontal movement of the stick is detected.  It is currently
    mapped to the Z axis movement in the same way as the first wheel.
    The mouse is recognized as "MouseMan+", as it is considered to be
    a variation of MouseMan.
  - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement
    of the second wheel is reported as the Z axis movement in the
    same way as the first wheel. These mice are recognized as "4D
    Mouse" and "4D+ Mouse".
  - Tweak IntelliMouse support code a bit so that less-than-compatible
    wheel mice can work properly with the psm driver.
- Add driver configuration flags which correspond to the kernel
  options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't
  need to recompile the kernel when we need these functions.
- Properly keep track of the irq resource.
- Add a watchdog timer in case interrupts are lost (experimental).
- Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Yoshihiro Takahashi
49c57093b7 Changed key assign for PC-98.
shift+TAB  : BackTab
HELP       : End
STOP       : ScrollLock
shift+STOP : ScreenSaver
GRPH +STOP : Suspend(susp)
COPY       : NextScreen(nscr)
ctrl +COPY : Debug
NFER       : Meta

Submitted by:   chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-16 12:10:43 +00:00
Kazutaka YOKOTA
a68d00e3fe One more patch for the atkbd driver. It will make sure that the
keyboard port and interrupt is enabled and the driver is attached even
when the keyboard itself is not present when the system is booting.
(This has been the behavior through out 2.X and 3.X, but is somehow
broken in 4.0.)

# I certainly don't recommend people to `hot-plug' the AT keyboard,
# because the interface isn't designed for hot-plugging and such act
# will often break the keyboard controller.  But, so many people want to
# do that anyway...

Approved by: jkh
2000-03-11 07:44:10 +00:00
Kazutaka YOKOTA
aec1fa1ca3 - Be slightly more cautious and try to make more sure the keyboard
input queue is emptied when initializing the keyboard controller.
- Remove an unnecessary `if' statement.

Approved by: jkh
2000-02-11 01:22:30 +00:00
Peter Wemm
8f8e587948 Use config's conditional compilation rather than using #ifdefs that make
modular compilation harder.  I'm doing this because people seem to like
cut/pasting examples of bad practices in existing code.
2000-01-29 15:08:56 +00:00
Kazutaka YOKOTA
7c6f57a384 - Add some comment from bde on the keyboard interrupt.
- Fix obsolete comments.
2000-01-20 13:32:53 +00:00
Kazutaka YOKOTA
7642cc829e Rework shifta/ctla/alta key handling. It appears that there was
misunderstanding between the PR originator and me.  I hope I got it
right this time.
2000-01-11 13:39:05 +00:00
Kazutaka YOKOTA
56f5e27c4b Obtain the initial key repeat rate setting via BIOS in i386 if
possible.
2000-01-10 08:52:32 +00:00
Kazutaka YOKOTA
934d11e395 Add some keyboard IDs. 2000-01-10 08:50:43 +00:00
Yoshihiro Takahashi
b3ef0af491 - Fixed warnings.
- Removed unnecessary include files.
2000-01-04 04:46:50 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Kazutaka YOKOTA
7a4803c7f6 - Add a module event function to the ukbd driver and make the ukbd KLD
module work.
- Delete unnecessary #include.
1999-12-13 10:36:36 +00:00
Kazutaka YOKOTA
579958932a - Remember the keyboard repeat delay and rate.
- Add a new ioctl, KDGETREPEAT, to retrieve the keyboard repeat rate.
- Delete unnecessary #include.
1999-12-13 09:31:43 +00:00
Kazutaka YOKOTA
82d654e855 Add support new keys: lshifta, rshifta, lctrla, rctrla, lalta, and
ralta.  These keys combine shift/ctrl/alt function and the AltLock
function.  When these keys pressed together with another key, they act
just like the ordinary shift/ctrl/alt keys.  When these keys are
pressed and released alone, Alt lock state is toggled.

PR: kern/12475
1999-12-10 04:31:33 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Kazutaka YOKOTA
6c6028fffb Correctly save `flags' bits. 1999-08-15 06:06:14 +00:00
Kazutaka YOKOTA
29e59d7deb - Move the `return' statement the correct place so that the keyboard
won't be initialized if `atkbd?' is disabled.
1999-07-18 06:16:25 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Poul-Henning Kamp
7a1c7bc99f Don't bogusly define a d_reset_t function. 1999-05-30 14:55:24 +00:00
Kazutaka YOKOTA
d3c87b8512 - Include isa/isareg.h rather than i386/isa/isa.h for i386.
- Remove unused (thus, commented out) section of code.
1999-05-20 09:49:33 +00:00
Kazutaka YOKOTA
aee1b285f1 Include sys/isa/isareg.h rather than i386/isa/isa.h for i386. 1999-05-20 09:48:13 +00:00
Kazutaka YOKOTA
ec6948ccea Slight reorganization of internal interface in the keyboard controller
driver.
1999-05-18 11:33:14 +00:00
Kazutaka YOKOTA
76fa85c503 Silence warnings. 1999-05-18 11:08:39 +00:00
Kazutaka YOKOTA
8fbe57ce4b Remove unnecessary function call. 1999-05-18 11:07:12 +00:00
Kazutaka YOKOTA
83fc7c6ced The previous commit was wrong! This is the correct one ;-< 1999-05-18 11:05:58 +00:00
Kazutaka YOKOTA
194da42d48 Don't confuse cursor keys with numpad keys when composing a char code.
PR: kern/10988
1999-05-09 05:00:19 +00:00
Kazutaka YOKOTA
57600c2385 Minor tweak after the introduction of new-bus to i386; properly
check "disabled" and "flags" probe hints.
1999-05-09 04:59:24 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Kazutaka YOKOTA
ffba82a9ae - Fixed the bug which always ignored Ctrl-Pause/Break on the AT 101
keyboard.
- Translate some keycode for the 84 keyboard so that the 84 keyboard
  and the 101 keyboard become more compatible in terms of keycodes.
- Updated the built-in keymaps so that it is in line with the recent
  changes in share/syscons/keymaps.
- Added some comment on the Pause/Break key on the 101 keyboard.
1999-01-28 10:55:55 +00:00
Matthew Dillon
0a5e03dda5 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-28 01:59:53 +00:00
Kazutaka YOKOTA
f359876ff1 syscons
- Bring down the splash screen when a vty is opened for the first
  time.
- Make sure the splash screen/screen saver is stopped before
  switching vtys.
- Read and save initial values in the BIOS data area early.
  VESA BIOS may change BIOS data values when switching modes.
- Fix missing '&' operator.
- Move ISA specific part of driver initialization to syscons_isa.c.

atkbd
- kbdtables.h is now in /sys/dev/kbd.

all
- Adjust for forthcoming alpha port.  Submitted by: dfr
1999-01-19 11:31:22 +00:00
Kazutaka YOKOTA
00f19754a4 Use the correct macro to test flags; we need KBD_IS_INITIALIZED here,
not KBD_IS_PROBED.
1999-01-13 11:19:19 +00:00
Kazutaka YOKOTA
fc8be383ec Fix PIO_KEYMAPENT/GIO_KEYMAPENT. They used to copy from/to a wrong place.
The bug found by: Mike Zanker <A.M.Zanker@open.ac.uk>
1999-01-12 12:23:00 +00:00
Kazutaka YOKOTA
90500a9d1a Clean up warnings: get conditional compilation right so that a local
function won't be defined unless it is actually used.
Requested by: eivind
1999-01-12 10:35:58 +00:00
Kazutaka YOKOTA
617b908036 Add the new keyboard driver and video card driver. They will be
used by console drivers.

(They are not yet activated yet.  Wait for announcement later.)
1999-01-09 02:44:50 +00:00
KATO Takenori
8ea9416c8c Fix ROOL UP/DOWN keys of PC-98. 1998-11-18 08:33:58 +00:00
Søren Schmidt
a8445737e7 Add VESA support to syscons.
Kazu writes:

The VESA support code requires vm86 support. Make sure your kernel
configuration file has the following line.
        options "VM86"
If you want to statically link the VESA support code to the kernel,
add the following option to the kernel configuration file.
        options "VESA"

The vidcontrol command now accepts the following video mode names:
VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600

The VESA_800x600 mode is a raster display mode. The 80x25 text will
be displayed on the 800x600 screen. Useful for some laptop computers.

vidcontrol accepts the new `-i <info>' option, where <info> must be
either `adapter' or `mode'.  When the `-i adapter' option is given,
vidcontrol will print basic information (not much) on the video
adapter. When the `-i mode' option is specified, vidcontrol will
list video modes which are actually supported by the video adapter.

Submitted by:   Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
Steve Price
810e1311d2 keymap -> key_map so that the kernel will compile with
-DESKEYMAP.

PR:		6864
Submitted by:	Javier Rueda <jmrueda@diatel.upm.es>
1998-06-06 17:45:11 +00:00
Kazutaka YOKOTA
ef65ade83a Define CTL-ALT-ESC as the debug' key, CTL-ALT-SPACE as the suspend'key
in all built-in keymaps.
1998-01-28 08:45:18 +00:00
Kazutaka YOKOTA
4d76195ef5 Fix illegal numeric expressions: 08 and 09. 1998-01-12 23:54:51 +00:00
Kazutaka YOKOTA
a3bd3dac25 Added accent (dead) key support to syscons and kbdcontrol.
With a keymap with accent key definitions loaded to syscons, you press
an accent key followed by a regular letter key to produce an accented
letter.  Press an accent key followed by the space bar to get the
accent letter itself.

Code is based on the ideas and work by jmrueda@diatel.upm.es and
totii@est.is.

PR: i386/4016

console.h
- Defined structures and constants for accent (dead) keys.

syscons.c, kbdtables.h
- When an accent key is pressed, set the corresponding index to
  `accents'.  If the next key is the space key, produce the accent char
  itself.  Otherwise search the accent key map entry, indexed by
  `accents', for a matching pair of a regular char and an accented char.
- Added ioctl functions to set and get the accent key map (PIO_DEADKEYMAP
  and GIO_DEADKEYMAP).
1998-01-07 08:40:34 +00:00
Jordan K. Hubbard
43990fb0dc Back out my LALT -> META change until we figure out a way to make it
work sympathetically with the function keys.
1997-10-12 19:57:49 +00:00
Jordan K. Hubbard
116851ffa3 Change default keymap (I left all the international ones alone) so
that LALT is META by default.  This will make the emacs users happy.
Approved by: sos
1997-10-10 10:32:53 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00