Sorting order should be done by manpage section (2 vs 3), then alphabetically.
This change fixes the order to sort by the manpage section, first.
Reported by: make manlint
MFC after: 1 week
Sponsored by: DellEMC Isilon
- pthreads(3) should actually be pthread(3).
- getentropy(2) should actually be getentropy(3).
This makes the manpage `make manlint` clean.
MFC after: 1 week
Sponsored by: DellEMC Isilon
These values are taken directly from the density report from an
IBM LTO-9 tape drive. (Using mt getdensity)
A LTO-9 drive stores 18TB raw (45TB with compression) on an LTO-9 tape.
lib/libmt/mtlib.c:
Add the LTO-9 density code, and bpmm/bpi values.
usr.bin/mt/mt.1:
Add the LTO-9 density code, bpmm/bpi values and number of
tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
Assume that UMTX_OP with a double underbar following is a flag, while any
underbar+alphanumeric combination immeiately following is an op.
This was a part of D27325.
Reviewed by: kib
This is being done for the formatting and context changes. While the net content
hasn't been changed, the content/context changes were sufficient to warrant the
date bump.
MFC after: 1 week
MFC with: r368431, r368433, r368434, r368435
Sponsored by: DellEMC Isilon
While some of the syscalls' behavior were documented and implied in the
RETURN VALUES section by earlier, e.g., the DESCRIPTION sections, as having
behavior of the other calls (`*_fd` vs `*_file` vs `*_link`), there was a lot
of implied return value behavior in the section prior to this change.
Explicitly document the syscall behavior per the current implementation in
sys/kern/vfs_extattr.c so others can better develop based on its explicit
documented behavior instead of having to digest the context of the manpage to
understand the appropriate behavior.
MFC after: 1 week
MFC with: r368431, r368433, r368434
Sponsored by: DellEMC Isilon
- Remove an unnecessary trailing comma separating a two-item clause.
- Sort more function calls alphabetically (in the same vein as r368433).
MFC after: 1 week
Sponsored by: DellEMC Isilon
Although some sections of the manpage sort the syscalls alphabetically, many
core areas of the manpage do not. Sort the syscalls so it is easier to pick out
functional changes and to improve manpage readability.
This formatting change is also being done to make future functional changes
easier to spot.
MFC after: 1 week
Sponsored by: DellEMC Isilon
The date with .Dd prior to this change isn't canonically spelled out: it
should have been "December", not "Dec".
MFC after: 1 week
Sponsored by: DellEMC Isilon
- The CAVEATS section was misspelled as "CAVEAT".
- The CAVEATS section should come before the "BUGS" section and after
other existing sections by convention.
MFC after: 1 week
Reported by: make manlint
Sponsored by: DellEMC Isilon
It was realized just a little too late that this was a hack that belonged in
individual regex(3)-using applications. It was surrounded in NOTYET and not
implemented in the engine, so remove it.
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
These are GNU extensions, generally equivalent to ^ and $ except that the
new syntax will not match beginning of line after the first in a multi-line
expression or the end of line before absolute last in a multi-line
expression.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
As of r365978, minidumps include a copy of dump_avail[]. This is an
array of vm_paddr_t ranges. libkvm walks the array assuming that
sizeof(vm_paddr_t) is equal to the platform "word size", but that's not
correct on some platforms. For instance, i386 uses a 64-bit vm_paddr_t.
Fix the problem by always dumping 64-bit addresses. On platforms where
vm_paddr_t is 32 bits wide, namely arm and mips (sometimes), translate
dump_avail[] to an array of uint64_t ranges. With this change, libkvm
no longer needs to maintain a notion of the target word size, so get rid
of it.
This is a no-op on platforms where sizeof(vm_paddr_t) == 8.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27082
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
We need at least thr_malloc ready. The situation is possible e.g. in case
of libthr being listed in DT_NEEDED before some of its consumers.
Reported and tested by: lev
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This seems to be required by recent clang asan.
I do not see other way than put the symbol under FBSD_1.0 version.
PR: 251112
Reported by: Andrew Stitcher <astitcher@apache.org>
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27389
r352913 added decoding of mmap PROT_MAX()'d flags but didn’t account for the
case where different values were specified for PROT_MAX and regular flags.
Fix it.
Submitted by: sigsys_gmail.com
Reported by: sigsys_gmail.com
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D27312
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
Add a new ioctl to disable all MSI-X interrupts for a PCI passthrough
device and invoke it if a write to the MSI-X capability registers
disables MSI-X. This avoids leaving MSI-X interrupts enabled on the
host if a guest device driver has disabled them (e.g. as part of
detaching a guest device driver).
This was found by Chelsio QA when testing that a Linux guest could
switch from MSI-X to MSI interrupts when using the cxgb4vf driver.
While here, explicitly fail requests to enable MSI on a passthrough
device if MSI-X is enabled and vice versa.
Reported by: Sony Arpita Das @ Chelsio
Reviewed by: grehan, markj
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27212
unsigned char promotes to int, which can overflow when shifted left by
24 bits or more. this has been reported multiple times but then
forgotten. it's expected to be benign UB, but can trap when built with
explicit overflow catching (ubsan or similar). fix it now.
note that promotion to uint32_t is safe and portable even outside of
the assumptions usually made in musl, since either uint32_t has rank
at least unsigned int, so that no further default promotions happen,
or int is wide enough that the shift can't overflow. this is a
desirable property to have in case someone wants to reuse the code
elsewhere.
musl commit: 593caa456309714402ca4cb77c3770f4c24da9da
Obtained from: musl
first, the condition (mem && k < p) is redundant, because mem being
nonzero implies the needle is periodic with period exactly p, in which
case any byte that appears in the needle must appear in the last p
bytes of the needle, bounding the shift (k) by p.
second, the whole point of replacing the shift k by mem (=l-p) is to
prevent shifting by less than mem when discarding the memory on shift,
in which case linear time could not be guaranteed. but as written, the
check also replaced shifts greater than mem by mem, reducing the
benefit of the shift. there is no possible benefit to this reduction of
the shift; since mem is being cleared, the full shift is valid and
more optimal. so only replace the shift by mem when it would be less
than mem.
musl commits:
8f5a820d147da36bcdbddd201b35d293699dacd8
122d67f846cb0be2c9e1c3880db9eb9545bbe38c
Obtained from: musl
MFC after: 2 weeks
We have adopted these and don't consider them 'contrib' code, so bring
them closer to style(9). This is a followon to r315467 and r351700.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This function returns the path to the local software base directory, by
default "/usr/local" (or the value of _PATH_LOCALBASE in include/paths.h
when building the world).
The value returned can be overridden by 2 methods:
- the LOCALBASE environment variable (ignored by SUID programs)
- else a non-default user.localbase sysctl value
Reviewed by: hps (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27236
Some platforms have additional architecture-specific floating-point flags.
Msun test cases lrint and test_fegsetenv (fenv) expects only standard flags,
so make sure to mask them appropriately.
This makes test pass on PowerPC64.
Reviewed by: jhibbits, ngie
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27202
No functional change intended.
Tracking these structures separately for each proc enables future work to
correctly emulate clone(2) in linux(4).
__FreeBSD_version is bumped (to 1300130) for consumption by, e.g., lsof.
Reviewed by: kib
Discussed with: markj, mjg
Differential Revision: https://reviews.freebsd.org/D27037
Fix incorrect mask being used when FE_INVALID bit is wanted by user.
The problem was noticed thanks to msun fenv tests.
Reviewed by: jhibbits, luporl
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27201
Specifically, if we're waking up some value n > BATCH_SIZE, then the
copyin(9) is wrong on the second iteration due to upp being the wrong type.
upp is currently a uint32_t**, so upp + pos advances it by twice as many
elements as it should (host pointer size vs. compat32 pointer size).
Fix it by just making upp a uint32_t*; it's still technically a double
pointer, but the distinction doesn't matter all that much here since we're
just doing arithmetic on it.
Add a test case that demonstrates the problem, placed with the libthr tests
since one messing with _umtx_op should be running these tests. Running under
compat32, the new test case will hang as threads after the first 128 get
missed in the wake. it's not immediately clear how to hit it in practice,
since pthread_cond_broadcast() uses a smaller (sleepq batch?) size observed
to be around ~50 -- I did not spend much time digging into it.
The uintptr_t change makes no functional difference, but i've tossed it in
since it's more accurate (semantically).
Reported by: Andrew Gierth (andrew_tao173.riddles.org.uk, inspection)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27231
This clever technique to get a time remaining back was added to support sem_clockwait_np.
Reviewed by: kib, vangyzen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27160
unify the retrieval of the various ways that the local software base directory,
typically "/usr/local", is expressed in the system.
Reviewed by: se
Differential Revision: https://reviews.freebsd.org/D27022
This was missed in r364221 so tests were not built.
Reviewed by: bdrewery
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27210
libarchive depends on it by default and tar uses libarchive.
So on a update :
1/ runtime contain tar
2/ runtime have libarchive in shlibs_required
3/ libarchive packages depends on utilities
4/ utilities depends on runtime
5/ kaboom
All users of libprivatezstd (libarchive related stuff and objcopy/ar)
are already in utilities.
Discussed with: bapt
- Force dynamic to be a non-PIE binary.
- Add a dynamicpie test which uses a PIE binary.
Reviewed by: andrew
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27127
PIE executables use crtbeginS.o and have a non-NULL dso_handle as a
result.
Reviewed by: andrew, emaste
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27126
This is more consistent with the names used for .ctor and .dtor
symbols and better reflects __JCR_END__'s role.
Reviewed by: andrew
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27125
