into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
block copy, when copying the superblock into the snapshot. UFS1 does
not align superblock on the block boundary, and bcopy runs off the end
of the buffer.
Reported by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vfs_busy(mp);
vfs_write_suspend(mp);
which are problematic if other thread starts unmount between two
calls. The unmount starts a write, while vfs_write_suspend() drain
writers. On the other hand, unmount drains busy references, causing
the deadlock.
Add a flag argument to vfs_write_suspend and require the callers of it
to specify VS_SKIP_UNMOUNT flag, when the call is performed not in the
mount path, i.e. the covered vnode is not locked. The suspension is
not attempted if VS_SKIP_UNMOUNT is specified and unmount is in
progress.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
mount, which means that is must not be called while the snaplock is
owned. The vfs_write_resume(9) does call the function as the
VFS_SUSP_CLEAN() method, which is too early and falls into the region
still protected by snaplock.
Add yet another flag for the vfs_write_resume_flags() to avoid calling
suspension cleanup handler after the suspend is lifted, and use it in
the ffs_snapshot() call to vfs_write_resume.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the write start, by adding a variation of the vfs_write_resume(9)
which accepts flags.
Use the new function to prevent a deadlock between parallel suspension
and snapshotting a UFS mount. The ffs_snapshot() code performed
vfs_write_resume() followed by vn_start_write() while owning the
snaplock. If the suspension intervene between resume and
vn_start_write(), the deadlock occured after the suspending thread
tried to lock the snaplock, most typically during the write in the
ffs_copyonwrite().
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: mckusick
MFC after: 2 weeks
X-MFC-note: make the vfs_write_resume(9) function a macro after the MFC,
in HEAD
The primary changes are that the user of the interface no longer
needs to manage the mount-mutex locking and that the vnode that
is returned has its mutex locked (thus avoiding the need to check
to see if its is DOOMED or other possible end of life senarios).
To minimize compatibility issues for third-party developers, the
old MNT_VNODE_FOREACH interface will remain available so that this
change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH
will be removed in head.
The reason for this update is to prepare for the addition of the
MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the
active vnodes associated with a mount point (typically less than
1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
static and declare its prototype in sys/vnode.h) so that it can be
called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c)
instead of the body of vinactive() being cut and pasted into
process_deferred_inactive().
Reviewed by: kib
MFC after: 2 weeks
snapshots on UFS filesystems running with journaled soft updates.
This is the first of several bugs that need to be fixed before
removing the restriction added in -r230250 to prevent the use
of snapshots on filesystems running with journaled soft updates.
The deadlock occurs when holding the snapshot lock (snaplk)
and then trying to flush an inode via ffs_update(). We become
blocked by another process trying to flush a different inode
contained in the same inode block that we need. It holds the
inode block for which we are waiting locked. When it tries to
write the inode block, it gets blocked waiting for the our
snaplk when it calls ffs_copyonwrite() to see if the inode
block needs to be copied in our snapshot.
The most obvious place that this deadlock arises is in the
ffs_copyonwrite() routine when it updates critical metadata
in a snapshot and tries to write it out before proceeding.
The fix here is to write the data and indirect block pointer
for the snapshot, but to skip the call to ffs_update() to
write the snapshot inode. To ensure that we will never have
to update a pointer in the inode itself, the ffs_snapshot()
routine that creates the snapshot has to ensure that all the
direct blocks are allocated as part of the creation of the
snapshot.
A less obvious place that this deadlock occurs is when we hold
the snaplk because we are deleting a snapshot. In the course of
doing the deletion, we need to allocate various soft update
dependency structures and allocate some journal space. If we
hit a resource limit while doing this we decrease the resources
in use by flushing out an existing dirty file to get it to give
up the soft dependency resources that it holds. The flush can
cause an ffs_update() to be done on the inode for the file that
we have selected to flush resulting in the same deadlock as
described above when the inode that we have chosen to flush
resides in the same inode block as the snapshot inode that we hold.
The fix is to defer cleaning up any time that the inode on which
we are operating is a snapshot.
Help and review by: Jeff Roberson
Tested by: Peter Holm
MFC (to 9 only) after: 2 weeks
filesystem running with journaled soft updates. Until these problems
have been tracked down, return ENOTSUPP when an attempt is made to
take a snapshot on a filesystem running with journaled soft updates.
MFC after: 2 weeks
whle tracking down the system hang reported in kern/160662 and
corrected in revision 225806. The LOR is not the cause of the system
hang and indeed cannot cause an actual deadlock. However, it can
be easily eliminated by defering the acquisition of a buflock until
after all the vnode locks have been acquired.
Reported by: Hans Ottevanger
PR: kern/160662
SU+J is not included as a FEATURE macro:
- it was not in the tree during the GSoC
- I do not see an option to en-/disable it in NOTES
Two minor changes where made during the review compared to what was developed
during GSoC 2010.
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: kib
X-MFC after: to be determined in last commit with code from this project
snapshot code.
- Don't fsync() vnodes in prealloc if copy on write is in progress. It
is not safe to recurse back into the write path here.
Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
brings in support for an optional intent log which eliminates the need
for background fsck on unclean shutdown.
Sponsored by: iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
the removal of NQNFS, but was left in in case it was required for NFSv4.
Since our new NFSv4 client and server can't use it for their
requirements, GC the old mechanism, as well as other unused lease-
related code and interfaces.
Due to its impact on kernel programming and binary interfaces, this
change should not be MFC'd.
Proposed by: jeff
Reviewed by: jeff
Discussed with: rmacklem, zach loafman @ isilon
address space sizes to be longs instead of ints. Specifically, the follow
values are now longs: runningbufspace, bufspace, maxbufspace,
bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace,
hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a
relatively small number (~ 44000) of buffers set in kern.nbuf would result
in integer overflows resulting either in hangs or bogus values of
hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see
such problems. There was a check for a nbuf setting that would cause
overflows in the auto-tuning of nbuf. I've changed it to always check and
cap nbuf but warn if a user-supplied tunable would cause overflow.
Note that this changes the ABI of several sysctls that are used by things
like top(1), etc., so any MFC would probably require a some gross shims
to allow for that.
MFC after: 1 month
up space. If the buffer cache fills up then the disk systems can
grind to a halt. Better tuning can be figured out later.
Tested by: Tim, others and work
Reviewed by: Kostik Belousov
PR: 128832
wait until the current suspension is lifted instead of silently returning
success immediately. The consequences of calling vfs_write() resume when
not owning the suspension are not well-defined at best.
Add the vfs_susp_clean() mount method to be called from
vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and
stop calling it manually.
Add the thread flag TDP_IGNSUSP that allows to bypass the suspension
point in the vn_start_write. It is intended for use by VFS in the
situations where the suspender want to do some i/o requiring calls to
vn_start_write(), and this i/o cannot be done later.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
Keeping the lockmgr lock valid allows us to switch the v_lock pointer
in snapshot vnodes between the embedded lockmgr lock and snapdata
lock without needing the vnode interlock to protect against races
- Keep unused snapdata structures in a list.
- Add a function to lock the devvp and allocate a snapdata to it or
acquire a new one without races. The old function was safe from
creation races because we set the mount flag when creating snapshots
and thus serializing them. However, it might have been subject to
destroying races.
Reviewed by: tegge
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
file are after snaplock, while other ffs device buffers are before
snaplock in global lock order. By itself, this could cause deadlock
when bdwrite() tries to flush dirty buffers on snapshotted ffs. If,
during the flush, COW activity for snapshot needs to allocate block
and ffs_alloccg() selects the cylinder group that is being written
by bdwrite(), then kernel would panic due to recursive buffer lock
acquision.
Avoid dealing with buffers in bdwrite() that are from other side of
snaplock divisor in the lock order then the buffer being written. Add
new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in
the bdwrite(). Default implementation, bufbdflush(), refactors the code
from bdwrite(). For ffs device buffers, specialized implementation is
used.
Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes)
Tested by: Peter Holm
X-MFC after: 3 weeks (if ever: it changes ABI)
1) Do not do quota accounting for the actual quota data files
or for file system snapshot files ("system" files). This
prevents a deadlock descibed in PR kern/30958 if the kernel
ever has to grow the quota file. Snapshot files were already
exempt from the quota checks, but this change generalized the check.
2) Fix a cast that caused extremely large uids/gids to incorrectly
write the quota information to the data file at a truncated
value for a uint_t32 id value. The incorrect cast caused quota
files in this case to be around 4GB in size, with the correct cast
they can now be 131GB in size. Also related to PR kern/30958.
3) Check for what appear to be negative UIDs/GIDs and not account
for them. This prevents the quota files from becoming 131GB in
size and causing quotacheck to run forever at bootup. This could
also cause the kernel to try and expand the quota file, which might
deadlock due to the issue in #1. kern/30958 and kern/38156
(and some much older closed PR's).
4) With the deadlock problems gone, the kernel can now expand the
size of the quota database files if it needs to.
5) Pass in the i-node count change value to chkiq and chkiqchg as an
int, like it used to be before the common routine was split up
into 2 different routines to increase / decrease the i-node in-use
count. Prevents an underflow on the i-node count. Related
to PR kern/89247.
6) Prevent the block usage from growing slowly if a file system is
full and the write was denied due to that fact. PR kern/89247.
Some of these changes require an updated quotacheck to prevent
the creation of huge (131GB) quota data files (item #3).
#1/#4 probably fixes a lot of the random hangs when quotas are enabled,
possibly some of the jail hangs.
is suspending/suspended. Doing so may result in deadlock. Instead, set the
(new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted.
Change the locking protocol in order to set the IN_ACCESS and timestamps
without upgrading shared vnode lock to exclusive (see comments in the
inode.h). Before that, inode was modified while holding only shared
lock.
Tested by: Peter Holm
Reviewed by: tegge, bde
Approved by: pjd (mentor)
MFC after: 3 weeks
first filter out metadata update. Otherwise, devfs vnode could be
erronously interpreted as ufs one, causing further check of i_flags
to use random memory.
PR: kern/100365
Debugged and fix described by: tegge
Approved by: pjd (mentor)
MFC after: 2 weeks
