Commit Graph

148 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Ed Maste
cd03a7b7ce libmd: add noexec stack annotation in skein_block_asm.s
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2017-01-07 19:26:25 +00:00
Andrew Turner
d6699d292b Add accelerated AES with using the ARMv8 crypto instructions. This is based
on the AES-NI code, and modified as needed for use on ARMv8. When loaded
the driver will check the appropriate field in the id_aa64isar0_el1
register to see if AES is supported, and if so the probe function will
signal the driver should attach.

With this I have seen up to 2000Mb/s from the cryptotest test with a single
thread on a ThunderX Pass 2.0.

Reviewed by:	imp
Obtained from:	ABT Systems Ltd
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D8297
2016-11-21 11:18:00 +00:00
Alan Somers
8254c3c5d3 Fix C++ includability of crypto headers with static array sizes
C99 allows array function parameters to use the static keyword for their
sizes. This tells the compiler that the parameter will have at least the
specified size, and calling code will fail to compile if that guarantee is
not met. However, this syntax is not legal in C++.

This commit reverts r300824, which worked around the problem for
sys/sys/md5.h only, and introduces a new macro: min_size(). min_size(x) can
be used in headers as a static array size, but will still compile in C++
mode.

Reviewed by:	cem, ed
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D8277
2016-10-18 23:20:49 +00:00
Ed Maste
de13c2427d libmd: introduce functions that operate on an fd instead of filename
Reviewed by:	allanjude, cem
MFC after:	2 months
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D8264
2016-10-17 13:47:22 +00:00
Allan Jude
2b53c51767 Fix typo in skein amd64 assembly
Sponsored by:	ScaleEngine Inc.
2016-09-08 02:38:55 +00:00
Allan Jude
0144ad3e78 Connect the SHA-512t256 and Skein hashing algorithms to ZFS
Support for the new hashing algorithms in ZFS was introduced in r289422
However it was disconnected because FreeBSD lacked implementations of
SHA-512 (truncated to 256 bits), and Skein.

These implementations were introduced in r300921 and r300966 respectively

This commit connects them to ZFS and enabled these new checksum algorithms

This new algorithms are not supported by the boot blocks, so do not use them
on your root dataset if you boot from ZFS.

Relnotes:	yes
Sponsored by:	ScaleEngine Inc.
2016-05-31 04:12:14 +00:00
Colin Percival
696c3895ae Retune SHA2 code for improved performance on CPUs with more ILP and
a preference for memory load instructions over large code footprints
with embedded immediate variables.

On amd64 CPUs from 2007-2008 there is not a significant change, but
amd64 CPUs from 2009-2010 get roughly 10% more throughput with this
code; amd64 CPUs from 2011-2012 get roughly 15% more throughput; and
AMD64 CPUs from 2013-2015 get 20-25% more throughput.  The Raspberry
Pi 2 increases its throughput by 6-8%.

Sponsored by:	Tarsnap Backup Inc.
Performance tested by:	allanjude
MFC after:	3 weeks
2016-05-29 17:26:40 +00:00
Allan Jude
b468a9ff1d Import the skein hashing algorithm, based on the threefish block cipher
Connect it to userland (libmd, libcrypt, sbin/md5) and kernel (crypto.ko)

Support for skein as a ZFS checksum algorithm was introduced in r289422
but is disconnected because FreeBSD lacked a Skein implementation.

A further commit will enable it in ZFS.

Reviewed by:	cem
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D6166
2016-05-29 01:15:36 +00:00
Allan Jude
1780e40715 Implement SHA-512 truncated (224 and 256 bits)
This implements SHA-512/256, which generates a 256 bit hash by
calculating the SHA-512 then truncating the result. A different initial
value is used, making the result different from the first 256 bits of
the SHA-512 of the same input. SHA-512 is ~50% faster than SHA-256 on
64bit platforms, so the result is a faster 256 bit hash.

The main goal of this implementation is to enable support for this
faster hashing algorithm in ZFS. The feature was introduced into ZFS
in r289422, but is disconnected because SHA-512/256 support was missing.
A further commit will enable it in ZFS.

This is the follow on to r292782

Reviewed by:	cem
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D6061
2016-05-28 16:06:07 +00:00
Conrad Meyer
571ebf7685 crypto routines: Hint minimum buffer sizes to the compiler
Use the C99 'static' keyword to hint to the compiler IVs and output digest
sizes.  The keyword informs the compiler of the minimum valid size for a given
array.  Obviously not every pointer can be validated (i.e., the compiler can
produce false negative but not false positive reports).

No functional change.  No ABI change.

Sponsored by:	EMC / Isilon Storage Division
2016-05-26 19:29:29 +00:00
Conrad Meyer
c564824193 aesni(4): Initialize error before use
Reported by:	Coverity
CID:		1331554
Sponsored by:	EMC / Isilon Storage Division
2016-04-20 03:05:32 +00:00
Allan Jude
2155bb238f Break up opencrypto/xform.c so it can be reused piecemeal
Keep xform.c as a meta-file including the broken out bits
existing code that includes xform.c continues to work as normal

Individual algorithms can now be reused elsewhere, including outside
of the kernel

Reviewed by:	bapt (previous version), gnn, delphij
Approved by:	secteam
MFC after:	1 week
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D4674
2015-12-30 22:43:07 +00:00
Allan Jude
7a3f5d11fb Replace sys/crypto/sha2/sha2.c with lib/libmd/sha512c.c
cperciva's libmd implementation is 5-30% faster

The same was done for SHA256 previously in r263218

cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation

Extend sbin/md5 to create sha384(1)

Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}

Reviewed by:	cperciva, des, delphij
Approved by:	secteam, bapt (mentor)
MFC after:	2 weeks
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D3929
2015-12-27 17:33:59 +00:00
John-Mark Gurney
e381fd293d const'ify an arg that we don't update... 2015-07-29 23:37:15 +00:00
John-Mark Gurney
2ff9c4f915 Complete the move that was started w/ r263218.. For some reason I
didn't delete the files, so that means we need to bring the changes in
r282726 to the correct files..

make tinderbox completed with this patch...
2015-07-11 03:12:34 +00:00
John-Mark Gurney
275a0a97ed upon further examination, it turns out that _unregister_all already
provides the guarantee that no threads will be in the _newsession code..
This is provided by the CRYPTODRIVER lock...  This makes the pause
unneeded...
2015-07-08 22:48:41 +00:00
John-Mark Gurney
9d38fd076e address an issue where consumers, like IPsec, can reuse the same
session in multiple threads w/o locking..  There was a single fpu
context shared per session, if multiple threads were using the session,
and both migrated away, they could corrupt each other's fpu context...

This patch adds a per cpu context and a lock to protect it...

It also tries to better address unloading of the aesni module...
The pause will be removed once the OpenCrypto Framework provides a
better method for draining callers into _newsession...

I first discovered the fpu context sharing issue w/ a flood ping over
an IPsec tunnel between two bhyve machines...  The patch in D3015
was used to verify that this fix does fix the issue...

Reviewed by:	gnn, kib (both earlier versions)
Differential Revision:        https://reviews.freebsd.org/D3016
2015-07-08 19:15:29 +00:00
John-Mark Gurney
a13589bc47 unroll the loop slightly... This improves performance enough to
justify, especially for CBC performance where we can't pipeline..  I
don't happen to have my measurements handy though...

Sponsored by:	Netflix, Inc.
2015-07-07 20:31:09 +00:00
John-Mark Gurney
5a550cca9a Fix for non-random IV's when CRD_F_IV_PRESENT and CRD_F_IV_EXPLICIT
flags are not specified... This bug was introduced in r275732...

This only affects IPsec ESP only policies w/ the aesni module loaded,
other subsystems specify one or both of the flags...

Reviewed by:	gnn, delphij, eri
2015-07-06 19:30:29 +00:00
John-Mark Gurney
bcc0b68477 remove _NORMAL flag which isn't suppose to be used w/ _alloc_ctx...
Reviewed by:	kib (a while ago)
2015-07-06 19:17:56 +00:00
Craig Rodrigues
800be1b6f9 In the version of gcc in the FreeBSD tree, this modification was made to
the compiler in svn r242182:

#if STDC_HOSTED
#include <mm_malloc.h>
#endif

A similar change was done to clang in the FreeBSD tree in svn r218893:

However, for external gcc toolchains, this patch is not in the compiler's header
file.

This patch to FreeBSD's aesni code allows compilation with an external
gcc toolchain.

Differential Revision: https://reviews.freebsd.org/D2285
Reviewed by:  jmg, dim
Approved by:  dim
2015-04-16 17:42:52 +00:00
John-Mark Gurney
08fca7a56b Add some new modes to OpenCrypto. These modes are AES-ICM (can be used
for counter mode), and AES-GCM.  Both of these modes have been added to
the aesni module.

Included is a set of tests to validate that the software and aesni
module calculate the correct values.  These use the NIST KAT test
vectors.  To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors.  Using a port
is necessary as the test vectors are around 25MB.

All the man pages were updated.  I have added a new man page, crypto.7,
which includes a description of how to use each mode.  All the new modes
and some other AES modes are present.  It would be good for someone
else to go through and document the other modes.

A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.

Add a timing safe bcmp for use to compare MACs.  Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.

Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place.  The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.

We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.

Obtained from:	p4: //depot/projects/opencrypto
Relnotes:	yes
Sponsored by:	FreeBSD Foundation
Sponsored by:	NetGate
2014-12-12 19:56:36 +00:00
Dag-Erling Smørgrav
136fae42a9 Fix gcc build: preserve const qualifier when casting input values.
Noticed by:	bz@
Submitted by:	dim@
2014-11-11 13:37:28 +00:00
Dag-Erling Smørgrav
133cdd9e13 Constify the AES code and propagate to consumers. This allows us to
update the Fortuna code to use SHAd-256 as defined in FS&K.

Approved by:	so (self)
2014-11-10 09:44:38 +00:00
Konstantin Belousov
27007c6576 Put the aesni_cipher_setup() and aesni_cipher_process() functions into
the file which is compiled with SSE disabled.  The functions set up
the FPU context for kernel, and compiler optimizations which could
lead to use of XMM registers before the fpu_kern_enter(9) is called or
after fpu_kern_leave(9), panic the machine.

Discussed with:	jmg
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-06-24 06:55:49 +00:00
Konstantin Belousov
633034fe0e Add FPU_KERN_KTHR flag to fpu_kern_enter(9), which avoids saving FPU
context into memory for the kernel threads which called
fpu_kern_thread(9).  This allows the fpu_kern_enter() callers to not
check for is_fpu_kern_thread() to get the optimization.

Apply the flag to padlock(4) and aesni(4).  In aesni_cipher_process(),
do not leak FPU context state on error.

Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-06-23 07:37:54 +00:00
Warner Losh
3bdf775801 NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
2014-04-13 05:21:56 +00:00
John-Mark Gurney
8083f14fc2 replace the kernel's version w/ cperciva's implementation... In all
my tests, it is faster ~20%, even on an old IXP425 533MHz it is ~45%
faster...  This is partly due to loop unrolling, so the code size does
significantly increase...  I do plan on committing a version that
rolls up the loops again for smaller code size for embedded systems
where size is more important than absolute performance (it'll save ~6k
code)...

The kernel implementation is now shared w/ userland's libcrypt and
libmd...

We drop support for sha256 from sha2.c, so now sha2.c only contains
sha384 and sha512...

Reviewed by:	secteam@
2014-03-16 01:43:23 +00:00
John-Mark Gurney
97447ea423 copy these files from lib/libmd in preperation for moving these files
into the kernel...
2014-03-16 00:57:26 +00:00
John-Mark Gurney
9164a239ea fix broken style(9) in r258399
Pointed out by:	brd
2013-11-23 00:28:18 +00:00
John-Mark Gurney
23fc6e1652 flag that the aesni driver is sync... This means we don't waste a
context switch just to call the done callback...  On my machine, this
improves geli/gzero decrypt performance by ~27% from 550MB/sec to
~700MB/sec...

MFC after:	3 days
2013-11-20 20:25:27 +00:00
John-Mark Gurney
038ffd3e43 make it so that from/to can be missaligned as it can happen (the geli
regression manages to do it)...  We use a packed struct to coerce
gcc/clang into producing unaligned loads (there is not packed pointer
attribute, otherwise this would be easier)...

use _storeu_ and _loadu_ when using the structure is overkill...

be better at using types properly...  Since we allocate our own key
schedule and make sure it's aligned, use the __m128i type in various
arguments to functions...

clang ignores __aligned on prototypes and gcc errors on them, leave them
in comments to document that these function arguments are require to be
aligned...

about all that changes is movdqa -> movdqu from reading the diff of the
disassembly output...

Noticed by:	symbolics at gmx.com
MFC after:	3 days
2013-11-06 19:14:49 +00:00
John-Mark Gurney
ff6c7bf5ca Use the fact that the AES-NI instructions can be pipelined to improve
performance... Use SSE2 instructions for calculating the XTS tweek
factor...  Let the compiler do more work and handle register allocation
by using intrinsics, now only the key schedule is in assembly...

Replace .byte hard coded instructions w/ the proper instructions now
that both clang and gcc support them...

On my machine, pulling the code to userland I saw performance go from
~150MB/sec to 2GB/sec in XTS mode.  GELI on GNOP saw a more modest
increase of about 3x due to other system overhead (geom and
opencrypto)...

These changes allow almost full disk io rate w/ geli...

Reviewed by:	-current, -security
Thanks to:	Mike Hamburg for the XTS tweek algorithm
2013-09-03 18:31:23 +00:00
Andre Oppermann
bf0354c0f2 Fix const propagation issues to make GCC happy.
Submitted by:	Michael Butler <imb@protected-networks.net>
2013-07-11 16:27:11 +00:00
Andre Oppermann
6856398eab SipHash is a cryptographically strong pseudo-random function (a.k.a. keyed
hash function) optimized for speed on short messages returning a 64bit hash/
digest value.

SipHash is simpler and much faster than other secure MACs and competitive
in speed with popular non-cryptographic hash functions.  It uses a 128-bit
key without the hidden cost of a key expansion step.  SipHash iterates a
simple round function consisting of four additions, four xors, and six
rotations, interleaved with xors of message blocks for a pre-defined number
of compression and finalization rounds.  The absence of  secret load/store
addresses or secret branch conditions avoid timing attacks.  No state is
shared between messages.  Hashing is deterministic and doesn't use nonces.
It is not susceptible to length extension attacks.

Target applications include network traffic authentication, message
authentication (MAC) and hash-tables protection against hash-flooding
denial-of-service attacks.

The number of update/finalization rounds is defined during initialization:

 SipHash24_Init() for the fast and reasonable strong version.
 SipHash48_Init() for the strong version (half as fast).

SipHash usage is similar to other hash functions:

 struct SIPHASH_CTX ctx;
 char *k = "16bytes long key"
 char *s = "string";
 uint64_t h = 0;
 SipHash24_Init(&ctx);
 SipHash_SetKey(&ctx, k);
 SipHash_Update(&ctx, s, strlen(s));
 SipHash_Final(&h, &ctx);  /* or */
 h = SipHash_End(&ctx);    /* or */
 h = SipHash24(&ctx, k, s, strlen(s));

It was designed by Jean-Philippe Aumasson and Daniel J. Bernstein and
is described in the paper "SipHash: a fast short-input PRF", 2012.09.18:
 https://131002.net/siphash/siphash.pdf
 Permanent ID: b9a943a805fbfc6fde808af9fc0ecdfa

Implemented by:	andre (based on the paper)
Reviewed by:	cperciva
2013-07-11 14:18:38 +00:00
Xin LI
76a207c2b9 Sync with KAME.
MFC after:	1 month
2013-07-09 22:04:35 +00:00
Robert Millan
f19122edbf Allow assert() to operate correctly when building userland code. 2013-07-09 10:27:26 +00:00
Pawel Jakub Dawidek
45b56a6ba2 When porting XTS-related code from OpenBSD I forgot to update copyright (only
OpenBSD was credited in one of two commits). Fix it.

Reported by:	Theo de Raadt <deraadt@cvs.openbsd.org>
Reviewed by:	Damien Miller <djm@mindrot.org>
2013-02-20 22:59:53 +00:00
Kevin Lo
9823d52705 Revert previous commit...
Pointyhat to:	kevlo (myself)
2012-10-10 08:36:38 +00:00
Kevin Lo
a10cee30c9 Prefer NULL over 0 for pointers 2012-10-09 08:27:40 +00:00
Konstantin Belousov
8c6f8f3d5b Add support for the extended FPU states on amd64, both for native
64bit and 32bit ABIs.  As a side-effect, it enables AVX on capable
CPUs.

In particular:

- Query the CPU support for XSAVE, list of the supported extensions
  and the required size of FPU save area. The hw.use_xsave tunable is
  provided for disabling XSAVE, and hw.xsave_mask may be used to
  select the enabled extensions.

- Remove the FPU save area from PCB and dynamically allocate the
  (run-time sized) user save area on the top of the kernel stack,
  right above the PCB. Reorganize the thread0 PCB initialization to
  postpone it after BSP is queried for save area size.

- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
  well. FPU state is only useful for suspend, where it is saved in
  dynamically allocated suspfpusave area.

- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
  enabled.

- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
  mcontext_t has a valid pointer to out-of-struct extended FPU
  state. Signal handlers are supplied with stack-allocated fpu
  state. The sigreturn(2) and setcontext(2) syscall honour the flag,
  allowing the signal handlers to inspect and manipilate extended
  state in the interrupted context.

- The getcontext(2) never returns extended state, since there is no
  place in the fixed-sized mcontext_t to place variable-sized save
  area. And, since mcontext_t is embedded into ucontext_t, makes it
  impossible to fix in a reasonable way.  Instead of extending
  getcontext(2) syscall, provide a sysarch(2) facility to query
  extended FPU state.

- Add ptrace(2) support for getting and setting extended state; while
  there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.

- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
  consumers, making it opaque. Internally, struct fpu_kern_ctx now
  contains a space for the extended state. Convert in-kernel consumers
  of fpu_kern KPI both on i386 and amd64.

First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.

Tested by:	pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after:	1 month
2012-01-21 17:45:27 +00:00
Pawel Jakub Dawidek
14a0d24607 Update Copyright.
MFC after:	3 days
2011-10-27 14:15:26 +00:00
Pawel Jakub Dawidek
5fa1b35081 Improve AES-NI performance for AES-XTS:
- Operate on uint64_t types when doing XORing, etc. instead of uint8_t.
- Don't bzero() temporary block for every AES block. Do it once for entire
  data block.
- AES-NI is available only on little endian architectures. Simplify code
  that takes block number from IV.

Benchmarks:

Memory-backed md(4) device, software AES-XTS, 4kB sector:

	# dd if=/dev/md0.eli bs=1m
	59.61MB/s

Memory-backed md(4) device, old AES-NI AES-XTS, 4kB sector:

	# dd if=/dev/md0.eli bs=1m
	97.29MB/s

Memory-backed md(4) device, new AES-NI AES-XTS, 4kB sector:

	# dd if=/dev/md0.eli bs=1m
	221.26MB/s

127% performance improvement between old and new code.

Harddisk, raw speed:

	# dd if=/dev/ada0 bs=1m
	137.63MB/s

Harddisk, software AES-XTS, 4kB sector:

	# dd if=/dev/ada0.eli bs=1m
	47.83MB/s (34% of raw disk speed)

Harddisk, old AES-NI AES-XTS, 4kB sector:

	# dd if=/dev/ada0.eli bs=1m
	68.33MB/s (49% of raw disk speed)

Harddisk, new AES-NI AES-XTS, 4kB sector:

	# dd if=/dev/ada0.eli bs=1m
	108.35MB/s (78% of raw disk speed)

58% performance improvement between old and new code.

As a side-note, GELI with AES-NI using AES-CBC can achive native disk speed.

MFC after:	3 days
2011-10-27 14:07:57 +00:00
Konstantin Belousov
93ed70f9b4 Fix a bug in the result of manual assembly.
Reported by:	Stefan Grundmann <sg2342 googlemail com>
PR:	kern/155118
MFC after:	3 days
2011-03-02 14:56:58 +00:00
Rebecca Cran
3283511248 Make private functions static.
PR:		kern/43611
Submitted by:	Matt Emmerton <matt at gsicomp.on.ca>
Reviewed by:	kib
MFC after:	3 days
2011-02-21 16:21:43 +00:00
Konstantin Belousov
17ca6d98e1 Remove DEBUG sections.
MFC after:	3 days
2010-11-27 15:41:44 +00:00
Konstantin Belousov
3e07b6217f MFaesni r215427:
Only save FPU context when not executing in the context of the crypto
thread.

Tested by:	Mike Tancsa
MFC after:	1 week
2010-11-26 14:35:20 +00:00
Konstantin Belousov
1563ee36b9 Only save FPU context when not executing in the context of the crypto
thread.

Tested by:	Mike Tancsa
2010-11-17 16:17:15 +00:00
Dimitry Andric
235610273e Change two missed instances of 'retq' in aeskeys_i386.S to 'retl', which
makes it possible to assemble this file with gas from newer binutils.

Reviewed by:	kib
2010-10-13 17:55:53 +00:00