Instead, leave the fomat as unspecified (if it hasn't been) and use the
-p flag as a hint to 'context' if no other formatting option is specified.
This fixes `diff -purw`, used frequently by emaste, and matches the behavior
of its GNU counterpart.
PR: 250015
Reviewed by: emaste
MFC after: 1 week
Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, in configuration
files, or in the documentation, but 19 uses have been identified in C
source files or headers outside the contrib and sys/contrib directories.
This commit makes it possible to set _PATH_LOCALBASE in paths.h to use
a different prefix for locally installed software.
In order to avoid changes to openssh source files, LOCALBASE is passed to
the build via Makefiles under src/secure. While _PATH_LOCALBASE could have
been used here, there is precedent in the construction of the path used to
a xauth program which depends on the LOCALBASE value passed on the compiler
command line to select a non-default directory.
This could be changed in a later commit to make the openssh build
consistently use _PATH_LOCALBASE. It is considered out-of-scope for this
commit.
Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26942
- Sort flags
- Stylize incr|+ and decr|- properly
- Add a missing period at the end of the description
- Use the standard layout for the EXAMPLES section (remove the list macro
and add indentation to the code block)
Move all the data files for the calendar(1) program, except
calendar.freebsd to the calendar-data package. When a file
can't be found, and /usr/local/share/calendar doesn't exist
provide a helpful hint to install this package.
Reviewed by: se@
Differential Revision: https://reviews.freebsd.org/D26926
Make the Ethernet PCP codepoint configurable
for L2 local traffic, to allow lower latency for
iSCSI block IO. This addresses the initiator
side only.
Reviewed by: mav, trasz, bcr
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26739
libjail is pretty small, so it makes for a good proof of concept demonstrating
how a system library can be wrapped to create a loadable Lua module for flua.
* Introduce 3lua section for man pages
* Add libjail module
Reviewed by: kevans, manpages
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26080
Ever since r192762 nfsstat has included a few fields whose values were
always 0. They were copied from OpenBSD, but have never been used on
FreeBSD. Don't display them.
Reviewed by: rmacklem
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D26920
Calendar files in /usr/lcoal/share/calendar take precedence over files in
the base system. They can be provided by a port or package, but since such
a port has not been committed, yet, no specific port name is suggested.
In fact, multiple ports could exist (e.g. per locale) without conflicting
with each other.
Calendar files in LOCALBASE override similarily named ones in the base
system. This could easily be changed if the base system calendars should
have precedence, but it could lead to a violation of POLA since then the
port's files were ignored unless those in base have been deleted.
There was no definition of _PATH_LOCALBASE in paths.h, but verbatim uses
of /usr/local existed for _PATH_DEFPATH. Use _PATH_LOCALBASE here to ease
a consistent modification of this prefix.
Reviewed by: imp, pfg
Differential Revision: https://reviews.freebsd.org/D26882
Add a small example.
Cross reference clean up for colcrt, nroff and tbl.
Reviewed by: gbe@, bcr@
Approved by: gbe@
Differential Revision: https://reviews.freebsd.org/D26864
Pad the icmp6stat structure so that we can add more counters in the
future without breaking compatibility again, last done in r358620.
Annotate the rarely executed error paths with __predict_false while
here.
Reviewed by: bz, melifaro
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26578
Not that you can regenerate the motd by editing motd.template and
running 'service motd restart' rather than rebooting.
Small wordsmithing by me, and updated the example from FreeBSD 2.1.6.1
release to 12.1 release.
Submitted by: Dan Mack
It turns out that the majority of the test time for the mkimg tests isn't
mkimg itself but rather the use of jot and hexdump which can be quite slow
on emulated platforms such as QEMU.
On QEMU-RISC-V this reduces the time for `kyua test mkimg_test` from 655
seconds to 200. And for CheriBSD on QEMU-CHERI this saves 4-5 hours (25%
of the time for the entire testsuite!) since jot ends up triggering slow
functions inside the QEMU emulation a lot.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D26796
According to git blame the trymmap() function was added in 1996 to skip
mmap() calls for NFS file systems. However, nowadays mmap() should be
perfectly safe even on NFS. Importantly, onl ufs and cd9660 file systems
were whitelisted so we don't use mmap() on ZFS. It also prevents the use
of mmap() when bootstrapping from macOS/Linux since on those systems the
trymmap() function was always returning zero due to the missing MFSNAMELEN
define.
This change keeps the trymmap() function but changes it to check whether
using mmap() can reduce the number of system calls that are required.
Using mmap() only reduces the number of system calls if we need multiple read()
syscalls, i.e. if the file size is > MAXBSIZE. However, mmap() is more expensive
than read() so this sets the threshold at 4 fewer syscalls. Additionally, for
larger file size mmap() can significantly increase the number of page faults,
so avoid it in that case.
It's unclear whether using mmap() is ever faster than a read with an appropriate
buffer size, but this change at least removes two unnecessary system calls
for every file that is installed.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D26041
- When flushing extra lines after all input has been processed, make
sure that local state is reinitialized correctly.
- When -f is specified, make sure to end output with a full newline.
- Fix some style issues and update comments.
- Add some regression tests.
PR: 249308
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26536
Allow the DSCP codepoint also to be configurable
for the traffic in the direction from the initiator
to the target, such that writes and any requests
are also treated in the appropriate QoS class.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26714
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order
- normalizing date format
- AUTHORS section without An macro
`cpuset -g -x N` along with requested information always prints
message `cpuset: getdomain: Invalid argument'. The EINVAL is returned
from kern_cpuset_getdomain(), since it doesn't expect CPU_LEVEL_WHICH
and CPU_WHICH_IRQ parameters.
To fix the error, do not call cpuset_getdomain() when `-x' is specified.
MFC after: 1 week
Adding the "-c" option used to show detailed per-connection
congestion control state for TCP sessions.
This is one summary patch, which adds the relevant variables into
xtcpcb. As previous "spare" space is used, these changes are ABI
compatible.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26518
colcrt(1) and nroff(1) where removed in r319664.
Remove references to these commands in ul(1) man page.
PR: 244127
Reported by: freebsd@tim.thechases.com
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D2614
Improve friendlyness of the command line by accepting the percent brightness
in both format: with or without a trailing '%'
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26692
Add an "nextnoskip" sysctl that allows for listing of sysctls intended to be
normally skipped for cost reasons.
This makes it so the names/descriptions of those sysctls can be discovered with
sysctl -aN/sysctl -ad/sysctl -at.
It also makes it so children are visited when a node flagged with CTLFLAG_SKIP
is explicitly requested.
The intended use case is to mark the root "kstat" node with CTLFLAG_SKIP so that
the extensive and expensive stats are skipped by default but may still be easily
obtained without having to know them all (which may not even be possible) and
request each one-by-one.
Reviewed by: jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26560
* Add some examples showing binary, arguments and file info from living
processes.
* Show information from core dumps including an attempt using an old core file.
* While here, fix warning 'no blank before trailing delimiter' reported by igor.
Approved by: manpages (0mp@)
Differential Revision: https://reviews.freebsd.org/D25467
This change is based on the nexthop objects landed in D24232.
The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.
Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.
With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.
User-visible changes:
The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.
All routes now comes with weight, default weight is 1, maximum is 2^24-1.
Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.
Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1
route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20
netstat -6On
Nexthop groups data
Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2
Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default
Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449
This tool is used to configure registered backlights.
It can incr/decr (default to 10%) or accept a percentage value directly.
Reviewed by: manpages (gbe@)
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26251
zgrep should exit with success when given multiple files and the
pattern is found in at least one file. Prior to this change,
it would exit with success only if the pattern was found in _every_ file.
Reviewed by: dab ngie
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26616
This version incorporates many fixes in particular a fix for vi -w
Another approach was proposed to merge those fixes (see review), I find
it easier to track changes if we keep importing snapshot on regular
basis
PR: 241985
Reported by: fernape
Differential Revision: https://reviews.freebsd.org/D26158
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
root's calendar files three times, once each for root, toor and
daemon.
This relates to bug 246943, but does not solve it. See discussion in
bug report for more details.
PR: 246943
Reported by: wcarson.bugzilla@disillusion.net
Basically it reverts one chunk that reversed the parsing logic, making
legacy variants of invocation, like `procstat -a -f', non-operational.
Reported and tested by: Dewayne Geraghty <dewayne@heuristicsystems.com.au>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Add EXAMPLES section showing the use of -a and -s flags and how which(1)
treates duplicates.
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D26182
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
Intent is to mimic Solaris commands with the same names.
Submitted by: Juraj Lutter <juraj@lutter.sk>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26310
- Exit with an error if no path is specified.
- Man page typo.
- Error message typo.
Reviewed by: kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26376
* Remove identical or almost identical headers
* Only build aout.c on amd64 and i386. None of the the other current
architectures ever supported running a.out binaries
* Enable on all architectures
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26369
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
We currently set MK_MAN=no in $BSARGS so MK_MAN_UTILS will also be false
which means that the makewhatis symlink will not be created.
This change fixes the build when using both -DBUILD_WITH_STRICT_TMPPATH and
-DBOOTSTRAP_ALL_TOOLS.
Tested by: andrew
Differential Revision: https://reviews.freebsd.org/D16761
Main changes:
* Vim-style expandtab option
* Provides Turkish translation
* Backspace now deletes \ rather than being escaped
* T during motion commands is now VI-compatible
* Encoding related fixes, such as UTF-8 detection
* Fixed a number of memory management issues
MFC after: 3 weeks
Lots of code refactoring, simplification and cleanup.
Lots of new unit-tests providing much higher code coverage.
All courtesy of rillig at netbsd.
Other significant changes:
o new read-only variable .SHELL which provides the path of the shell
used to run scripts (as defined by the .SHELL target).
o variable parsing detects more errors.
o new debug option -dl: LINT mode, does the equivalent of := for all
variable assignments so that file and line number are reported for
variable parse errors.
Due to a copy/paste error, the "getacl" field was duplicated, but only in
XML or JSON mode, not in txt mode.
Discussed with: rmacklem
MFC after: 1 week
Sponsored by: Axcient
In the util-linux version of script, it will always exit with succes.
Except when run with -e, in which case it will have the exit value of
the child. BSD Script already uses the child's exit value for its exit
value. Some config and other helper scripts depend on being able to
specify -e. Accept it for compatibility since we'll already to the
right thing, but otherwise we ignore it.
When diff is invoked with -l it will spawn the pr(1) program.
In some circumpstances the pr(1) was not properly killed when diff program
exits.
Submitted by: Bret Ketchum
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26232
Add EXAMPLES section covering all the flags except -m and -bTu covered by
other flags.
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D26219
By default, lockf(1) opens its lock file O_RDONLY|O_EXLOCK. On NFS, if the
file already exists, this is split into opening the file read-only and then
requesting an exclusive lock -- and the second step fails because NFS does
not permit exclusive locking on files which are opened read-only.
The new -w option changes the open flags to O_WRONLY|O_EXLOCK, allowing it
to work on NFS -- at the cost of not working if the file cannot be opened
for writing.
(Whether the traditional BSD behaviour of allowing exclusive locks to be
obtained on a file which cannot be opened for writing is a good idea is
perhaps questionable since it may allow less-privileged users to perform
a local denial of service; however this behaviour has been present for a
long time and changing it now seems like it would cause problems.)
Reviewed by: rmacklem
Differential Revision: https://reviews.freebsd.org/D26005
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
Add small example section showing general use and -d and -h flags
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D26172
Every version of patch since the first one posted to mod.sources in 1985 have
included a heuristic for coping with the state of email messaging at the
time. This heuristic would add up to 4 blank lines to a patch if it thought it
needed it. The trouble is, though this causes at least one bug.
The bug in my case is that if you have a context diff whose last hunk only
deletes 3 or fewer lines, then if you try to reverse apply it with -R, it will
fail. The reason for this is the heuristic builds an internal representation
that includes those blank lines. However, it should really replicate the lines
from the pattern lines line it would any other time, not assume they are blank
lines. Removing this heuristic will prevent patch from misapplying the lines
removed after applying a 'fuzz' factor to the previous blank line in the file. I
believe this will only affect 'new-style' 4.3BSD context diffs and not the
older-style 4.2BSD diffs and plain, non-context diffs. It won't affect any of
the newer formats, since they don't use the 'omitted' construct in the same way.
Since this heuristic was put into patch at a time when email / etc ate trailing
white space on a regular basis, and since it's clear that this heuristic is the
wrong thing to do at least some of the time, it's better to remove it
entirely. It's not been needed for maybe 20 years since patch files are not
usually corrupted. If there are a small number of patch files that would benefit
from this corruption fixing, those already-currupt patches can be fixed by the
addition of blank lines. I'd wager that no one will ever come to me with an
example of a once-working patch file that breaks with this change. However, I
have 2 patches from the first 195 patches to 2.11BSD that are affected by this
bug, suggesting that the relative frequency of the issue has changed
signficantly since the original heuristic was put into place.
Reviewed by: phk@
Differential Revision: https://reviews.freebsd.org/D26081
- a couple of descriptions are incomplete
- synopsis doesn't show that all arguments are optional
- missing an ENVIRONMENT section with TERM mentioned
PR: 84670
Submitted by: Gary W. Swearingen <garys at opusnet dot com>
Reviewed by: bcr
Approved by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26009
- Instead of using isatty() to decide whether to call tcgetattr(), just
call tcgetattr() directly, since that's all that isatty() does anyway.
- Simplify error handling in termset(). Check for errno != ENOTTY from
tcgetattr() to handle errors that may be raised while running
script(1) under a debugger.
PR: 248377
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
My change to allow bootstrapping pwd_mkdb (r363992) resulted in i386 build
failures because the bootstrap header was being included in non-bootstrap chpass.
Dropping the no longer required pwd_mkdb include path from chpass fixes
the build, but to be certain that the failure doesn't get re-introduced,
I've also moved the bootstrap pwd.h into a subdirectory so that adding
-I${SRCTOP}/usr.sbin/pwd_mkdb doesn't pull it in.
Reported by: mjg
Otherwise recorded sessions of some interactive programs do not play
back properly.
PR: 248377
Submitted by: Soumendra Ganguly <0.gangzta@gmail.com>
MFC after: 1 week
libregex is incomplete, but it's a bit less buggy than the in-base
libgnuregex and mostly OK.
While here, rename -DIWTH_GNU -> -DWITH_GNU_COMPAT; the option implies
that we're compatible with the GNU counterpart, not that we're including GNU
anything.
The tests compare the command output (including of error cases) with the
expected output and exit code.
Not all tests are executed, since some expect to have a known good bc and
dc binary installed and compare results of large amounts of generated data
being processed by both versions to test for regressions.
This version omits the printing of a copyright header in interactive mode
and the dc command now exits after execution of the commands passed via -e
or -f instead of switching to interactive mode. To pass further commands
via STDIN when dc has been invoked with -e or -f, add "-f -" to the
parameter list.
r363679 is in-fact the future change referenced by the comment, helpfully
left and forgotten by kevans. Instead of just silently not matching, we
should now be erroring out with vigor.
It's currently unclear to me how this could have worked previously; \n here
is not a literal newline but actual '\' 'n', and was getting passed to the
underlying regex engine as such. regex(3) does not translate this to a
newline, and this became an error because we don't really allow escaping
of arbitrary ordinary characters anymore.
Run the pattern strings through printf to make sure we're dealing with real
newlines before passing them through to atf_check, which ultimately feeds
them directly to regcomp(3).
This fix is different than that will be needed for sed, in that this is the
proper way to inject newlines into search strings as long as regex(3)
won't combine \ + n as folks might expect.
Reported by: Jenkins via lwhsu
MFC after: 1 week
As part of onboarding, ensure that I'm listed in the FreeBSD calendar file,
while listening to Don't Take Away The Music by Tavares.
Reviewed by: 0mp, bcr
Approved by: 0mp (mentor), allanjude (mentor)
Differential Revision: D25856
implementation. The old description was left over from the 4.4 BSD Lite
import in 1994, and was a bit misleading (not all arches use simulated
reference bits, some implement reference tracking in hardware).
In 2018, r338094 removed the commented-out code for supporting the -t
command line option which had been present since the BSD 4.4 Lite import,
but was never implemented for freebsd.
This does the same for the man page.
'y' does not handle bracket expressions, treat '[' as ordinary character
and do not apply bracket expression checks (GNU sed agrees).
PR: 247931
Reviewed by: pfg, kevans
Tested by: antoine (exp-run), Quentin L'Hours <lhoursquentin@gmail.com>
Differential Revision: https://reviews.freebsd.org/D25640
- Handle whitespace with long flags that take arguments:
echo 'foo bar' > test
zgrep --regexp='foo bar' test
- Do not hang reading from stdin with patterns in a file:
echo foobar > test
echo foo > pattern
zgrep -f pattern test
zgrep --file=pattern test
- Handle any flags after -e:
echo foobar > test
zgrep -e foo --ignore-case < test
These two are still outstanding problems:
- Does not handle flags that take an argument if there is no
whitespace:
zgrep -enfs /etc/rpc
- When more than one -e pattern used matching should occur for all
patterns (similar to multiple patterns supplied with -f file).
Instead only the last pattern is used for matching:
zgrep -e rex -e nfs /etc/rpc
(This problem is masked in the unpatched version by the "any
flags after -e" problem.)
Add tests for the above problems.
Update the mange and add references to gzip(1) and zstd(1) and also
document the remaining known problems.
PR: 247126
Approved by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25613
With r318443, atrun was moved from /etc/crontab to /etc/cron.d/at,
but the man-page was unfortunately not updated to reflect this.
PR: 248048
Submitted by: debdrup
Reported by: yoitsmeremember+fbsd at gmail.com
Reviewed by: Pau Amma <pauamma at gundo.com>
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25709
GLibc expects six 'X' characters in the mkstemp template argument and
will return EINVAL otherwise.
Reviewed By: emaste, imp, mjg
Differential Revision: https://reviews.freebsd.org/D25662
The current localedef simply assumes that the locale headers on build system
are compatible with those on the target system which is not necessarily true.
It generally works on FreeBSD (as long as we don't change the locale headers),
but Linux and macOS provide completely different locale headers.
This change adds new bootstrap headers that namespace certain xlocale
structures defined or used by in the headers that localdef needs.
This is required since system headers *must* be able to include the "real"
locale headers for printf(), etc., but we also want to access the target
systems's internal locale structures.
Reviewed By: yuripv, brooks
Differential Revision: https://reviews.freebsd.org/D25229
I hit those error messages when using a localedef built against headers
that don't match the target system (cross-building from a Linux host).
This problem will be fixed in the next commit.
Unset VIS_SAFE flag as it turned out to be actually unsafe
for continuos top display as it's passing through sequences
resulting cursor movement (backspace, tab, carriage-return),
and explicitly set VIS_TAB for the same reason.
Reported by: Mark Millard <marklmi@yahoo.com>, swills
Tested by: Mark Millard <marklmi@yahoo.com>, swills
- Part of BAT payload location was lost due to invalid
BAT entry encoding type (32 bits instead of 64 bits)
- The sequence of PB/SB entries in BAT was broken due to
off-by-one index check. It worked for smaller than
4Gb because there were no SB entries in BAT.
MFC after: 1 day
Make sure we call fsync(2) on strip result
in case of "safecopy" and "strip -o tempcopy -- src"
before renaming tempcopy to destination.
MFC after: 3 weeks
X-MFC-With: r363064
Key changes include reduced noise at end of failed build log
and avoid evaluation of unnecessary terms in conditionals.
In META MODE; a target flagged .META is out-of-date if meta file
is missing
MFC after: 1 week
Also, make it not break if STRIPBIN points to strip version without -o support
and destination does not exist before installing.
Reported by: lwhsu
MFC after: 1 month
X-MFC-With: 363064
Make it not break if STRIPBIN points to strip version without -o support.
In that case, perform extra copy just like before r363064.
MFC after: 1 month
X-MFC-With: 363064
Currently, "install -s -S" behaviour is inefficient for upgrade.
First it finds that destination file already exists and copies
source file to temporary file. Then it calls strip(1)
with name of temporary file as single agrument and our strip(1) creates
another temporary file in the /tmp (or TMPDIR) making another copy
that is finally copied to DESTDIR third time.
Meantime, strip(1) has an option "-o dst" to specify destination
so install(1) is allowed to skip initial copying from obj to DESTDIR.
This change makes it do so.
Take a look at https://reviews.freebsd.org/D25551 for details
and efficiency numbers (in short: upto 32% gained for installword).
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D25551
Small EXAMPLES section showing the use of -s, -k and the different exit values
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25575
This version fixes a regression with regard to tradtional behavior of the
non-standard FreeBSD option "-e". In the previous version "-e quit" caused
bc to exit before any computations had been performed, since all -e option
parameters were concatenated and parsed as a whole, with quit causing the
program to exit as soon as it was parsed. This version parses and executes
commands passed with -e one by one and only exits after all prior commands
have been executed.
This commit is not a SVN merge, since the vendor import had been performed
after the import to contrib. Instead the contents of contrib/bc has been
removed and the new version is copied over unchanged from vendor/bc/dist.
* Small addition with four simple examples
* While here, remove three obsolete .Tn macros
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25462
* Add examples showing the use of -f, -C, -s, -n
* Rework the two already present examples that were *format* examples
* Remove .Tn suggested by mandoc(1)
* Remove reference to gdb(1) since it is not present in current
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25406
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
These implementations of the bc and dc programs offer a number of advantages
compared to the current implementations in the FreeBSD base system:
- They do not depend on external large number functions (i.e. no dependency
on OpenSSL or any other large number library)
- They implements all features found in GNU bc/dc (with the exception of
the forking of sub-processes, which the author of this version considers
as a security issue).
- They are significantly faster than the current code in base (more than
2 orders of magnitude in some of my tests, e.g. for 12345^100000).
- They should be fully compatible with all features and the behavior of the
current implementations in FreeBSD (not formally verified).
- They support POSIX message catalogs and come with localized messages in
Chinese, Dutch, English, French, German, Japanese, Polish, Portugueze,
and Russian.
- They offer very detailed man-pages that provide far more information than
the current ones.
The upstream sources contain a large number of tests, which are not
imported with this commit. They could be integrated into our test
framework at a latter time.
Installation of this version is controlled by the option "MK_GH_BC=yes".
This option will be set to yes by default in 13-CURRENT, but will be off
by default in 12-STABLE.
Approved by: imp
Obtained from: https://git.yzena.com/gavin/bc
MFC after: 4 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19982
* bugpoint.1
* clang.1
* llc.1
* lldb.1
* lli.1
* llvm-ar.1
* llvm-as.1
* llvm-bcanalyzer.1
* llvm-cov.1
* llvm-diff.1
* llvm-dis.1
* llvm-dwarfdump.1
* llvm-extract.1
* llvm-link.1
* llvm-mca.1
* llvm-nm.1
* llvm-pdbutil.1
* llvm-profdata.1
* llvm-symbolizer.1
* llvm-tblgen.1
* opt.1
Add newly generated manpages for:
* llvm-addr2line.1 (this is an alias of llvm-symbolizer)
* llvm-cxxfilt.1
* llvm-objcopy.1
* llvm-ranlib.1 (this is an alias of llvm-ar)
Note that llvm-objdump.1 is an exception, as upstream has both a plain
.1 file, and a .rst variant. These will have to be reconciled upstream
first.
MFC after: 3 days
-d and -v are not equivalent options. The former is more verbose than the
latter and the former does not actually send the signals while the latter does.
Let them have their own paragraphs.
From the point of view of the output, -v is equivalent to -s, so describe them
close to each other. The difference is that former actually sends the signals
and the latter doesn't.
PR: 247411
Approved by: manpages(0mp)
Differential Revision: https://reviews.freebsd.org/D25413
* Add four examples showing flags -e, -b, -d, -s
* Remove extra space at the end of the line reported by igor
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25426