Commit Graph

26 Commits

Author SHA1 Message Date
Matthew N. Dodd
79a9057038 HEADS UP! All 3c5x9 users!
- Rip out all the static softc stuff and do softc allocation the right way.
- Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY
  method to enumerate all non-PnP ISA devices.

  This has the following consequences:

	- No 'ep' devices may be hardwired.
	  - All hardwired devices will probably be detected twice.
	    By hardwired I mean:

		device          ep0     at isa? port 0x300 irq 10

	- 'ep' devices are ordered by bus, slot, and then MAC address.

- Make 3c509B cards work in PnP mode.  Yes, they really work.
- Convert over to using ifmedia for media selection.  No more of this
  lame 'linkX' stuff.
- Consolidate a lot of duplicated code.
- Make a stab at not breaking MII based PCCARD devices.
  I doubt that the PCCARD stuff works any more than it did before my
  changes but theres hope.  My PCCARD hardware should arrive in a
  week or so.
- Retreive the media settings from the card EEPROM rather than guessing.
  I've got a 3c509-TPO that thinks its got an AUI port and if others
  can report similar problems I'll write a bit of clever code that will
  fix this but right now it works correctly on all but 1 card.
- Clean up a few things and make some cosmetic changes.
- Add myself as the MAINTAINER since nobody else wants to.  I'm
  in the best position to do this as I've got an example of most
  of the cards:

	EISA	3c579	bnc/aui
	MCA	3c529	tp/aui
	ISA	3c509	tpo
	ISA-PnP	3c509B	combo

   If someone wants to send me a any cards I don't have I'd appriciate
   it.  Also welcome are 3c59x boards since I'll be folding if_vx and
   if_ep at some point.
1999-10-27 06:25:16 +00:00
Matthew N. Dodd
39b547ce4d - Split out the ISA and PCCARD specific code.
- Split out the prototypes, externs and struct decls from if_epreg.h into
  if_epvar.h.

- Add support for MCA based Etherlink III (3c529) devices.

None of this code is used right now; the old if_ep driver is still
in place and used.

I will eventually get around to converting if_ep_isa.c to newbus once I've
had a talk with Peter and DFR about the DEVICE_IDENTIFY() method.

I have tested this code on my PS/2.  It works.  I would like EISA and ISA
testers since my example hardware hasn't arrived yet.

Add:

dev/ep/if_ep.c          optional ep
dev/ep/if_ep_isa.c      optional ep isa
dev/ep/if_ep_eisa.c     optional ep eisa
dev/ep/if_ep_mca.c      optional ep mca
dev/ep/if_ep_pccard.c   optional ep card

to sys/conf/files

Remove:

i386/eisa/3c5x9.c             optional        ep
i386/isa/if_ep.c              optional        ep

from sys/i386/conf/files.i386

PCCARD testers wanted!

I will switch off and cvs rm the old driver in favor of this copy once
I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Tatsumi Hosokawa
6afaf5d480 3C574TX 16bit FastEtherlink PC-card support.
Reviewed by:	HAMADA Naoki <nao@tom-yam.or.jp>
Submitted by:	Osamu MIHARA <mihara@prd.fc.nec.co.jp>
1999-07-25 01:20:37 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Joerg Wunsch
03940bd636 Move the EP_ID_PORT out to 0x110, so it doesn't conflict with other port
usage at 0x100.  Quoted Justin's quotation from the manual as well, to
explain the technical background.

PR:		kern/4559
Submitted by:	Stephen J. Roznowski <sjr@home.net>
1997-10-27 06:15:10 +00:00
Jun-ichiro itojun Hagino
7c66fb14b3 if_ep.c clarification/simplification.
- irq = 9 problem (PR 4693)
- mbuf chaining oddity fixed. (PR 4693)
- trailer protocol has gone. (PR 4693)
- removed mbuf kludge, we got higher performance. (PR 4693)
- some indentation fixes

I'm sorry that I couldn't make a 2.2.5-RELEASE deadline.

PR:		4693
Reviewed by:	babkin@hq.icb.chel.su
Submitted by:	hamada@tom-yam.or.jp
1997-10-14 06:56:09 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
f806e8f0f1 Fixed pessimized (short) i/o port type.
The change in if_epreg.h affects if_epreg.o and 3c5x9.o.

These changes are probably harmless, but I can't test them.
1996-11-11 17:11:08 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
26a8b0bf7e Megacommit to straigthen out ETHER_ mess.
I'm pretty convinced after looking at this that the majority of our
drivers are confused about the in/exclusion of ETHER_CRC_LEN :-(
1996-08-06 21:14:36 +00:00
Atsushi Murai
0ed091876d Add interrupt register set up with original register value
before attaching. Without this fix, 3c579(EISA) never make
any H/W inturrupt.
Reviewed by:	"Justin T. Gibbs" <gibbs@freefall.freebsd.org>, nao@sbl.cl.nec.co.jp and owner-current on mailing list ;-)
Submitted by:	amurai@spec.co.jp, nao@sbl.cl.nec.co.jp
1996-07-19 13:20:05 +00:00
Nate Williams
333f7d7bb6 At long last, we know have support for the 3C589 in a FreeBSD release
using the existing files using the existing PCCARD support.  Now that
this is in place I would like to fixup the PCCARD hooks and remove the
if_zp driver.  At this point, we support everything we used to support
*AND MORE* with the PCCARD code.

Submitted by:	Naoki Hamada <nao@sbl.cl.nec.co.jp> (via the Nomad release)

[ This works on both my 3C589B and 3C589C ]
1996-06-14 22:11:38 +00:00
Justin T. Gibbs
6398c75dc7 Fix media type determination. 1996-02-28 17:19:04 +00:00
Justin T. Gibbs
eea817fc73 Clean up the 3c5x9 driver and add an eisaconf probe to it. This should
prevent it from conflicting with other drivers (like the aic7xxx driver).
Most of the work was in spliting out common portions of the driver and
making them generic enough to be called from the eisaconf probe.
1996-02-26 01:05:36 +00:00
Garrett Wollman
9b44ff2214 Clean up Ethernet drivers:
- fill in and use ifp->if_softc
	- use if_bpf rather than private cookie variables
	- change bpf interface to take advantage of this
	- call ether_ifattach() directly from Ethernet drivers
	- delete kludge in if_attach() that did this indirectly
1996-02-06 18:51:28 +00:00
Mike Pritchard
6c5e9bbdf5 Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.
1996-01-30 23:02:38 +00:00
Justin T. Gibbs
4a1e5d799a Finally commit Serge's multicast and "misc other changes" patch. I
don't have a network to test it on here, but it does probe my card okay.

Submitted by: "Serge A. Babkin" <babkin@hq.icb.chel.su>
1996-01-29 03:16:14 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Jordan K. Hubbard
c8aaabd573 Performance enhancements and a redesign of the transmitter code.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-04-10 21:25:06 +00:00
Jordan K. Hubbard
ec835d2414 * Promiscuous mode added and interrupt logic slightly changed
*  to reduce the number of adapter failures. Transceiver select
 *  logic changed to use value from EEPROM. Autoconfiguration
 *  features added.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-03-31 06:41:38 +00:00
David Greenman
0602287958 Patches from Serge Babkin to fix interrupt handling bugs.
Submitted by:	Serge Babkin
1995-03-23 06:53:39 +00:00
Justin T. Gibbs
72f30c2bd3 Andres Vega Garcia's improvements to the ep driver. This driver is a merging
of the 1.1.5 driver, a recent version of the NetBSD driver, Andres'
transmission start threshold code, and all other relavent changes to the driver
since it was brought into 2.0.  The multicast support from NetBSD has not be
folded in yet.  I've tested it under high loads for two weeks and it is now
robust enough to be included in the GENERIC kernel.
Reviewed by: gibbs
Submitted by:	vega@sophia.inria.fr (Andres Vega Garcia)
1994-11-13 10:12:37 +00:00
Andreas Schulz
780f8a2611 Reviewed by:
Submitted by:
Update the if_ep driver for the 3C579 and bring over some of the
changes from the netbsd driver.
This is not complete: the detection of the irq in the eisa does not
work and sometimes the reset for the 3C509 in ISA in an EISA bus system
don't work ( Need a hard reset to be found again == reset knob).
1994-09-03 18:10:44 +00:00
Andreas Schulz
96b4591b68 Committed the original NetBSD version of this driver to get the changes
made for FreeBSD as cvs diffs. This is the 3C509 ethernet driver.
1994-01-10 18:56:26 +00:00