While here do a bit of cleanup:
- declare local variables as such,
- make tmpdir_create() clean up logfile directories, to handle a
previously interrupt test run more gracefully.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This happens when compressing a previously uncompressed already-rotated
file, as happens when handling the 'p' flag in newsyslog.conf. The file
name is stored in a flexible array member, so these structures cannot be
stack allocated.
Also make sure that we call change_attrs() and do_zipwork() in dry-run
mode; they handle this properly, contrary to the commit log message for
r327451.
CID: 1008168
Github PR: https://github.com/freebsd/freebsd/pull/427
MFC after: 2 weeks
Submitted by: Radek Brich (original version)
When deleting a user, if its home directory does not belong to it, it should
not be removed. This is the promise that the manpage makes, the tool should
ensure that it respects that promise.
Add a regression test about it
PR: 244967
Submitted by: Eric Hanneken <eric@erichanneken.com>
MFC after: 3 days
headers. Device documentation often times give offsets relative to the
start of the entire VSEC, not just the post-header data area, so this
change makes it easier to correlate offsets.
Modules from ports/pkg are commonly installed to /boot/modules rather than to
the same directory the kernel resides in. Look there if a module is not found
next to the kernel.
Submitted by: mmacy
Reported by: Nick Principe <nap@iXsystems.com>
Approved by: mmacy (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
- Sort options.
- Do not use macros (like .Ar) to specify width for Bl (macros within that
string are not expanded).
- Use Cm instead of Ar for mode names.
- Fix some typos reported by mandoc.
- Move the documentation of the PID file from the -P flag description to
the FILES section.
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23941
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
With powerd_flags="-N", this makes powerd(8) exclude "nice" time when
computing the CPU utilization. This makes it possible to prevent
CPU-intensive "background" processes from spinning up the CPU.
Note that only *userland* CPU usage belonging to "nice" processes is
excluded; we do not track whether time spent in the kernel is on behalf
of nice or non-nice processes, so kernel-intensive nice processes can
still result in the CPU being sped up.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23868
This is the result of splitting r358153 in two, in order to avoid a build
system bug and being able to merge the change to previous releases..
Document better this file, updating the URL to the IANA registry and closely
match the official services.
For system ports (0 to 1023) we now try to follow the registry closely, noting
some historical differences where applicable.
As a side effect: drop references to unofficial Kerberos IV which was EOL'ed
on Oct 2006[1]. While it is conceivable some people may still use it in some
very old FreeBSD machines that can't be replaced easily, the use of it is
considered a security risk. Also drop the unofficial netatalk, which we
supported long ago in the kernel but was dropped long ago.
Leave for now smtps, even though it conflicts with IANA's submissions.
The change should have very little visibility, if any, but should be a
step closer to the current IANA database.
[1] https://web.mit.edu/kerberos/krb4-end-of-life.html
MFC after: 2 weeks
read() can return a short read, whereas stream_read() waits until the
full version string is read.
Submitted by: Ka Ho Ng <khng300_gmail.com>
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23591
Give up the battle to keep extra files in $MACHINE/compile to keep the file in
the tree. Instead, create CDIR (usually ../compile) if it doesn't exist when
we're using a default build location (eg, not using -d). If it does, we do
nothing. This only affects people that do old-school builds, but it's bit me a
dozen times since last summer so time to fix the bug.
This change reflects the ability to change machine_arch in a config file. This
is useful for including one config in another and changing the machine_arch
in the second one.
Currently, you can have multiple machine directives if they are otherwise
identical. Relax this so that only the machinename part is the same. This allows
one to change the machine arch in a different config file you've included easily.
Currently, the size of the swap device is unconditionally reported using
blocks, even if -h has been used.
- While here, switch to CONVERT_BLOCKS() instead of CONVERT() which will
avoid overflowing size counters (in human readable form see: r196244)
- Update the column headers to reflect that a size is being reported instead
of the block size units being used
Before:
$ swapinfo
Device 1K-blocks Used Avail Capacity
/dev/gpt/swapfs 1048576 0 1048576 0%
$
After:
$ swapinfo -h
Device Size Used Avail Capacity
/dev/gpt/swapfs 1.0G 0B 1.0G 0%
$
Differential Revision: https://reviews.freebsd.org/D23758
Reviewed by: kevans
MFC after: 3 weeks
This patch adds a new netbe_peek_recvlen() function to the net
backend API. The new function allows the virtio-net receive code
to know in advance how many virtio descriptors chains will be
needed to receive the next packet. As a result, the implementation
of the virtio-net mergeable rx buffers feature becomes efficient,
so that we can enable it also with the tap(4) backend. For the
tap(4) backend, a bounce buffer is introduced to implement the
peeck_recvlen() callback, which implies an additional packet copy
on the receive datapath. In the future, it should be possible to
remove the bounce buffer (and so the additional copy), by
obtaining the length of the next packet from kevent data.
Reviewed by: grehan, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23472
Document better this file, updating the URL to the IANA registry and closely
match the official services.
For system ports (0 to 1023) we now try to follow the registry closely, noting
some historical differences where applicable.
For the User ports (1024 - 49151) we try to keep some sensible balance only
of services that are likely to be found on FreeBSD/UNIX systems. This attempts
to strike a balance between complexity and usefulness.
As a side effect: drop references to unofficial Kerberos IV which was EOL'ed
on Oct 2006[1]. While it is conceivable some people may still use it in some
very old FreeBSD machines that can't be replaced easily, the use of it is
considered a security risk. Also drop the unofficial netatalk, which we
supported long ago in the kernel but was dropped long ago.
[1] https://web.mit.edu/kerberos/krb4-end-of-life.html
MFC after: 3 weeks (likely to 12-stable only)
Differential Revision: https://reviews.freebsd.org/D23621
environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
ACPI Control Method Batteries have a _BIF and/or _BIX object which
provide static properties of the battery. FreeBSD acpi_cmbat module
supported _BIF object only, which was deprecated as of ACPI 4.0.
_BIX is an extended version of _BIF defined in ACPI 4.0 or later.
As of writing, _BIX has two revisions. One is in ACPI 4.0 (rev.0) and
another is in ACPI 6.0 (rev.1). It seems that hardware vendors still
stick to _BIF only or _BIX rev.0 + _BIF for the maximum compatibility.
Microsoft requires _BIX rev.0 for Windows machines, so there are some
laptop machines with _BIX rev.0 only. In this case, FreeBSD does not
recognize the battery information.
After this change, the acpi_cmbat module gets battery information from
_BIX or _BIF object and internally uses _BIX rev.1 data structure as
the primary information store in the kernel. ACPIIO_BATT_GET_BI[FX]
returns an acpi_bi[fx] structure built by using information obtained
from a _BIF or a _BIX object found on the system. The revision number
field can be used to check which field is available. The acpiconf(8)
utility will show additional information if _BIX is available.
Although ABIs of ACPIIO_BATT_* were changed, the existing APIs for
userland utilities are not changed and the backward-compatible ABIs
are provided. This means that older versions of acpiconf(8) can also
work with the new kernel. The (union acpi_battery_ioctl_arg) was
padded to 256 byte long to avoid another ABI change in the future.
A _BIX object with its revision number >1 will be treated as
compatible with the rev.1 _BIX format.
Reviewed by: takawata
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23728
"Oops" - ln(1) is fine and dandy, but when you're using DESTDIR...it's not-
the path will almost certainly be invalid once the root you've just
installed to is relocated, perhaps to /.
Switch to install(1) using `-l rs` to calculate the relative symlink between
the two, which should work just fine in all cases.
MFC after: 1 week
Some ids are redundand because the list_ecaps() function decodes them
by explicit switch case. But listing them all makes it easier to not
miss ecaps, while not changing the functionality.
Initial submission by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
services: Add PROFInet and EtherCAT.
Both are admitedly very niche features and no known users exist currently.
I am doing a further review/update of the services file (see D23621) and
both of these are not likely to be considered.
This patch cleans up the API between the net frontends (e1000,
virtio-net) and the net backends (tap and netmap).
We move the virtio-net header stripping/prepending to the
virtio-net code, where this functionality belongs.
In this way, the netbe_send() and netbe_recv() signatures
can have const struct iov * rather than struct iov *.
Reviewed by: grehan, bcr, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23342
For historical reasons the "remote magtape protocol module" rmt gets
invoked as /etc/rmt, which is a symlink to /usr/sbin/rmt. Put it in the
utilities package, as /usr/sbin/rmt is.
Sponsored by: The FreeBSD Foundation
The previous expression borked if a username had a plus or hyphen in it.
This is needlessly restrictive- at leSt a hyphen in the middle is valid.
Instead of playing this game, let's just assume the username can't contain a
colon and mask out the second field.
Submitted by: sigsys gmail com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23548
This command was only ever for sparc64, so remove it. Remove
usr.sbin/Makeiile.sparc64 as well since it only references ofwdump
(cross platform) and eeprom.
Reivewed by: cy@, bcr@
Differential Revision: https://reviews.freebsd.org/D23593
